Engine Mount Spacers Lightweight billet aluminum spacers eliminate the need to use stacks of heavy steel washers. Sold per pair. Part No. Description JOE10966 1/2" Thick Spacers JOE10968 1" Thick Spacers JOE10978 2" Thick Spacers Valve Cover Fasteners Remove and replace valve covers quickly. The spring ball on an extension holds them while they are installed on each stud. Offered in 4- or 8-packs with 1/4"-20 (coarse) or 1/4"- ¿QH WKUHDGV Part No. Description JOE34350 1/4"-20, 4-Pack JOE34352 1/4"-28, 4-Pack JOE34349 1/4"-20, 8-Pack Throttle Pedal Assembly Pedal assembly offers comfort and adjustability with a linkage block that acts as an adjustable side foot rest. Includes return spring and two adjustable stops, one for full throttle and one for return. Throt- tle pull-back may be purchased separately. Part No. Description JOE33600 Throttle Pedal Assembly JOE33620 Throttle Pull Back Only JOE33700 Throttle Cross Shaft Bell Crank Assembly JOE33720 Throttle Pedal, Bell Crank And Linkage Assembly Air Cleaner Stud Kit JOE34306 Stainless steel 5/16"-18 stud will not break like mild VWHHOXQLWV7DSHUHGQXWLPSURYHVDLUÀRZWRWKHFDUE while the air cleaner nut includes an O-ring for sealing out dirt and contaminants.
Fuel Filler Machined from billet 6061-T6 aluminum, IXHO¿OOHULQFOXGHVDJDVNHWHGWKUHDGLQFDS DQGVWURQJ¿OOHUQHFNIRUVDIHUHDVLHUUHIXHO - ing. Choose from three different designs. Part No. Description JOE13200 Star Pattern JOE13201 Skull And Bones JOE13202 Five Pocket
JOE13201
Sway Bar Mount JOE11905 Zinc-plated mount is manufactured from 7/8"-9 threaded x 10" long stock and includes a 2-1/8" eyelet welded on the end. Includes (2) jam nuts.
Sway Bar Bushings Premium bearing quality bushings prevent binding. Part No. Description JOE11910 1" I.D. x 2-1/8" O.D. JOE11915 1-1/4" I.D. x 2-1/8" O.D. JOE11920 1-1/2" I.D. x 2-1/8" O.D. JOE11925 1-3/4" I.D. x 2-1/8" O.D. Swivel Eye And Threaded Stem Special swivel eye unbolts, allowing quick sway bar changes while also preventing bind- ing. Part No. Description JOE11970 Swivel Eye, 1-1/2" I.D. JOE11975 Swivel Eye, 2-1/8" I.D. JOE11980 1-1/2" Swivel Eye Only JOE11985 2-1/8" Swivel Eye Only JOE11990 Shaft Only, 7/8"-9 Sway Bar Adjuster Bolt the sway bar slider mount-style adjuster on both sides for perfect alignment of big or standard sway bars. Swivel eye allows dropping the bar out the bottom for quick set-up changes. Part No. Description JOE11950 Sway Bar Slider Mount Adjuster, 1-1/2" Dia. JOE11955 Sway Bar Slider Mount Adjuster, 2-1/8" Dia. Panhard Mount JOE11100 Panhard Mount is CNC-machined from billet aluminum for durability. Mount design allows simply loosening the bolts for Panhard bar adjustment. Designed for use with 1-3/4" diameter bars. Trailing Arm Mount JOE11402 Trailing arm mount includes an added ERWWRPKROHIRULQFUHDVHGÀH[LELOLW\DOORZLQJ close-mounting to the tire and wheel. Axle centerline to the shock mount measures 6-5/8"
Carburetor Linkage Assembly JOE34200 23" long, as- sembly includes
a heat-treated aluminum tube, rod ends, bolts, springs, and carburetor.
Fuel Cup JOE34500 Ideal for jet changes or carburetor service, IXHOFXSFDWFKHVIXHOGXULQJÀRDWERZOUHPRY - DOVRLWFDQGUDLQEDFNLQWRÀRDWERZOWKURXJK vent tube.
vertically. Steel boss and 1/2" stud provide secure shock retention. Mount clamps to 3" diameter axle tubes.
449
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker