WIL340-13574
Wide 5 Racing Hub Dynamic Rotor Mount System “Floating” rotor mounts eliminate damag- ing heat-related stresses at the rotor mount tabs and bolt stands. Different thermal expansion rates of iron and aluminum distort rotors, causing uneven pad build- up, excessive rotor wear, and pulsing SDGNQRFNEDFN7KHKLJKVWUHQJWKVWHHO
Pedal Assemblies A non-slip pad is installed on each pedal, and both the pedal and base are coated with a corro- VLRQSURRI¿QLVK$VSKHULFDOSLYRWEHDULQJLQWKH center of the bar, superior balance bar, and clevis ensure proper pushrod alignment. Master cylinders must be purchased separately. Part No. Description Single Pedal/Single Master Or Clutch Cylinder Assemblies WIL340-13574 Reverse Swing Mount Assembly, Reverse Mount M/C, 6.0:1 Ratio, 12.02" Pedal Length WIL340-13833 Floor Mount Assembly, Forward Mount M/C, 6.0:1 Ratio, 9.63" Pedal Length WIL340-13834 Swing Mount Assembly, Forward Mount M/C, 7.0:1 Ratio, 12.1" Pedal Length Single Pedal/Dual Master Cylinder Assemblies WIL340-12509 Reverse Swing Mount Assembly, Reverse Mount M/C, 6.25:1 Ratio, 11.71" Pedal Length WIL340-13831 Floor Mount Assembly, Forward Mount M/C, 6.0:1 Ratio, 9.6" Pedal Length WIL340-13832 Swing Mount Assembly, Forward Mount M/C, 7.0:1 Ratio, 12.11" Pedal Length WIL340-13837 Reverse Swing Mount Assembly, Reverse Mount M/C, 5.0:1 Ratio, 10.02" Pedal Length Dual Pedal/Triple Master Cylinder Assemblies WIL340-11295 Swing Mount Assembly, Forward Mount M/C, 6.25:1 Ratio, 12.05" Pedal Length WIL340-11299 Reverse Swing Mount Assembly, Reverse Mount M/C, 6.25:1 Ratio, 11.89" Pedal Length WIL340-13835 Reverse Swing Mount Assembly, Reverse Mount M/C, 5.0:1 Ratio, 10.02" Pedal Length WIL340-13836 Reverse Swing Mount Assembly, Reverse Mount M/C, 6.25:1 Ratio, 11.89"/10.02" Pedal Lengths Triple Pedal/Triple Master Cylinder Assemblies WIL340-12410 Floor Mount Assembly, Forward Mount M/C, 5.25:1 Ratio, 10.66" Pedal Length WIL340-12411* Floor Mount Assembly, Forward Mount M/C, 5.25:1 Ratio, 10.66", Includes Throttle Link Replacement Components WIL340-1757 Balance Bar Assembly Only * Includes throttle link. XVHD¿[HGWUXQQLRQEHDULQJLQWKHSHGDODUP ZLWKVSKHULFDO+HLPHQGSXVKURGDWWDFKPHQWV WRGHOLYHUSUHFLVHFRQWURORIEUDNHELDVDGMXVW - ment. Assemblies include a large 7/16"-20 bar for TXLFNDGMXVWPHQWVZLWKDVKRXOGHUHGHQGWKDW PD\EHDWWDFKHGWRDVWDQGDUGUHPRWHDGMXVWHUFDEOH Master cylinders must be purchased separately. Part No. Description Single Pedal/Dual Master Cylinder Assemblies WIL340-15076 Swing Mount Brake Pedal, Reverse Mount M/C, 5.1:1 Ratio, 10.14" Pedal Length Tru-Bar Pedal Assemblies 7UX%DUEDODQFHEDUSHGDODVVHPEOLHV
WIL300-8431
mounting plates bolt solidly to the hubs with specialized mount- LQJEROWVDQG³7´QXWV8VHZLWKDQ\HLJKWRQEROWSDWWHUQ rotors with 5/16" bolt holes. Part No. Description WIL300-8431 Rotor Mounting Plate For Machined Wide 5 Hubs, Each WIL230-8454 Rotor Bolt Kit, Rotor To Plate, Lock Wire Drilled With AN Washers, Includes Parts For One Rotor Studs 6WXGVDUHGLDPHWHUDQGZLOOVWDQG up to the most punishing race condi- WLRQV6WXGVKDYHNQXUOGLDPHWHUWR¿W:LOZRRG:LGH KXEV6ROGLQGLYLGXDOO\ Part No. Description WIL230-10989 5/8" Dia., Coarse Thread WIL230-10990 5/8" Dia., Drilled For Wide 5 Hubs Wheel Spacer WIL270-2189C Eliminates the expense of stocking multiple wheel offsets. Provides 2" positive wheel offset for ¿QHWXQLQJRIFKDVVLV7ULDQJXODWHGIRUPD[LPXP strength and rigidity, and 50% lighter than other wheel VSDFHUVDWOEVWRWDOZHLJKW&RDUVHVWXGVDUH included. Drive Flanges
+LJKVWUHQJWKELOOHWDOX - PLQXPÀDQJHVDUHVSOLQHGWR ¿W$OOVWDURUVLPLODUVW\OHD[OHV Part No.
Description 5-Bolt Drive Flanges For Starlite “55” Hubs WIL270-6732
Standard Drive Flange With Bolts, Black Lightweight Drive Flange With Bolts, Silver
WIL270-6733 WIL270-6918
Dust Cap For 5-Bolt
WIL340-15072
Black Anodized, Sealing Boss With O-Ring, With Bolts
WIL270-13213
8-Bolt Drive Flanges For Starlite Hubs WIL230-1378
Mount Bolt Kit, 8-Pack (Drilled For Safety Wire)
Swing Mount Brake Pedal, Reverse Mount M/C, 6.25:1 Ratio, 11.88" Pedal Length Floor Mount Brake Pedal, Forward Mount M/C, 6.0:1 Ratio, 9.6" Pedal Length Swing Mount Brake Pedal, Forward Mount M/C, 7.0:1 Ratio, 12.12" Pedal Length
WIL270-2265 WIL270-2290 WIL270-2290B WIL270-2290R
Dust Cap For 8-Bolt Gold Anodized Flange Black Anodized Flange Red Anodized Flange
WIL340-15077
WIL340-15078
WIL340-15079
WIN5144
Flange Gasket
Dual Pedal/Triple Master Cylinder Assemblies WIL340-15072 Swing Mount Assembly,
Front Hub Caps Part No.
Forward Mount M/C, 6.25:1 Ratio, 12.07" Pedal Length Swing Mount Assembly, Reverse Mount M/C, 5.0:1 Ratio, 10.14" Pedal Length
Description
WIL340-15073
WIL270-9498 Snap-Cap Composite Hubcap, Starlite “55” Hubs WIL270-9498* Starlite “55” Front Dust Cap, Bolt-On * Bolt-on dust cap for Starlite “55” rear hubs, allows use as a front hub. WIL270-6913
WIL340-15074 Swing Mount Assembly, Reverse Mount M/C, 6.25:1 Ratio, 11.88" Pedal Length WIL340-15075 Swing Mount Assembly, Reverse Mount M/C, 6.25/5.1:1 Ratios, 11.88"/10.02" Pedal Lengths
778 2019-20 CIRCLE TRACK PARTS AND ACCESSORIES
Made with FlippingBook flipbook maker