INTERNAL LATCH LOCK Set-Up Dimensional Information
DME AX-Series stripper plate mold base is
DME AX-Series stripper plate mold base is shown
BCP
C
B Plate
X-1 Stripper Plate
A Plate
TCP
Support Plate
4 mm (.157") Minimum
Positive Stop
T rTavel for Latch Body
Z
L8
2nd parting line opening occurs when latch releases Top end ofcenterpulerpin
W
Y
1st parting l opening for built-in trav
T rTavel for X-1 Stripper Plate
IMPORTANT SET-UP DIMENSIONS (Refer to Drawing Above)
L8 BODY FOR CAM FINGERS LENGTH DIMENSION
W (2) CENTER PULLER PIN SET-UP DIMENSIONS
Y (3) MOUNTING PLATE THICKNESS RANGE
Z (4) C’BORE DEPTH IN MOUNTING PLATE
“T” (1) TRAVEL RANGE
BASIC LATCH SIZE
INTERNAL LATCH LOCK ASSEMBLY ITEM NUMBER
MINIMUM MAXIMUM mm in mm in
mm
in
mm
in
mm
in
mm
in
DKL2811
5
.197 30 1.181
22 to 35
.866 to 1.378
28mm DIA (Small)
+.0016 -.0000 .3937
+0.04 -0 10
DKL2812 DKL2821
23 ±0.1
40
1.575
.906 ±.004
30 1.181 55 2.165
DKL2822
DKL3411
6
.236 41 1.614
27 to 47.6
1.063 to 1.875
34mm DIA (Medium)
+.0016 -.0000 .4724
+0.04 -0 12
DKL3412 DKL3421
32 ±0.1
51
2.008
1.260 ±.004
41 1.614 76 2.992
DKL3422
DKL4511
12
.472 58 2.283
35 to 60
1.375 to 2.375
45mm DIA (Large)
+.0016 -.0000 .6299
+0.04 -0 16
DKL4512 DKL4521
43 ±0.1
68
2.677
1.693 ±.004
58 2.283 104 4.094
DKL4522
DKL6011
15
.590 80 3.149
46 to 86
1.811 to 3.385
60mm DIA (Extra)
+.0016 -.0000 .7874
+0.04 -0 20
DKL6012 DKL6021
58 ±0.1
92
3.622
2.283 ±.004
80 3.149 130 5.118
DKL6022
(1) Supplied to provide maximum travel with no cut off. To reduce travel between maximum and minimum, cut off slotted travel limiting sleeve on threaded end only per installation data. Cut off to no less than minimum travel; maintain close tolerances per installation data. (2) This set-up dimension is critical and must be maintained as specified to properly locate pin and cam body to latch. Dimension W is from top of X-1 stripper plate to top end of center puller pin. See installation data for additional information. (3) “Y” mounting plate dimension will be the “A” plate for AX-Series stripper plate mold bases. (4) This counterbore depth is critical and must be maintained as specied to locate split sleeve, cam body, and pin to latch.
145
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online