Double Shear Roller Bearing Birdcages These fully-assembled, perfectly-aligned, ready-to-install birdcages are shipped with all bolts, bushings, shock mounts, and retainers
XD Series Steel Bearing Birdcage BSB7110 New design allows the retaining ring to be mounted directly against the race of the roller bearing. This helps spread the load on the bearing and makes the birdcage more stable. Two-piece design allows for easy repairs and accepts 5/8” rod ends. Comes complete with shock mount, retaining rings, and rod end spacers. Part No. Description Replacement Components BSB7110-1 Top 4-Link Plate BSB7110-6 Lower 4-Link Plate Single Bearing Swingarm BSB7431 Design uses a large, single bearing and two, WKLFNVWHHOSODWHVDOORZLQJDURGHQGWR¿W tightly between the plates. Sold complete with retaining rings. Two-link, used on IMCA Sport Mods and other applications, allows use of 5", 6", and 7" shock drops. Double shear plate design provides added strength and the ability to replace damaged parts. Two-piece, ring design in- cludes (5) 3/8" bolts that hold plate to ring. Clamp Bracket BSB7326 Double-sided bracket features a two- piece, split design for easy installation. Just two bolts are required to add or remove bracket. Right Spring Buckets BSB7451 Spring buckets clamp to axle tube, pro- viding provisions for coil spring mounting. Buckets have a 2" tall cup and offer 6" of shock drop. Set bolts are used to secure the buckets to the axle. Double Shear Two-Link For Northern Sport Mods BSB7350
required for installation. Straight edge on 4-Link plate allows for perfect in- dexing of the birdcage. 4-Link bushings are cut to accept dust boots, and the 4-Link bolts are counter sunk to clear the bearings. Sold each. Part No. Description BSB8025R Double Shear Roller Bearing Birdcage, Right Side Narrow (4") BSB8026L Double Shear Roller Bearing Birdcage, Left Side Narrow (4") BSB8020R Double Shear Roller Bearing Birdcage, Right Side Wide (5") BSB8021L Double Shear Roller Bearing Birdcage, Left Side Wide (5") Replacement Components BSB8020-1 Double Shear 4-Link Plate, Right BSB8021-1 Double Shear 4-Link Plate, Left BSB8020-2 Double Shear Shock Plate BSB8020-3 Double Shear, 1/4" Top Plate BSB8020-4 Double Shear, 1/4" Bottom Plate BSB8020-6 4-Link Bushing, Each BSB8020-7 4-Link Shock Bushing, Each Single Shear Bearing Birdcage BSB7302
New hub design allows mounting to inner race of the bearing for higher side loads. Manufac- tured from 1/2" thick high-alloy steel plate with 3.008" roller bearing. Will work on both sides of the car and has adjustable upper mounts. 5"-6" shock drop on front side of axle and 6"-7" drop on back side of axle. Drilled with 5/8"
holes for rod ends, birdcage includes two retainer rings, two 4-link bushings, and two standard shock mounts with stud kits. XD Bearing Birdcage New XD Bearing Birdcage design provides more forward
and side bite, while also preventing any possibility of bind between bearings, birdcage parts, or axle tube. Lightweight assembly is manufactured using high-al- loy, 1/2" steel plates with a 3" overall width (4" overall with included retainer
rings). Assemblies accept 5/8" rod ends and are sold complete with retainer rings, bushings, and two clevis nuts. May be pur- chased with or without shock mounts.
Without Shock Mounts Part No. BSB8370-L
With Shock Mounts Part No. BSB83702-L
Description
Drop Shock Mount BSB7206 Drop Shock Mount is engineered for use with steel bird cages.
XD Bearing Birdcage, Left XD Bearing Birdcage, Right
BSB8370-R BSB83702-R
Bearing Locator Kit BSB7320-4 Locator kit reduces friction on birdcage, allowing side loads to transmit to bearing. Sold as a set.
209
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker