Axle Tube Lead Clamp WEHWM356 Increase traction by attaching lead to the rear axle utilizing special axle clamp that is tapped 1/2"-13 on 5" and 6" bolt center spacing. Shock Mount Extensions
3/4" Double Adjusters Machined from stainless steel.
WEHWM40AL
Part No.
Description
Short, 2-1/2" Of RH And LH Thread Length, 1/2" Center Hex Length, 5-1/2" Overall Medium, 2-1/2" Of RH And LH Thread Length, 1-1/2" Center Hex Length, 6-1/2" Overall Long, 2-1/2" Of RH And LH Thread Length, 2-1/2" Center Hex Length, 7-1/2" Overall
WEHWM40A
WEHWM40AM
WEHWM40AL
Attaches directly to the existing shock mount on suspension, extending the shock 2". Sold complete with WEHWM148SL shock bolt. Part No. Description WEHWM243 Aluminum WEHWM243S Steel Inner Tie Rod Stud WEHWM325 Special stud replaces the stock inner tie rod, allowing 5/8" Heim ends to be used on both ends of the steering arm. Dual Bearing Spring Slider Spring slider features a linear ball shaft bearing instead of a bushing and a shaft-stabilizing internal piston, providing the smoothest and most stable unit FXUUHQWO\RIIHUHG8SGDWHGZLWKD¿QHWKUHDGHGERG\ IRU¿QHWXQLQJ$YDLODEOHIRUXVHZLWK2'VSULQJV Part No. Description WEHWM251F 5" Dual Bearing Spring Slider, 24" Extended WEHWM251-2F 5" Dual Bearing Spring Slider, 26" Extended Replacement/Accessory Components WEHWM251-3 Standard Length Replacement Shaft WEHWM251-4 2" Longer Replacement Shaft WEHWM251-5 Removable Spring Cup With Clip WEHWM251-6 Spring Cup For Adjuster Nut Side WEHWM251-8 Complete Lock With Bolt And Pin WEHWM251-9 Rebuild Kit, Includes Seal, Piston, Bearing And Snap Ring WEHWM251-15 Stack Spring Adapter For Slider WEHWM252 Adjuster Slider Wrench, Aids Adjustment 5/8" Double Adjusters Alloy steel, 5/8"-18 double adjusters are 4-1/4" long, offered with choice of left or right hand threads. Part No. Description WEHWM245RHF 5/8"-18 LH Male x 5/8"-18 RH Female WEHWM245LHF 5/8"-18 RH Male x 5/8"-18 LH Female 5/8" High-Misalignment Spacers Part No. Description WEHWM625250HM 1/4" Long WEHWM625375HM 3/8" Long WEHWM625500HM 1/2" Long WEHWM625100HM 1" Long WEHWM6251250HM 1-1/4" Long WEHWM625150HM 1-1/2" Long
Adjustable Rack End WEHWM202 Aluminum rack end for standard rack shafts is specially slotted, allowing precise bump steer adjustments. Assembly bolts over the shaft and is secured with a 5/8" bolt. Shock Pins
Pin eases shock absorber changes. Offered in steel or aluminum, pins are sold complete with diaper pin. Part No.
Description
WEHWM48AL WEHWM48SM
Aluminum 2-3/8" Long
Steel 1-7/8" Long
Dirt Late Model Lift Arm New and improved, Dirt Late Model lift arm features durable, billet aluminum two-piece construction. The bottom arm includes a mono ball bearing,
while the top arm has a standard Heim with a
GRXEOHDGMXVWHUWRHDVHDGMXVWPHQW/LIWDUPKDV¿IWKFRLOPRXQWV at varying dimensions from the center of the axle tube. Sold complete with rear end brackets and all hardware. Part No. Description WEHWM315DS Short Lift Arm, 5th Coil Mounts At 29", 31", 33" And 35" WEHWM315DL Long Lift Arm, 5th Coil Mounts At 35", 37", 39" And 41" Lift Bar Strut Support Clamp WEHWM215SC Perform chain adjustments in seconds. Quick Adjust Limit Chain Mount allows quickly changing chain length by simply pulling a pin, moving the chain to the following hole, and then replacing the pin. Part No. Description WEHWM2691250A Aluminum Quick Adjust With Belleville Spring, 1-1/4" WEHWM269150A Aluminum Quick Adjust With Belleville Spring, 1-1/2" WEHWM269150S Steel Quick Adjust Without Belleville Spring, 1-1/2" WEHWM2691750A Aluminum Quick Adjust With Belleville Spring, 1-3/4" WEHWM2691750S Steel Quick Adjust Without Belleville Spring, 1-3/4" WEHWM269RS Replacement Belleville Stack Clamp attaches to the rear end tube, allowing support strut to provide lateral support to the lift bar. Quick Adjust Limit Chain Mount
765
2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker