PREVENTIVE MAINTENANCE INSTRUCTIONS Mountz FG Torque Screwdrivers (FG ENANCE INSTRUCTIONS Mountz FG Torque Screwdrivers (FG-8i - 125i)
_____________________________________________________________________________________
Inspect Cam, Balls, and Spring
x
x
x
At each service interval, you should:
1. Clean and re-grease the tool. 2. Inspect the following for any signs of wear: ➢ Cam (P/N 021-000003 grease the tool.
➢ 1/2" Diameter Steel Ball (P/N 983 ➢ 7/32" Diameter Steel Ball (P/N 983 ➢ Spring 000003-10) 1/2" Diameter Steel Ball (P/N 983-000006) 7/32" Diameter Steel Ball (P/N 983-000005)
■ FG-8i (P/N 983 ■ FG-20i (P/N 983 ■ FG-40i (P/N 983 ■ FG-125i (P/N 983
8i (P/N 983-000001) 20i (P/N 983-000002) 40i (P/N 983-000003) 125i (P/N 983-000004)
Labels
Model
Blue Label
Red Label
Green Label
Gold Label 076536
076521
076526
076531
FG-8i
076522
076527
076532
076537
FG-20i
076523
076528
076533
076538
FG-40i
076524
076529
076534
076539
FG-125i
Preliminary Steps 1. Collect Calibration Data (If Required): If “As Found” torque calibration data is needed, perform the measurement before starting any disassembly.
Product Hand Tools
Model
Document Number 3WI-8.5-093 Revision Date
FG Preset Screwdriver
Author
Revision
James Bassett
1-A
4.3.2025
For reference only if printed
Page 3 / 11
Made with FlippingBook Annual report maker