SUSPENSION
GM Metric Chassis Trailing Arm Bracket Kits
Aluminum Lowering Blocks Easily adjust ride height on leaf spring cars. Standard and adjustable styles are available in extruded or billet aluminum. Blocks are 2-1/2" wide x 5" long. Sold each.
Kits include rear upper and lower control arm mounts. Upper mount must be cut to desired height depending upon where housing is located in the chassis.
ALL56136
ALL56131
ALL56065
Part No.
Height
Pin Dia.
Extruded Aluminum ALL56130
1"
9/16" 9/16" 9/16" 9/16" 9/16"
ALL56131 ALL56132 ALL56133 ALL56134
1-1/2"
ALL60052
2"
ALL99282
ALL60052 ALL99282
2-1/2"
3"
Billet Aluminum ALL56060
3/4"
5/8" 5/8" 5/8" 5/8" 5/8" 5/8" 5/8"
ALL56061 ALL56062 ALL56063 ALL56064 ALL56065 ALL56136* ALL56138*
1"
1-1/2"
2"
2-1/2"
ALL60053
ALL99283
3"
ALL60053 ALL99283
1-1/2" Adj. 2-1/2" Adj.
5/8" * Pins on blocks can be adjusted 1-1/4" to the front or rear of center position.
Leaf Spring U-Bolt ALL68344 /HDIVSULQJ8EROW¿WVD[OHWXEHVKDVD 1/2" diameter and is 10" long. Heat treated steel bolt is sold each. Leaf Spring Shackles 6-hole brackets for mounting leaf springs are 9" long x 2" wide and have 1/2" diameter holes spaced 1" on center. Package of 2. Part No. Description ALL60055 Steel 1/4" Thick ALL60056 Aluminum 3/8" Thick U-Bolt Pads
ALL60054 ALL99284
ALL99284
ALL60054
Part No.
Description
ALL60052 ALL99282 ALL60053 ALL99283 ALL60054 ALL99284
Kit With Single Hole Lower In Stock Location
Brackets Only, 1 Pair
Kit With Single Hole Lower, Lowered To Increase Traction
Brackets Only, 1-Pair Kit With Multi-Hole Lower Brackets Only, 1-Pair
Lower Spring Cup ALL56124 Welds to 3" diameter rear end tube and works with conventional 5" coil springs. Length is 7". Sold each. Clamp-On Lower Spring Pad ALL56127 6WHHOFODPSRQOHDIVSULQJSDG¿WVGLDP - eter axle tubes. Pad measurements are the same as ALL56126. Sold each. Leaf Spring Pad ALL56126 Welds to 3" diame- .500" DIA . .625" DIA . .500" DIA .
ALL60055 ALL60056
8QLYHUVDOVW\OH8EROWSDGV¿WGLDPHWHUD[OHWXEHVDQGOHDI springs up to 2-1/2" wide using 1/2" U-bolt fasteners. Center alignment hole is 5/8" to accept most lowering blocks or spring bolts. 1/4" thick formed steel pads have a gusseted shock mount with a welded bung to accept 1/2" mounting hardware.
ter rear end tube and works with most leaf springs. Sold each.
ALL60037
ALL60036
ALL60038
2.500"
Part No.
Description
ALL60036 ALL60037 ALL60038
RH Pad LH Pad
1.375"
2.875"
4.375"
5.750"
Dual Mount Pad
120 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker