Device Description The induction generator and the induction coil are designed for continuous operation. All shrink accessories have a fixed location on the machine that are easily within reach so that orderliness and ease of operation are of high importance in regular operation. The logical positioning of auxiliary appliances on the machine and an intelligent software control make it very easy for new operators to quickly become familiar with switching over of shrink chucks and/or different tool diameters. The inductor has been designed in connection with the generator so that carbide tools with shanks diameters of 3 to 32mm (1/8" to 1-1/4") and HSS tools of diameter 6 to 32mm (1/4" to 1-1/4") can be fitted easily and without issue. To operate, the chuck that is to be shrunk is placed in the toolholder. Larger tools such as CV50 and HSK100 mount directly whereas smaller tapers such as CV40 and HSK63 make use of reducing- adapters. The inductor housing, once fitted with select screening ring, is then placed over the chuck. On the operating panel, “Arrow” keys navigate the menus to select the size of tool or the chuck diameter and the different instep shafts (DIN-chuck, 4.5° of standard measure chuck and/or 3° of super slender chucks) which are to be shrunk according to the required energy supply and heating time. After pressing the "Start" button, the chuck is quickly heated and the tool is then inserted into the expanded chuck. The heating times are between 3 and 9 seconds, dependent on the corresponding energy supply required for different sized tools. The procedure is identical for when removing of tools. Induktherm rapid shrink II VC Performance 10kw Measurements (MM) B 680 x T 520 x H1600 Weight 88 kg Power supply 600 volt max. chuck length 400mm Carbide-Shafts Ø 3-32mm / 1/8" - 1-1/4" HSS-Shafts Ø 6-32mm / 1/4" - 1-1/4"

Optional Reducing Adapter

Adapter for Order No. HSK-A80 990-356 HSK-63 990-354 HSK-A/E50 990-353 HSK-A/E40 990-352 HSK-A/E32 990-351 HSK-E25 990-350 CAT40/BT40 990-354 CAT30/BT30 990-355 PSC63 990-354

Screening rings

No. Diameter Size Order No. 1 Ø3 - Ø5 1/8 - 3/16 990 - 605 2 Ø6 - Ø12 1/4 - 1/2 990 - 612 3 Ø14 - Ø16 9/16 - 5/8 990 - 616 4 Ø18 - Ø20 3/4 990 - 620 5 Ø25 - Ø32 1 - 1-1/4 990 - 632

Available From:

Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted.

Page 1 Page 2

Made with FlippingBook - Online magazine maker