Trailer Ramps Lightweight and durable, specially designed trailer ramps allow loading low-slung race
Track And Trailer Combo RMPRR-80-10-2 Track and Trailer Combo set includes (2) two-piece ramps/ stands. It can be used to work on the car in the garage, load it
cars into trailers without the worry of damaging noses, oil pans, headers, etc. Simply place the trailer door on the notch of the ramps to decrease the angle of approach to as little as 4° and load car. Sold in pairs. Part No. Description RMPRR-TR-4 46" Long x 4" High x 14" Wide, 5.5° Incline RMPRR-TR-5 67" Long x 5" High x 14" Wide, 4° Incline RMPRR-TR-6 45" Long x 6" High x 14" Wide, 7.8° Incline RMPRR-TR-7 74" Long x 7" High x 14" Wide, 5.2° Incline RMPRR-TR-7-FLP Trailer Ramps, 74" Long x 7" x 14" Wide, Flap Cutout To Accommodate Door Flap, 5.5° Incline RMPRR-TR-8 54.75" Long x 8" High x 16" Wide, 8.4° Incline RMPRR-TR-9-FLP Trailer Ramps, 95" Long x 8" High x 14" Wide, Flap Cutout To Accommodate Door Flap, 5.5° Incline Trailer-Mates Eases tie down of low ditional ground clearance. Typically used to allow car door to be opened when trailer wheel well clearance is desired. Designed for use on the front end of the car. Sold in pairs. Part No. Description RMPRR-TM-FRT 36" Long x 3" High x 14" Wide, 10.79° Incline RMPRR-TM-FRT-3 40" Long x 3" High x 14" Wide, 7° Incline ground clearance race cars to trailer by adding 2-3" of ad-
into the trailer, or as wheel cribs in place of jack stands. Bottom portion of the ramp may be removed for easy side access. Each 2-piece ramp is 80"L x 14"W x 10"H, and supports up to 6,000 lbs., yet weighs just 17 lbs. each.
Trailer Side Kick RMPRR-TR-SK-1 Dual-purpose Trailer Side Kicks serve two IXQFWLRQV ¿UVWWRVLWLQIURQWRIWKHWUDLOHU¶V wheel wells, helping you guide the car onto the trailer. Secondly, in the HYHQWRIDÀDWWUDLOHUWLUHLWPD\EHXVHG
as a ramp for changing a tire. Simply drive the good tire onto the UDPSDQGWKHÀDWWLUHZLOOEHOLIWHGRIIRIWKHJURXQG7UDLOHU6LGH Kick is 31" long x 12" wide x 7.5" high.
FlatStoppers RMPRR-FS-10 Engineered to prevent tires from ÀDWVSRWWLQJGXULQJORQJSHULRGV
of storage. Once you drive the car onto FlatStoppers, the tires settle into the concave depression, which supports the tire, better dispers- LQJZHLJKWDQGSUHYHQWLQJÀDWVSRWWLQJ)ODW6WRSSHUVDUH long x 3.25" high x 10" wide and sold in sets of four. Wheel Chocks
Rally Ramps RMPRR-30 Designed for smaller cars with short noses, Rally
Ramps are great for quick oil changes or under body maintenance. Ramps,
Solid rubber wheel chocks increase safety, preventing car from rolling while in trailer or in pits. Ideal for use with all Race Ramps. Part No.
measure 30" long x 5" high x 10" wide, and include a built-in cradle that accommodates tires up to 8" wide and have a capacity of 6,000 lbs. Sold in pairs.
Description
RMPRR-RC-5 RMPRR-WC-2
Racer Chock, 10" L. x 5" H. x 12" W., Each Wheel Chock, 6" L. x 4" H. x 5" W., Pair
Scale Ramps Ramps rise 2-1/2"
Trak-Jax Trak-Jax get low-slung cars high HQRXJKWR¿WDVWDQGDUGÀRRUMDFN under the car. Sold in pairs, Trak- Jax are 30.1" long x 3" high x 12" wide. Weigh just 5 lbs. each. Part No.
to work with virtually all racing scales. One solid piece offers strength and stability, and the small, 7.8° incline allows the vehicle to be easily rolled up or down. Ramps are offered with or ZLWKRXWÀDWSODWIRUPDUHD Part No. Description RMPRR-SCALE 14" L. x 2.5" H. x 12" W. (No Platform), Qty. 4 RMPRR-SCALE-2 30.1" L. x 2.5" H. x 12" W. (12.5" Long Platform), Qty. 2
Description Trak-Jax
RMPRR-TJ RMPRR-TJ-S
Trak-Jax, With 1.5" Stop
CORY PRESSLER
JAY FREET
CHARLIE HANNA
650 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker