Klass 90° Workstation Direction for Use
It is necessary to be reset manually after the initial installation and power off.
MANUAL RESET
• Keep pressing down key until the desktop until display shows “E-1” and “rES” alternately and release the key. • Keep pressing down key, the desktop will move slowly down and return back until the display shows “063”.
rES
6
rES
• Release the key, the height-adjustable desk can be used normally.
Note: The anti-collision function is not enabled during all resets. Please note that there is a potential risk of pinching in this case, and be sure no obstacles in the desk’s path.
UP AND DOWN
• Keep pressing up key until the required height is reached.
• Keep pressing down key until the required height is reached.
Press and hold the memory key until the columns have reached the desired memory position.
SAVING POSITION
• Adjust the desktop to the height you want to save.
• Press “M” key, until the display will show “S --”
• Press “1”, and the display will show alternately as “S-1” and the desktop height.
• Press “M” key, the first memory position is set successfully. Similar process for 2 and 3 memory positions.
Before use, please make sure removing obstacle in advance and human body is in the safe position.
ANTI-COLLISION FUNCTION
• Once the desktop encounters any obstacle in its path, the screen displays “E-2”.
• The desktop will move a defined distance in opposite direction, and it would be used normally after removing the obstacle.
8
Klass 90° Workstation - Assembly Instructions
Made with FlippingBook - Share PDF online