Circle Track Parts & Accessories

Clamp-On Column Mounts Lightweight aluminum (1.2 lbs.) steering column mount clamps to tubing and accepts 3/4" steering shaft. Part No. Description HOW91997 Fits 1.75" Tubing HOW91998 Fits 1.50" Tubing Stealth HD 2:1 Steering Quickener HOW522B2 Uses a multiple gear with increased tooth contact area to dramatically improve durability and performance. Compact, lightweight quickener is 2-3/4" in diameter, weighs 2 lbs., and has 36-spline LQSXWDQGRXWSXWVKDIWV$QLQOLQHLQSXWDQGRXWSXWUHGXFH friction and gear load. Basic Steering Quickener An inexpensive, compact quickener weighing only 2.0 lbs. Features alloy steel gears and a unique tooth design for added durability. Housing is 2-5/8" in diameter, and has VSOLQHVKDIWV Part No. Description HOW5224 2:1 HOW5225 1.5:1 Easy Adjusters $GMXVWHUV¿WDQ\FDUDQGPD\EH adjusted with a 3/8" drive wrench. &KRLFHRIRULJLQDORUQHZVW\OHIRU use on sway bars up to 1-3/8" dia. ORIGINAL STYLE SWAY BAR ADJUSTER Slide it in and weld the threaded bushing in place. Part No. Description HOW23997 Original Style Howe Sway Bar Adjuster HOW24097 Replacement Bolt And Eye Assembly NEW STYLE SWAY BAR ADJUSTER HOW23990 Compatible with most chassis, adjuster bolts on the right side of the frame. Sway bar rate is set by moving the adjuster ahead and back. Sway Bar Eyes Sway bar eyes are offered in two versions. Part No. Description HOW2397 Sway Bar Eye For 1" Or 1-1/4" Dia. Sway Bars HOW23972 Sway Bar Eye For 1-3/8" Or 1-1/2" Dia. Sway Bars Sway Bar Clamps Billet aluminum sway bar clamps prevent changes in rate and pre-load. Install on the inside of each sway bar mounting bolt to prevent shifting. Sold individually. Part No. Description HOW23700 1-1/8" I.D. HOW23704 1-1/4" I.D. HOW23705 1-3/8" I.D. HOW23702 1-1/2" I.D.

Sway Bars Part No.

Descripton

Dimensons

Bar Width

Rate

Lightweight Tubular Version Of Original Howe Design Sway Bar

HOW23714

1-1/4"

46.5" 385 lbs.

HOW23794 One Piece Adjustable Rate Sway Bar HOW23795 One Piece Adjustable Rate Sway Bar

1-1/4"

45.5" 385 to 578 lbs. 45.5" 534 to 802 lbs.

1-3/8"

Replacement Components

HOW236971

HOW23698

Part No.

Description

Sway Bar Wear Block Kit, Contains Two Bars, Four Bolts And Two Nuts Sway Bar Frame Mount With Bolts, Sold Each

HOW236971 HOW23698 HOW23925 HOW23980 HOW23996

Sway Bar Bushing, Delron For Fixed Spline Bar, Sold Each Sway Bar Adjustable Eye, For Splines Bar, Sold Each

Sway Bar Easy Adjust Weld Nut, For HOW23997 And HOW23951, Sold Each

Threaded Aluminum Hex Tubing Extruded 5/8" or 3/4" O.D. threaded aluminum hex tubes are JURRYHGRQRQHÀDWWRDOORZFRXQWLQJRIWKHWXUQVQHHGHGIRU adjustments. Length 5/8" Hex Tube 3/4" Hex Tube 10" HOWR3310 — 11" HOWR3311 — 12" HOWR3312 — 13" HOWR3313 — 14" HOWR3314 — 15" HOWR3315 — 16" HOWR33116 HOW30616 17" HOWR33117 — 18" — HOW30618 20" — HOW30620 22" — HOW30622 24" — HOW30624

Rubber Suspension Bushings Use in place of rod ends to cushion suspen- sion forces or to induce rear steer. Bush- ings are 2.4" wide with a 3/4" hole. Part No. Description HOW31865R 3/4"-16 RH, Straight HOW31865L 3/4"-16 LH, Straight

Spring Cage HOW30209 Lightweight aluminum spring cage is used to pre- load 3" x 10" coil-over spring independently from the shock absorber for softer rates and added grip. Also VLPSOL¿HVVKRFNRUVSULQJFKDQJHV

413

2019-20 CIRCLE TRACK PARTS AND ACCESSORIES

Made with FlippingBook flipbook maker