TOOLS AND PIT EQUIPMENT
Rivet Gun Adapter For Cordless Drill ALL18205
Quick Turn Fastener Wrench ALL19400 The Allstar quick turn fastener
Adapter is for reversible cordless drills and greatly speeds up the installation of “blind” rivets commonly used when building race car bodies. Tool is a real
ZUHQFK¿WVVORWKHDGIDVWHQHUVDQG reduces the risk of body panel or fas- tener damage when using screwdrivers for loosening or tightening. Features a non-slip handle. Quick Turn Spring Adjuster ALL19405 This tool is a must when adjusting tension of quick turn springs. Simply turn knob on adjust- er to evenly pull or push spring without kinking or breaking spring. Transfer Punches For use with quick turn fasteners, place transfer punch in a weld plate or body panel. Position panel over top of punch and lightly tap with a hammer leaving a mark on the panel where hole is to be drilled. Part No. Description
hand and time saver compared to hand operated rivet guns and is designed for use with all rivets up to 3/16" including 3/16" aluminum mandrel rivets but not recommended for 3/16" steel mandrel rivets. Adapter includes nosepieces for installing 3/32", 1/8", 5/32" and 3/16" rivets. Threaded Insert Tool Kit ALL19450 Tool works with a cordless drill to install a threaded insert into a panel or bracket. Inserts are helpful when the back- then place the insert into the hole and tighten using any cordless drill. Once the insert is compressed, reverse the drill and remove the mandrel from the insert. Kit includes mandrel and nosepiece for 1/4"-20, 5/16"-18 and 3/8"-16 inserts, other sizes available separately. Threaded inserts sold separately. Part No. Description ALL19452 Mandrel and Nosepiece for 8-32 ALL19453 Mandrel and Nosepiece for 10-24 ALL19454 Mandrel and Nosepiece for 10-32 ALL19455 Mandrel and Nosepiece for 1/4"-20 ALL19456 Mandrel and Nosepiece for 5/16"-18 ALL19457 Mandrel and Nosepiece for 3/8"-16 Threaded Inserts ALL19454 side of the panel is not easily accessible. Simply drill the correct size hole, install the threaded insert onto the mandrel
ALL19402 For 5/16" Fasteners ALL19403 For 7/16" Fasteners
Quick Turn Spring Fixture Accurately drill panels when installing
ALL19407
quick turn fastener springs. Start with a 1/4" cen- WHUKROHDQGXVHWKH¿[WXUHWRORFDWHDQGGULOO holes for mounting the springs. Size listed is spring center to center distance. Part No. Description
ALL19406 Fixture For 3/4" Spring ALL19407 Fixture For 1" Spring ALL19408 Fixture For 1-3/8" Spring
Steel inserts are helpful when the backside of the panel is not easily accessible. Inserts work great for frequently removed items including gauge panels, switch panels, access panels and body panels or when mounting items to trailer walls. Inserts are designed for installa- tion using insert tool ALL19450 with coordinating mandrel and nosepiece. Package of 10.
Taper Reamers Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle. Part No. Description ALL11170 Reamer, 7.15°, 1-1/2" Taper Per Ft. ALL11172 Reamer, 9.56°, 2" Taper Per Ft. Spindle Checker Tools Assure correct alignment of the upper and lower ball joint when checking for bent spindles. ,QVHUWVOXJVLQWRVSLQGOHDQGJXLGHURGZLOO¿W through slugs if spindle isn’t bent. Kits ¿WPRVWDIWHUPDUNHWUDFHDQG*0 stock metric spindles. Part No. Description ALL11176 Kit With GM Lower, 2" Taper ALL11177 Kit With Chrysler Lower, 1-1/2" Taper ALL11184 Kit For GM Metric, 2" Taper Related Components ALL99140 GM Lower Slug With Nut (2" Per Ft.) ALL99141 Chrysler Lower Slug With Nut (1-1/2" Per Ft.) ALL99158 GM Metric Lower Slug With Nut (2" Per Ft.) ALL99142 Upper Slug With Nut (1-1/2" Per Ft.) ALL99159 GM Metric Upper Slug With Nut (2" Per Ft.) ALL99143 Replacement Guide Rod
Body Length (Before Comp.)
Part No.
Thread Size Pilot Hole Size
Grip Range
ALL19460 8-32 ALL19461 10-24 ALL19462 10-32 ALL19463 1/4"-20 ALL19465 5/16"-18 ALL19467 3/8"-16
17/64"
Up To .080" Up To .130" Up To .130" Up To .165" Up To .150" Up To .150"
.420" .475" .475" .580" .690" .690"
5/16" 5/16"
13/32"
7/32" 7/32"
Cleco Pliers ALL18220 Unique tool readily installs and removes Cleco fasteners.
124 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker