Aluminum Quick-Change Pinion Mount With Climber WEHWM205 Single-side pinion mount features a climber on an arc. Aluminum Dual-Usage Quick-Change Pinion Mount WEHWM205DU Mount is manufactured with two identical sides, allowing it to be UHPRYHGDQGÀLSSHGLQWKHHYHQWWKDW it is damaged due to a crash. Sold complete with climber hardware. Part No.
Quick-Change Pull Bar Brackets WEHWM292QC Triple-slot pull bar bracket incorporates quick-adjust technology. Slots are located 1" in front of axle center, and 1" and 3" behind axle centerline. Sold in pairs with (2) adjust pucks, brackets also include 90/10 shock hook-up provisions. Steel Ford 9" Arc Pinion Mount WEHWM230 For use on popular Ford 9" rears, pin- ion mount includes a 3" climber slot on an arc that provides quick adjustments, while helping keep car tracking straight. Steel Quick-Change Pinion Mount WEHWM407 Rigid billet steel pinion mount moves the J-bar slot tight to the center section. Incorporates seal to eliminate the need for a seal plate. Includes hardware. Steel Quick-Change Pinion Mount WEHWM419 Identical to the WEHWM219 pinion mount, yet machined with an incorporat- ed seal, eliminating the need for a seal plate. Includes hardware. Angled Pinion Mount With Climber WEHWM197
Description
Related Components WEHWM205CG
Climber Gear
WEHWM205BK
Bolt Kit For Aluminum Pinion Mounts
Aluminum Quick-Change Double-Sided Pinion Mount WEHWM205DS Aluminum double-sided pinion mount locates climber-style arc slots on both the right and left sides of the pinion.
Aluminum Quick-Change Pinion Mount With Arc WEHWM211
Aluminum pinion mount features a climber on an arc to maintain track alignment and run the Panhard bar 2-1/2" below the pinion centerline.
Specially angled pinion mount allows mounting Panhard bar at an angle off of the left side. Sold complete with climber hardware.
Aluminum Left Side High Quick-Change Pinion Mount WEHWM181 Rigid, billet aluminum pinion mount mounts to Quick-Change rears and includes a top slot that is 5" left of centerline, while being 2" above at the top and 1" below the centerline at bottom. Quick-adjust climber design allows easy adjustments. Steel Quick-Change Pinion Mount WEHWM219 Manufactured from high-grade steel
Adjustable J-Bars Offered in D.O.M. (Drawn Over Mandrel) steel or light- weight, billet aluminum, J-bars may be adjusted up to 2" without disconnecting from chassis. Part No. Description WEHWM4016-18 Aluminum Adjustable J-Bar, 12" Overall Body Length, 5-1/2" Adjuster, 16"-18" WEHWM4018-20 Aluminum Adjustable J-Bar, 13.5" Overall Body Length, 5-1/2" Adjuster, 18"-20" WEHWM4019-21 Aluminum Adjustable J-Bar, 13.5" Overall Body Length, 6-1/2" Adjuster, 19"-21" WEHWM4020-22 Aluminum Adjustable J-Bar, 15.5" Overall Body Length, 5-1/2" Adjuster, 20"-22" WEHWM4022-24 Aluminum Adjustable J-Bar, 15.5" Overall Body Length, 7-1/2" Adjuster, 22"-24" WEHWM40S18-20 Steel Adjustable J-Bar, 13.5" Overall Body Length, 18"-20" WEHWM40S19-21 Steel Adjustable J-Bar, 13.5" Overall Body Length, 19"-21" WEHWM40S20-22 Steel Adjustable J-Bar, 13.5" Overall Body Length, 20"-22" WEHWM40S22-24 Steel Adjustable J-Bar, 13.5" Overall Body Length, 22"-24"
for maximum rigidity, single-sided pinion mount includes a climber on an arc that provides quick, easy adjustments, while helping keep rear end tracking straight.
759
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker