15 D
MINI IN-LINE DISPOSABLE DESICCANT DRYER • Ideal for spray guns (point of use) • 40 micron porous bronze element removes fine dirt particles, as oil removing media removes oil vapor and desiccant beads absorb water vapor • Attached directly to spray gun or mini regulator located on spray gun • Operating Temperature Range: 35˚-130˚ F
ELECTRIC TANK DRAINS FOR AIR COMPRESSOR TANKS • Automatically drain water & contamination at set times • Increase tank life, tool life & maximize air volume • Available in 1/4”, 3/8” and 1/2” NPT • Available in 115V and 230V
• Unit is bi-directional with 1/4” NPT • Max. Operating Pressure: 125 psi • Max. Flow Capacity: 15 SCFM
ATD-7820. ..................................... $35.79/2-pack
7930
7815
Model Number
Description (includes protective caps and O-rings)
NPT Voltage Pressure
Price
7823
7824
7841
7843
7844
ATD-7815 ATD-7930
$318.09 $155.09
1/4” Electric Air Compressor Drain with Strainer 1/4” Electric Air Compressor Drain with Strainer
1/4” 115V 200 psi 1/4” 115V 230 psi
GENERAL PURPOSE FILTERS
Pipe Size
Max. Flow SCFM
Bowl Capacity
Operating Temp. Range
Max Flow Pressure
Model Number
Bowl Type
Drain
Price
StageAir DESICCANT DRYING SYSTEMS FIRST STAGE: • First filter - 5 micron water removing filter with 9 oz. bowl, sight glass and overnight drain SECOND STAGE: • Second filter - .01 micron oil removing filter with 9 oz. bowl, sight glass and overnight drain. THIRD STAGE: • Third filter - 2 quart desiccant filter - lowers the dew point to -40˚ F and removes all water in vapor and liquid form. FOURTH AND FIFTH STAGES: • Filtering - 3 micron filter with 9 oz. bowl and sight glass - final filter protects paint job from any possible dirt or desiccant dust or debris. Gauge included with regulator.
ATD-7823 1/4” 48 SCFM 5 oz. ATD-7824 1/4” 48 SCFM 6 oz. ATD-7827 1/2” 100 SCFM 5 oz. ATD-7828 1/2” 100 SCFM 6 oz.
$78.19
Poly w/bowl guard Manual 40˚-125˚ F 150 psig
Manual 40˚-160˚ F 250 psig $150.99
Metal w/sight glass
$78.19 $93.19
Poly w/bowl guard Manual 40˚-125˚ F 150 psig
Metal w/sight glass
Manual 40˚-160˚ F 250 psig
General purpose filters remove harmful water condensate, pipe scale, dirt and rust from your compressed air system. This prevents corrosive damage to compressed air equipment and finished products. Typically, general purpose filters are installed upstream of regulators to prevent valve failure. They are also used as pre-filters to oil removing and coalescing filters to ensure high efficiency and long element life in applications such as paint spraying, instrumentation and phar- maceutical.
REGULATORS
Pipe Size
Max. Flow SCFM
Pressure Gauge
Operating Temp. Range
Adjustment Range
Supply Pressure
Model Number
Gauge Port
Price
ATD-7841 Mini w/Metal Body
$45.39
1/4” 25 SCFM 0-160 psi
1/8” NPT 40˚-120˚ F 5-125 psig 250 psig
ATD-7843 ATD-7844
$79.49 $79.49
1/4” 50 SCFM 0-160 psi (2) 1/4” NPT 40˚-120˚ F 5-125 psig 250 psig 1/2” 100 SCFM 0-160 psi (2) 1/4” NPT 40˚-120˚ F 5-125 psig 250 psig
7763
7887
Pneumatic equipment that operates at higher than recommended pressure can cause excess torque, force and wear. Operating below specified pressure can cause machines to fail to meet their design performance specifications. Therefore, precise air pressure control is essential to efficient operation of air powered equipment. An air line regulator is a specialized control valve which reduces upstream supply pressure level to a specified constant downstream pressure. Features three position non-rising knob - push to lock, pull to adjust, detach to make tamper resistant; regulates air pressure of the air line; self-relieving style units.
7888
AIR CONTROL GAUGE • Adjusts air pressure at the air tool • Ideal for spray guns to avoid costly painting errors such as poor color match, runs, poor coverage, orange peel, etc. • Accurate 0 to 160 psi • Fits most makes and models of spray guns and air tools
7880
7886
FIVE-STAGE DESICCANT AIR DRYING SYSTEM
Inlet/ Outlet
Max. Flow
Outlet Pipe
Desiccant Charge
Number
Description
Price
• Air Inlet: 1/4” NPT(M) • Air Outlet: 1/4” NPT(F)
ATD-7763
$729.89
2 Quart, 5-Stage Desiccant Dryer
1/2” 30 SCFM 1/2”
2 Qt.
PRESSURE GAUGE • 2” face, 1/4” center back mount • 0-160 psi standard
TWO-STAGE DESICCANT AIR DRYING SYSTEM $72.59 The ATD-7763 unit is equipped with a filter, an oil removing filter, a two quart desiccant filter and a filter/regulator. Also includes a shut-off valve and two quarts of desiccant beads. ATD-7888 1 Gallon, 5-Stage Desiccant Dryer 1/2” 30 SCFM 1/2” 1 Gal. $749.95 ATD-78881 Replacement Filter Element Kit for 7888 $61.79 The ATD-7888 unit is equipped with a filter, an oil removing filter, a one gallon desiccant filter and a filter/regulator. Also includes a shut-off valve and one gallon of desiccant beads. ATD-77631 Replacement Filter Element Kit for ATD-7763
ATD-6753. .......................................................$20.09 ATD-7921. .........$16.09
PIGGYBACK FILTER/REGULATOR COMBINATION UNITS ATD-7854 Specifications: • Pipe Size: 1/4” • Pressure Gauge: Included • Gauge: Included • Type: Standard • Bowl Capacity: 6 oz. • Max Pressure: 250 psig • Max Flow SCFM: 50 • Bowl Type: Metal • Filter Element: 40 micron • Drain: Manual ATD-7858 Specifications: • Pipe Size: 1/2” • Pressure Gauge: Included • Gauge: Included • Type: Standard • Bowl Capacity: 6 oz. • Max Pressure: 250 psig • Max Flow SCFM: 100 • Bowl Type: Metal • Filter Element: 40 micron • Drain: Manual ATD-7854. ........................................................... $166.49 ATD-7858. ........................................................... $166.49
Inlet/ Outlet
Max. Flow
Filter Element .01 micron
Number
Description
Bowl Type
Price
1 Quart, 2-Stage Desiccant Dryer with Oil Removing Filter
Metal w/ sight glass
ATD-7880
$407.59
1/2” 250 psi
ATD-7886 ATD-7887
$26.49 $66.69
1 Quart Replacement Desiccant 1 Gallon Replacement Desiccant
7854
7858
Includes: 1 qt. desiccant filter, shut-off valve and 1 qt. desiccant beads
Made with FlippingBook flipbook maker