SUSPENSION
Leaf Spring Slider Box ALL60034
Leaf Spring Slider Box ALL60035 Replace rear leaf spring shackles with Allstar’s leaf spring slider box. Bolt-in slider box with roller bear- ing design eliminates leaf spring binding, freeing up car. Fits 2-1/2" wide Chrysler type leaf springs.
Leaf spring slider box replaces conventional leaf spring shackles to enable effortless suspension movement and prevent binding. Box may be welded, or bolted directly to chassis and includes two nylon bushings with spring mounting hardware. Fits 2-1/2" wide Chrysler type leaf springs. Part No. Description Replacement Part ALL99055 Bushings, 2-Pack Tubing Notchers Notchers render precise joints for more consistent welds and stronger cages. Available in deluxe aluminum or economy steel versions, notchers accept up to 2" diameter stock and automatically align and center tubing. Use in drill press or with hand drill. Notch- ers adjust up to 45°. Part No. Description ALL10400 Deluxe Aluminum ALL10411 Economy Steel Replacement Parts ALL10402 5/8"-18 Thread Adapter ALL10403 Arbor Support Bushings (Pair) ALL10404 Arbor With 1/2"-20 Thread Optional Parts ALL10405 Arbor With 5/8"-18 Thread ALL10406 Drill Press Mount (ALL10411 Only) ALL10407 Arbor Support With Needle Bearings Note: Tubing notchers include 1/2"-20 arbor thread and 5/8"-18 adapter. Hole saws up to 1-1/8" diameter use 1/2"-20, larger hole saws use 5/8"-18 thread. Hole Saw Set ALL10412 Use with tubing notchers. Does not include an arbor for a hand drill. Set includes one of each size: 3/4", 1", 1-1/8", 1-1/4", 1-1/2" 1-5/8" and 1-3/4". Part No. Description Individual Hole Saws ALL10413 3/4" ALL10414 1" ALL10415 1-1/8" ALL10416 1-1/4" ALL10417 1-1/2" ALL10418 1-5/8" ALL10419 1-3/4" Note: Hole saws up to 1-1/8" diameter use 1/2"-20 thread, larger hole saws use 5/8"-18 thread. Digital Level ALL10742 ALL10400
TOOLS AND PIT EQUIPMENT
Digital Level ALL10744 Digital level with powerful mag- netic base measures the angle of a single straight surface or the angle
of a joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when level is in an upside down position. Powered by three 3V CR2032 batteries (includ- ed). 6" x 2.25" x 1.25". Smart Tool ALL10113
Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles. Pow- ered by a standard 9 volt battery. Smart Tool Tray ALL10740 Aluminum tray is a nice addition when using Smart Tool on 7/8" and 1" O.D. trailing arms or suspension tubes. Plastic clips allow tray to snap to tube when in tight areas. A bubble level helps provide accurate readings. Level Base ALL10741 /HYHOEDVHVLPSOL¿HVQRWFKLQJ and bending of round tubing and helps ensure accuracy. Base fastens to standard ballast or weight brackets and clamps to the tube as a refer- ence point when creating parallel, perpendic- ular, any angle of opposing notches or bends during fabrication. Base accepts most digital levels including ALL10113, ALL10742 and ALL10744 or standard bubble levels. Part No. Description Individual Mounting Brackets ALL14192 1" ALL14193 1-1/4" ALL14194 1-3/8" ALL14195 1-1/2" ALL14196 1-5/8" ALL14197 1-3/4"
Digital scale and mounting bracket sold separately.
Digital level with magnetic base measures the angle of a single straight surface or the angle of a joint between two straight surfaces. Displayed value on the LCD screen rotates to right side up when digital level is in an upside down position. Powered by three 3V CR2032 batteries (included). 2" x 2" x 1".
ALL14195
121
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker