ACCELERATED KNOCK-OUTS Accelerated Knock-Outs – Typical Application
ACCELERATED KNOCK-OUTS
DRILLED & C’BORED FOR 1/4 S.H.C.S. (4)
3/8 DIA DOWEL
1/2
1 23 / 32 1 7 /
21/32
32
1/4
1/2
5/8
1 1 / 8
7/8
1 1 / 8
1 1 / 2
2 1 / 8
1 1 / 8
5/8
17/32 23/32
TYPICAL APPLICATIONS The DME Accelerated Knock-Outs are simple in design, using a pivot-type motion for accelerated ejection. Mechanical advantage is 1:1. They will accommodate ejector pins up to 3/8” in diameter. (Pins with head diameters greater than 5/8” can be ground down to fit.) Simplicity of design permits DME Accelerated Knock- Outs either to be inserted into the ejector plate (as shown below) or top-mounted, depending on space available for the ejection movement.
1 1 / 8
ITEM NUMBER AKO1
20°
1/2
A
A
Typical Applications
VIEW C-C
B
NOTE: KEY EJECTOR PIN AND LIMIT POSSIBLE OVER TRAVEL OF PIN AS REQUIRED
CUSTOMER TO SUPPLY
7/8 7/8
C
C
SECTION B-B APPLICATION 2
SECTION B-B APPLICATION 1
SECTION A-A
B
153
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online