HORIZONTAL LIFELINE SYSTEM INSTRUCTION MANUAL
8.0 LABELING 8.1 The following labels must be present and fully legible:
HANDLE FOR TENSION
T
PRODUCTREF.NO.
: BPN 4001
LENGTH
: XXXX
BATCHNO. : XXXXX MONTH&YROFMFR. : MM/YYYY
TEMPORARYHORIZONTAL LIFELINE
TEMPORARYHORIZONTAL LIFELINE REF.BPN 4001
INSTRUCTIONS TOUSE: Anchorages strength requirement 5000 lbs(22kN).Only use full body harnesswith this devicewhichwill limit free fall to amaximum of 6 feet when using shock absorbing lanyard and located overheadwhen using self retracting lifelines.Any kind of contactwith sharp edges should be avoided.Should always be used by trained / authorised persons only. Always ensure connection to anchorage is secured properly before use.Always ensure that the lifeline is correctly tensioned for optimal performance, (see usermanual formore details).
INSTRUCTIONS FOR INSPECTION: The device should be inspected before each use in accordancewith usermanual including locking function (pull strongly to test),condition of lifelines, functions and condition of connectors,housing and fasteners, legibility of labels and any evidence of defects,damage andmissing parts. Inspection by a competent person required at least annually, see usermanual.Always inspect impact indicator at the karabiner end of the lifeline.A ruptured section is an indication that an impact has occurred and the unitmust be removed from service for repair. If used to arrest a fall, remove from service for repair.Do not use if inspection reveals an unsafe condition.Strictly not user repairable.
WARNING: It is important to read and understand themanufacturer’s instructions prior to use.All the instructions suppliedwith this product at time of shipmentmust be adhered to for proper use,maintenance and inspection.Any kind of alteration or misuse of this product,or failure to follow instructionsmay result in serious inury orworst,death.Alwaysmake only compatible connections.Always exercise caution using this equipment near hazardous thernal,electrical or chemical sources.This product should not be used as a personal energy absorber. Always ensure that the labels are not removed.
9.0 INSPECTION & MAINTENANCE
EQUIPMENT RECORD
Product: Model & Type/Identification
Trade Name
Identification Number
Manufacturer
Address
Tel & Fax Email & Website
Year of manufacture/life expiry date
Purchase date
Date first put into use
Other relevant information (e.g. document number)
PERIODIC EXAMINATION AND REPAIR HISTORY
Defects noted, repairs carried out and other relevant information
Reason for entry (periodic examination or repair)
Name and signature of competent person
Periodic examination next due date
Date
Please refer to the Product Data Sheet for product features and specifications.
Manufactured by Bunzl Brands & Operations 55 Sarah Andrews Close Erskine Park NSW 2759 Locked Bag 5001, St Clair NSW 2759 National Sales: 1300 783 606 bsafe.com.au
275-032019
Made with FlippingBook flipbook maker