Rubber Base Vent Filters Filters clamp to metal or plastic for use on en- gines, transmissions and rear ends. Vents have chrome tops and include clamp. Part No. Application Flange I.D. O.D.
Wrench-Off Oil Filters )LOWHUVGHOLYHUKLJKYROXPHSRVLWLYHRLOÀRZZLWK low restriction and provide the proper balance between engine protection and oil pump drag. An inner element traps contaminants as small as 10 microns. Flow rates are between 12-16 GPM GHSHQGLQJXSRQ¿OWHUVL]H DQG¿OWHUVKDYHXSWR 550 PSI of hydrostatic burst strength. Part No. Description KNEHP-3001 Ford KNEHP-3002 Chevrolet KNEHP-5001 Steel Base Vent Filters &UDQNFDVHYHQW¿OWHUVZLWKYHQWWXEHV swaged into base, press into vent hoses or grommets. Filters with mounting stud are ideal for remote mounting.
Height
Shield
KNE62-1320 Trans./Rear End 3/8" KNE62-1330 Trans./Rear End 1/2" KNE62-1340 Trans./Rear End 5/8" KNE62-1360 Trans./Rear End 3/4"
2" 2" 2" 2" 2" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3" 3"
1-1/2" 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2-1/2" 2-1/4" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2" 2-1/2"
No No No No No No No No No No
KNE62-1370 Trans./Rear End KNE62-1390 Trans./Rear End KNE62-1420 Trans./Rear End
1"
1-1/4"
1"
Remote Mount Replaces Fram HP-6
KNE62-1440 KNE62-1460 KNE62-1490* KNE62-1511 KNE62-1512 KNE62-1513 KNE62-1514 KNE62-1515 KNE62-1516*
Crankcase Crankcase Valve Cover Valve Cover Valve Cover Valve Cover Valve Cover Valve Cover Valve Cover
1-3/8" 1-1/2" 1-1/4" 1-1/4" 1-3/8" 1-1/2" 1-3/4" 1-1/4" 1"
Yes Yes Yes Yes Yes Yes
Vent Hose I.D.
Filter O.D.
KNE62-2470 Trans./Rear End 5/16" 1-3/8" 1-1/8"
No No
Part No.
Application
Height
KNE62-2480 Trans./Rear End
9/16" 1-3/8" 1-1/8"
KNE62-1000 KNE62-1010 KNE62-1020 KNE62-1030 KNE62-1040 KNE62-1090* KNE62-1100* KNE62-1110* KNE62-1160 KNE62-1170
Fuel Cell/Rear End, -8AN Fuel Cell/Rear End, -10AN Fuel Cell/Rear End, 5/8" Hose Fuel Cell/Rear End, 3/4" Hose Fuel Cell/Rear End, 1" Hose
3/8" 2" 1-1/2" 1/2" 2" 1-1/2" 5/8" 2" 1-1/2" 3/4" 2" 1-1/2" 3/8" 2" 1-1/2" 1/2" 2" 1-1/2" 5/8" 2" 1-1/2" 3/4" 3" 2" 1" 2" 1-1/2"
* Push-in rather than clamp-on breather
Stubstacks Reduce turbulence and improve metering response of carbu- retors. Part No. Description KNE85-0200 4bbl. Holley 4150/4160 With Choke Horn KNE85-0210 2bbl. Holley 2300 KNE85-0400 4bbl. Holley 4150/4160 Without Choke Horn
Fuel Cell/Rear End Fuel Cell/Rear End Fuel Cell/Rear End Fuel Cell/Rear End Fuel Cell/Rear End
1" 3" 2" KNE62-1519 Valve Cover, Push-In With Shield 3/4" 3" 2-1/2" KNE62-1520 Valve Cover, Push-In With Shield 1" 3" 2-1/2" * Filter includes mounting stud.
Pro Series III Aluminum Power Steering Pumps 7KH3UR6HULHV,,,DUHDPRQJWKHPRVWHI¿FLHQW power steering pumps currently available. Pul-
Elite Series Power Steering Pumps Developed for Late Models, Super Late 0RGHOVDQG0RGL¿HGVQHZ(OLWH6HULHV pump saves 4 to 6 horsepow- er. Affordable pump features D FFÀRZYROXPHDQGQLQH OHYHOVRIÀRZDGMXVWPHQWIRU truly custom tailored steering feel. Pumps include GM Type 2 standard bolt pattern and accept GM press-on pump pulleys. Also available in kit form, complete with mounting bracket and required hardware. Part No. Description Power Steering Pumps KRCESP10096000 Elite Series Pump KRCESP10096100 Elite Series Pump With Bolt-On Tank Power Steering Pump Kits (Includes Pump With Pulley, Reservoir And Mounting Bracket) KRCESP18010115 Power Steering Kit, SB Chevy Block Mount, 6" V-Belt Pulley KRCESP19010115 Power Steering Kit, SB Chevy, Remote Tank, 6" V-Belt Pulley
ley-driven, 9.6cc aluminum-bodied pumps feature three different pressure relief valve options, 1,200 PSI, 1,450 PSI, and 1,600 PSI to accommodate race cars with high-geared steering systems that operate at lower pressures. Pulley and mounting bracket kit must be purchased separately. Part No. Description KRC29116811 Pro Series III Pump, 9.6cc KRC29116813 Pro Series III Pump With Bolt-On Tank, 9.6cc Related Components KRC20011000 6.0" V-Belt Pulley, All KRC Aluminum Pumps KRC20015000 4.2" 6-Rib Serpentine Pulley, All KRC Aluminum Pumps KRC20017600 6.0" 6-Rib Serpentine Pulley, All KRC Aluminum Pumps KRC82308032 32-Tooth/30mm Wide HTD Pulley, All KRC Aluminum Pumps KRC82308040 40-Tooth/30mm Wide HTD Pulley, All KRC Aluminum Pumps KRC89008040 Rock Guard With Screws For 40-Tooth HTD Pulley
462 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker