Klass 90° Workstation Direction for Use
SET MINIMUM AND MAXIMUM HEIGHT
Do not enable this function only when you are really need in some situation.
• Keep pressing the key “M” for 3 seconds until the display shows “S--” to enter setup menu.
• Press up key until the display flash as “HLP”.
1 H-P
• Press “1”, the display show alternately as “H-P” and current height.
• Keep pressing up or down key until the required upper limit position is reached.
• Press “M”, the desktop height will be showed and the shelf stop position has been set. • Press “2”, the display will show alternately “L-P” and current height, keep pressing down key until the lower limit position is reached, press M, the con- tainer stop position has been set.
2
Note: By this function would be used to limit the movement area of desktop, when the container is underneath or any shelf above the desktop. Once it is set, the new upper or lower limitation position will be stored.
CHANGE THE DISPLAY UNIT(cm/inch)
• Keep pressing up key “M” until the display show “S--” to enter the setup menu.
Unt
• Press “up” key, the display will show “Unt”.
• Press “1”, and the display will show alternately as “Unt” and the desktop height unit by “cm”.
1
• Press “M” key to save the unit as cm.
• Press “2”, and the display will show alternately as “Unt” and the desktop height unit by “inch”, press the key “M” to save the unit as inch.
2
AMEND THE DESKTOP HEIGHT DISPLAYED
rES
• Keep pressing down key until the desktop until display shows “E-1” and “rES”.
• Keep pressing key “M” until the display show “Ur” and “OFF” alternatelty.
• Keep “Up” or “Dn” several times, until the display show “End” and height. (In this case, the unit is mm or inch when this system’s metric or imperial) • Press “1”,”2” and “3” respectively, and to adjust the first number, the second num- ber and the third number. If you click one, the number will increase by 1, until you get to the value you want.
1 2
• Press “M” the height has been changed to defined digit.
Note: The function enables you to change the height shows on the display based on the actual measurement.
9
olgoffice.com | myolg.online
Made with FlippingBook - Share PDF online