SLIDE ACTION COMPONENTS Mini-Might ® Slide Retainers
Pocket Dimensions for Mini-Might ® Slide Retainers – PSR SLIDE ACTION COMPONENTS Mini-Might ® Slide Retainers Typical Application
Typical Application
ANGLE PIN INSERT* ANGLE PIN* (HORN PIN)
X
.38 RAD
HEEL BLOCK SLIDE
All items in stock.
HOW TO ORDER: Use Item Numbers in charts for ordering.
±.005
Y = X +.010 TO +.020 STOP BLOCK WEAR PLATE* RETAINING KEY*
N
RETAINING KEY WEAR PLATE
Ø M
WEAR PLATE
MINI-MIGHT ASSEMBLY*
+.005 –.000
+.005 –.000
.472
.500 THICK WEAR PLATE
Z
.674
*AVAILABLE FROM DME
.020 R MAX
.250 THICK WEAR PLATE
#10-24 TAP x .50 DEEP (FOR FLAT HEAD SCREW)
MOLD CLOSED
+.002 –.000
+.005 –.000
X = SLIDE TRAVEL CAUSED BY ANGLE PIN Z = V-GROOVE LOCATION IN SLIDE FROM CENTERLINE OF SLIDE RETAINER X = Z Y = STOP BLOCK LOCATION
Ø L
Ø K
NOTE: .500 thick wear plate can also be used to key and retain Mini-Might slide retainer instead of retaining key. Mold maker to machine to suit. NOTE: Use .028 thick spacer under retaining key when mold has been machined for .500 thick wear plate. Mold maker to machine to suit.
MOLD OPEN
ITEM NUMBER
N DIM
NOTES: 1. Lubricate all metal-to-metal contact areas before first use and every 100,000 cycles (or more frequently as required). Use a good grade of moldmakers’ non-melting type grease rated for the operating temperature to be encountered. 2. Replace compression spring every 1,000,000 cycles or as required. 3. Do not operate at temperatures exceeding 250°F.
ØK
ØL
ØM
PSR1000
.625
.869
.94
.670
PSR2000
.750
.987
1.06
.715
PSR4000
.875
1.105
1.19
.763
U.S. 800-626-6653 ■ Canada 800-387-6600 ww.dme.net ■
store.dme.net
14
15
Made with FlippingBook - professional solution for displaying marketing and sales documents online