Coil-Over Racing Spring Rubbers Make quick, precise rate changes to any 2-1/2", 5", or 5-1/2" diameter springs. Made of polyure- thane in three hardnesses.
Trailing Arm Easy Adjusters Perform large or small pinion changes by simply loosening the 3/4" trailing arm bolt DQGWXUQLQJWKH¿QHWKUHDGDGMXVWHUXSRU down 1/16" per turn. Offered in original or ORZSUR¿OHGHVLJQVPRXQWVDWWDFKWRWKH frame with two 5/8" bolts. Part No. Description HOW318927R Right Side, Original HOW318927L Left Side, Original HOW318928R Right Side, Low Profile HOW318928L Left Side, Low Profile
HOW318927R
2-1/2" Dia. Part No.
5"/5-1/2" Dia. (Up to 850#) Part No.
Description
Soft Spring Rubber Medium Spring Rubber Hard Spring Rubber
HOWSA4310 HOWSA4915 HOWSA5720
HOWSA1310
—
HOWSA1620
5” Coil-Over Adapter HOW30203 5" coil-over adapter allows using existing 2-1/2" coil- over hardware from AFCO, Bilstein, and Pro, adapting them for use with a 5" spring. Powder coated adapter LVYHU\VWURQJ\HWOLJKWZHLJKW6ROGLQGLYLGXDOO\ WZR required per spring. Lower Spring Cups Spring cups, which bolts to axle tube, are offered to accept 2-1/2" or 5"/5.5" springs. Part No. Description HOW30391 Lower Spring Cup, Accepts 5"/5.5" Spring With HOW31991 HOW30392 Lower Spring Cup, Accepts 2-1/2” Spring With HOW31991
5/8" Threaded Bushing, 2-1/4" Long Bushing Welds Into Frame Rail 4" Apart
HOW31899
Steel Bird Cages 'HYHORSHGZLWKWKHLQSXWRIGLUWPRGL¿HGUDF - ers, steel bird cages incorporate inner bearings to keep weight at a minimum, and are available WR¿WDZLGHYDULHW\RIFKDVVLV6WDQGDUGELUG cage weighs 10.96 lbs., and features an integral and adjustable shock mount. Optional high-trav- el shock mount may be used with the Standard bird cage. Part No. Description HOW31999 Standard Bird Cage HOWCO394 Stock Replacement Hubs 6XUHWREHSRSXODURQ0RGL¿HGVWKHVHOLJKW weight durable two-piece cast 5 x 5 hubs are direct replacement for original equipment units. Two-piece design allows using virtually any popu- lar 8-bolt racing rotor. Part No. Application HOW205350 Pinto Spindle Hub Assembly, Includes Hub, Bearings, Races, Seal, Studs, Bolts And Dust Cover HOW205351 Impala Spindle Hub Assembly, Includes Hub, Bearings, Races, Seal, Studs, Bolts And Dust Cover HOW205345 Chevelle Spindle Hub Only With Races And Studs Installed HOW205346 Impala Spindle Hub Only With Races And Studs Installed Bolt-In Mount Block For HOWC0393
Bump Stop Tech 101 HOW89010
Professionally produced by Tony Blanchard of Race 101, DVD illustrates the basic prin- cipals and fundamentals of using bump stop set-ups.
Lightweight Steel Panhard Mounts Strong, lightweight steel mounts have threaded holes on each side for quick, easy Panhard FKDQJHV%ODFNDQRGL]HGPRXQWV¿WRU 2" square or rectangular tubing and weigh just over 2 lbs. Bolts are included. IMCA legal. Part No. Description HOW30781 Panhard Mount, 2" x 2"
Pinto/Mustang II Caliper Mounts Used with the HOW205350 hub, heavy-duty, ELOOHWVWHHOPRXQWV¿WWKHSRSXODU 3LQWR 0XVWDQJ,,VSLQGOHDQGDFFHSW GM D52 or Metric calipers with an 11-3/4" racing brake rotor. Part No. Description HOW34052 GM D52 Caliper Mount HOW34055 GM Metric Caliper Mount 4-Piston To GM D52 Caliper Bracket HOW34050
HOW30782
Panhard Mount, 1-1/2" x 1-1/2"
Cast Steel Panhard Mount HOW30780
HOW34052
Mount clamps to 1-3/4" tubing. Light as alumi- num, but legal where aluminum is not allowed. Cast Steel Clamp-On Trailing Arm Mount HOW31991 Cast steel, two-piece mount has 50% more clamp- ing power than aluminum mounts. Trailing arm holes are threaded 3/4"-10 and the shock mounts are 1/2"-13.
Designed for Wide 5 applications, .100" offset hybrid caliper bracket adapts 4-pis- ton brake application to GM D52 calipers. Meets various track or sanctioning body rules.
414 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker