39 D
5160
54
41840D
3736
6516
3739
7541
232
35140
400E
49700
4030
WINDKO
8562
658
85827
Number
Description
Includes
Price
HEAT GUNS
ATD-3736 ATD-3739
$67.49 $122.39
Dual Temperature Heat Gun Kit
Includes : Dual temperature heat gun; Reduction nozzle; Reflector nozzle; Large deflector nozzle; Small deflector nozzle; Molded plastic storage case
Dual Temperature High Output Heat Gun Temperature Range: 158˚F to 1,112˚F; CFM: 14 Low, 17 High; Voltage: 120V; Wattage: 1,500; Cord: 6 ft. length, 14AWG; cETLus approved
BODY & FENDER TOOLS
ATD-4030 7-Pc. Heavy-Duty Body & Fender Tool Set Includes : Pick Hammer; Body Hammer; Bumping Hammer; Universal Dolly; Spoon Dolly; Heel Dolly; Combination Dolly; Molded Storage/Carrying Case
$81.99
PINSTRIPE REMOVAL
203 – Pinstripe Removal Tool: Specialty tool developed for the removal of pinstripes, adhesives, double faced tapes and moldings with ASTRO’S Smart Eraser® Pads; Tool includes built-in regulator; 4,000 Max. RPM; Spanner wrenches included for easy removal of pad. 400E – Smart Eraser® Pad: 12pc Smart Eraser Pads – 4” pads made of molded rubber with 5/16” arbor; Developed to dramatically reduce time spent on the removal of pinstripes, adhesive and double faced tape; Fast and easy; Molded rubber with 5/16: arbor for use with the; Pad size: 4”; Made in the USA Call for Price Molded rubber with 5/16”” – 24 thread arbor for use with the 533ET or 1208A; Pad size: 4”; For use with Astro model # 533ET or 1208A; USE WITH MAXIMUM RATED 4000RPM TOOL; NOT FOR USE WITH STANDARD NON-GEARED DIE GRINDERS; Made in the USA Call for Price Molded rubber with 5/16”” – 24 thread arbor for use with the 533ET or 1208A; Pad size: 4”; For use with Astro model # 533ET or 1208A; USE WITH MAXIMUM RATED 4000RPM TOOL; NOT FOR USE WITH STANDARD NON-GEARED DIE GRINDERS; Made in the USA Call for Price
ONYX Pinstripe Removal Kit with Onyx 4,000rpm Pinstripe Removal Tool with Safety Lever and 12 Smart Eraser® Pads
AST-232
AST-400E
Smart Eraser
AST-400E6
6 pack Smart Eraser
TRIM TOOLS & UPHOLSTERY REMOVER
Includes: Wide-type Remover ( ATD-85841 ); Pull-type Remover ( ATD-85842 ); Handy Remover ( ATD-85843 ); Narrow-type Remover ( ATD-85844 ); Upholstery Clip Remover ( ATD-85845 ); Angled Clip Panel Remover ( ATD-85846 ); Fork Tip Flat Clip Panel Remover ( ATD-85847 ); Clip Panel Remover ( ATD-85848 ); Sharp Tip Flat Clip Panel Remover ( ATD-85849 ); Panel Remover ( ATD-85850 ); Blunt Tip Flat Clip Panel Remover ( ATD-85851 ) $60.09 Includes: Wide Scraper Tool; General Scraper Tool; Flat Scraper Tool; General Purpose Wide Edge Tool; Thin & Flat Tool; General Purpose Wedge Tool; General Purpose Pry Tool; Thin with Pry Tip Tool; Pry Tool; Concentrated Scraper Tool; Curved Scraper Tool; Tube Scraper Tool; Angle Scraper Tool; Emblem Remove; Rounded Corner Scraper Tool; Box Corner Scraper Tool; Sharp Corner Scraper Tool; Angled Push/Pull Scraper; Flat Push/Pull Scraper; Panel Clip Removal Tool; Large Grommet Pry Tool; Small Grommet Pry Tool; Flat Grommet Remover; Flat Grommet Pry Tool; Flat Sealant Application Spade; Interior Button Removal Tool; Wire Insertion Tool $66.49
ATD-8584
11-Pc. Trim Removal Tool Set
27-Pc. Trim Panel Removal & Scraper Tool Set
ATD-85827
LIS-35140 LIS-35400
Call for Price Call for Price
Pocket Plastic Clip Remover Door Upholstery Remover
Quickly removes plastic fasteners used on weather stripping, radiator shrouds, fender linings, air dams and other plastic or rubber parts
For Plastic Fasteners; Rugged tool with a large comfortable handle
PLIERS & PLIER SETS
KDT-41850 KDT-41840
Call for Price Call for Price Call for Price
3-Pc. Body Clip Plier Set
30° and 80° offset push pin pliers; Panel clip pliers with V design for removal of standard clips without center pins 30° and 80° offset push pin pliers; Specially designed for removal of push pins With center locking pin Removes plastic anchors with center pins without damage to the pin or the anchor with one-handed operation
2-Pc. 30° & 80° Push Pin Plier Set Adjustable Indexing Trim Clip Pliers
MTI-54
DENT PULLERS
Muscle Max 10 lbs. Heavy-Duty Dent Puller Set
ATD-5160
$140.99
Includes: 10 lbs. slide hammer; (2) Pipes; 2-hole pipe; Hex nut; Chain and hook; (5) Plates; Molded storage case; 7/8” x 14 thread pitch for accessories
Heavy-duty dent puller/slide hammer with vinyl cushion finger grip handle; Puller comes with extra screw and hook for pulling bearings and seals; Shaft 1/2” x 20 thread; 1.75 lbs. slide hammer
$38.79
ATD-7541
Heavy-Duty Dent Puller
WINDSHIELD REMOVERS
Call for Price $28.19 $18.39
ONYX Air Windshield Remover with 3pc. Blade Set – Rear Exhaust Deluxe Windshield Removing Tool 6-Pc. Replacement Blades for ATD-6516
20,000 oscillations per minute; Sealant cutter that cuts around bonded and encapsulated glass; Efficiently cleans and smoothes moldings after glass removal; Rear exhaust directs air away from work. Includes: 57mm Bent Blade; 52mm Bent Curved Blade; 35mm Flat-Nose Straight Blade
AST-WINDKO
ATD-6516 ATD-6517
Durable aluminum handle and steel cable pull tool; Cuts caulking compound around windshield fast and easy
Strong, tempered steel blades can be resharpened or replaced
CUT OUT KNIVES
Extra reach to cut hardened urethane down to the dash line; Heavy-duty steel and aluminum construction; Ergonomic cushion grip handle; Use with standard utility razor blade
ATD-8562
$25.09
18” Professional Urethane Cut Out Knife
Made of rigid aluminum that will not flex; Flush securing screws prevent dash and molding damage; Long range provides cutting leverage and distance needed in today’s long dash windshields; Vinyl non-slip grip; Use with utility knife blade $17.59
ATD-8563
24” Urethane Cut Out Knife
SLIDE HAMMERS
Includes: 5 lbs. heavy-duty slide hammer; 8-function internal or external 3-jaw puller - Range: 1-1/4” to 3-1/8”; Internal or external 2-jaw puller - Range: 1-1/4” to 3-1/8”; Puller hook, rear axle puller; Dent puller; Special grip wrench adapter; 5/8” - 18 threaded end; Molded storage case included
ATD-3045
$150.49
Slide Hammer Puller Set
Slide hammer and accessories can be used in many applications; Capable of inside spreads from 3/8” to 1-1/4 and outer spreads up to 3”; Puller reaches depths up to 2-1/2”; All components are in a blow-molded case for easy storage and organization Call for Price
15-Pc. Light Duty Slide Hammer and Puller Set
MTI-49700
AST-658
Call for Price
Stubby Air Slide Hammer
BPM: 1200; Recommended Running Pressure : 90psi; Average Airconsumption : 3.0 CFM; Spindle : 5/8” X 18”; Extension Rod : 5/8” X 18”
Made with FlippingBook flipbook maker