PREVENTIVE MAINTENANCE INSTRUCTIONS Mountz FG Torque Screwdrivers (FG ENANCE INSTRUCTIONS Mountz FG Torque Screwdrivers (FG-8i - 125i)
_____________________________________________________________________________________
2.4
Align the adjustment screw with the end of the spring cartridge and turn it clockwise (CW) until it is fully seated and flush with the cartridge surface.
2.5
Apply 3-in-1 oil to the needle bearing. 1 oil to the needle bearing.
Carefully align the bearing teeth with the corresponding notches on the washer before installation.
Product Hand Tools
Model
Document Number 3WI-8.5-093 Revision Date
FG Preset Screwdriver
Author
Revision
James Bassett
1-A
4.3.2025
For reference only if printed
Page 8 / 11
Made with FlippingBook Annual report maker