9BCPD24/9BCPD36-TFH BUBBLE TUBE PODIUM INSTRUCTIONS 2017
The following are the instructions for installing a TFH Bubble or Hurricane Tube inside the podium.
Secure Bubble/Hurricane Tube Base to Wood Slats
1. Remove both sides of the trap door 2. Remove white plastic cover of Bubble/Hurricane Tube Base. 3. Set the Bubble/Hurricane Tube Base on the interior wooden slats. 4. Place the Bubble/Hurricane Tube in place and loosely screw in bolts but do not install tube just yet. 5. Replace the Trap Door pieces. This will center the Bubble/Hurricane Tube and Base on the interior wooden slats. 6. Carefully, without moving the Tube/Base, remove the Trap Door pieces and mark on the base where pilot holes will be drilled. 7. Remove Bubble/Hurricane Tube and drill pilot holes through to the wooden slats. 8. Secure the Base to the slats with four 2 ” wood screws.
Attach Bubble/Hurricane Tube to Base
9. Place the Bubble/Hurricane Tube to the base. Hand tighten the bolts without overtightening them. 10. Attach the rubber hose from the pump (Bubble Tube only) to the nozzle on the bottom of the tube. 11. Plug in the power cord to the back of the Base and feed through mouse hole in the back of the Podium. 12. Push Podium against wall if that is where it is being positioned. We recommend that Podiums be installed against a wall for security and stability of the unit. 13. Hurricane Tube – place foam beads in tube and secure white top cap BEFORE turning on. 14. Plug in and make sure you hear the Bubble/Hurricane Tube pump or fan and that the lights come on. ( Don ’ t look directly into the LED lights ).
Attach Accessories
15. If you have an Interactive Bubble/Hurricane Tube you can insert the cord of the 4-Button Color Controller through the controller access holes in the front of the Podium and connect to the jack in the front of the Bubble/Hurricane Tube Base. 16. If you have a Switch, you can insert the plug through the second hole in the front of the Podium and connect to the jack on the front of the Bubble/Hurricane Tube Base. 17. Adjust the speed setting of the pump/fan.
Completing Installation
18. Set the Trap Door (both pieces) in place making sure that the finger hole piece is in the front. This way you will have easy access to the controls.
800-467-6222
TFH USA LTD.
www.specialneedstoys.com
ALL TFH PRODUCTS SHOULD BE USED WITH ADULT SUPERVISION
Made with FlippingBook - professional solution for displaying marketing and sales documents online