Exceeding Expectations because Quality and Performance are #1
100 YEARS of combined experience in product management, formulation, laboratory analysis, and analytical testing
Certificates of Analysis can be customized to carry your companies logo and can be expanded to show extended analysis details if desired. These necessary steps insure that every gallon of CAM2 ® product, bulk or packaged, is manufactured on specification and meets the appropriate performance levels. QUALITY ASSURANCE/LAB All facilities manufacturing a CAM2 ® branded product will have a CAM2 ® ASSURE Certified Laboratory with full time on-site CAM2 ® quality management personnel. A CAM2 ® Assure Certified Laboratory meets the following criteria: 1) It is equipped with state-of-the-art testing equipment 2) The lab is staffed with trained professionals 3) The annual inspection and ongoing round-robin testing shows that the correct operating procedures are properly and consistently used and equipment is always correctly calibrated. • Instruments calibrated yearly • Instruments verified daily • Technicians/chemists with documented training
TEST METHOD
ASTM METHOD
Nitrogen Nitrogen
ASTM D4629 ASTM D5762 ASTM D7279 ASTM D7279 ASTM D2270 ASTM D5293 ASTM D2983 ASTM D5800 ASTM D6481 ASTM D4052 ASTM D5949 ASTM D4951
Viscosity @ 100°C Viscosity @ 40°C Viscosity Index
Cold Crank (Viscosity, cP)
Brookfield Viscosity (Viscosity, cP)
NOACK Volatility (Evaporation, % Loss) X-Ray (Elemental Analysis, ppm)
• Routine quality audits conducted • Formal procedures implemented
Specific Gravity
Pour Point
IN PROCESS (BATCH) INSPECTION CAM2 ® manufactured batches undergo a strict routine of analysis. Every product code in the CAM2 ® library has a specifically designed test criteria that may contain a dozen or more inspection points. Specifications are often tighter than industry standards and are highly controlled. Potential inspection points
ICP (Elemental Analysis, ppm) Flash Point (Cleveland Open Cup) Flash Point (Pensky Martens Closed Cup)
ASTM D92 ASTM D93
Color
ASTM D1500 ASTM D7647 ASTM D1401 ASTM D4684 ASTM D5481
Particle Count
Demulsibility (Water Separability) MRV (Yield Stress/ Apparent Viscosity) High Temperature/High Sheer (HTHS) (Meets SAE J300 Specification)
• Kinematic viscosities (40°C/100°C) • Elemental quantities by XRF or ICP • Cold Cranking simulation • Noack evaporation
Karl Fisher
ASTM E203
CAM2 ® International’s Hammond, IN quality laboratory is an ISO 9001 Certified facility for the design & manufacture of petroleum products. Hammond, IN is also an approved manufacturing facility for the blending and packaging of engine oils for the United States military.
59
Made with FlippingBook flipbook maker