FasTie ® Quick Ejector Tie-In System Installation Examples
SpeedBar U.S. Patent No. 6,315,544
Specifications Maximum operating temp..............................................300°F (149°C) Air pressure range...............................................................80–100 psi Pull stud material.....................................Hardened Steel (58–62 Rc) Knockout bar and coupler material..................High Strength Steel Threaded studs.............................................B7 Alloy or Comparable Air manifold material............................................................Aluminum Air tubing material............................................................. 1 ⁄ 8 ”OD Nylon Press Requirements
Fixed Length Ejector Bar
COUPLER SIZE
1-inch 1- 3 ⁄
8 -inch 2-inch
3-inch
Ø1.063” Ø1.45” Ø3.063" Ø27 mm Ø36.8 mm Ø52.4 mm Ø77.8mm Ø2.063” Ø0.512” Ø0.641” Ø1.015" Ø14 mm Ø16.5 mm Ø19.4 mm Ø25.8mm Ø0.765”
Platen thru hole min.
Center Ejector Bar
Ejector plate thru hole min. Ejector force per cou- pler max.
2.5 tons
5.5 tons
7.5 tons
15 tons
Recommended FasTie Size Per Press Size & Knockout Qty
Center Adapter
KNOCKOUT QUANTITY
Press Tonnage
1 (Center)
2
4
0–250
1”HS
1”HS
1”HS
250–500 500–750 750–1000
1- 3 ⁄
8 ”
1”HS or 1- 3 ⁄
8 ” 1”HS or 1- 3 ⁄
8 ”
2” 2”
1- 3 ⁄ 1- 3 ⁄
8 ” or 2” 8 ” or 2”
1- 1-
3 ⁄ 3 ⁄
8 ” or 2” 8 ” or 2”
Air Manifold
1000+
Do not use
2”or 3"
2” or 3"
For best results, use the largest FasTie that will fit into the press.
Accessories Additional parts to aid installation and use: • Finished Bar Fixed Length Knockout is a secure extension for a FasTie Pull Stud attached to the ejector plate in a Typical Application. Finished Bars are ordered to your specific length and thread size for seamless installation. • Blank Bar Fixed Length Knockout provides an air passage for FasTie Coupler operation at the back of the press ejector plate in Captive Applications. Several lengths are stocked with one blank end for finishing (cut to length and thread). • SPEEDBAR Adjustable Length Knockout Bar* changes length without tools ± 1 ⁄2” in increments of .006”. Air passes through the bar for air hook-up at the back of the press ejector plate, in Captive Applications.
• Center Knockout Bar and Center Adapter Provides an air passage in front of the press ejector plate for center knockout or alternate applications. Also for use with multiple knockouts. • Air Manifold Splits single air supply into four circuits for simultaneous release of multiple FasTie Couplers. 1/8" diameter tubing and pneumatic connectors are included.
Contact DME for special thread sizes for Ejector Bars and Center Adapters
* 1-inch, 1 ⁄2-13 threaded only
173
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online