2-STAGE EJECTORS Component Information – Bottom Last
Center Rod – CR
L1
L2
L21 Wrench Flats
L3
C1 x 45°
D1
D17
D2
ASSEMBLY ITEM NUMBER
CENTER ROD DIA
COMPONENT ITEM NUMBER
D1 DIA
D2 DIA
D17 DIA
L1* LENGTH
L3 LENGTH
L21 FLATS
C1 CHAMFER
L2 THICK
34.0 –0.01
20.0 –0.01 .787 –.0004 26.0 –0.01 1.024 –.0004
6.0 .24 6.0 .24 8.0 .31
280.0 11.02 314.0 12.36 354.0 13.94
10.0 +0.02 .394 +.001 12.0 +0.02 .472 +.001 14.0 +0.02 .551 +.001
93.66 3.687
16.0
1.0 .04 1.0 .04 1.5 .06
mm
TSBL20
20mm (Small)
TSBL20CR
1.339 –.0004
.63
in
44.0 –0.01
105.67
20.0
mm
TSBL26
26mm (Medium)
TSBL26CR
1.732 –.0004
4.160
.79
in
58.0 –0.01
32.0 –0.01
118.80
27.0 1.06
mm
TSBL32
32mm (Large)
TSBL32CR
2.283 –.0004
1.260 –.0004
4.677
in
*Cutoff on small diameter end only per installation data.
Travel Sleeve – TS
L10
D8
D9 T1
ASSEMBLY ITEM NUMBER
COMPONENT ITEM NUMBER
D8 DIA
D9 DIA 34.0 1.34 43.0 1.69 54.0 2.13
L10* LENGTH
T1 THREAD M43.2 x 1.25 M54.2 x 1.25 M68.25 x 1.5
CENTER ROD DIA
43.00 –0.03 1.693 –0.001 54.00 –0.03 2.126 –0.001 68.00 –0.03 2.677 –0.001
86.0 3.39 94.0 3.70
mm
TSBL20
20mm (Small)
TSBL20TS
in
mm
TSBL26
26mm (Medium)
TSBL26TS
in
105.0
mm
TSBL32
32mm (Large)
TSBL32TS
4.13
in
*Supplied to provide maximum travel with no cutoff. To reduce travel in Stroke 2 (H2), cut threaded end per installation data.
NOTE: All dimensions shown for components are intended for drawing layout purposes only and in some cases have been rounded off. Also, where the same diameter dimension is shown for parts that fit together, the tolerances create the appropriate clearance or fit.
135
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online