FasTie ® Quick Ejector Tie-In System - 1-inch Couplers and Pull Studs
FasTie Pull Stud in Locked Position
FasTie Coupler Design employs three locking lugs, to dramatically increase the load-bearing surface area of the components.
High Strength 1 ” FasTie
Contact Area
Locking Lugs (3)
High Strength FasTie Couplers and Pull Studs
Threads per Model Number
79 3.10
64 2.5
53 2.10
42 1.65
26.3 1.03
HS
13 .50
HS
5 / 8 -11 Internal Thread (Ref) Threads per Model Number
¾” HEX
27 1.062
High Strength Coupler
High Strength Pull Stud
ITEM NUMBER
THREAD SIZE
ITEM NUMBER THREAD SIZE FTFHS50 ½-13 FTFHS63X 5 ⁄ 8 -11(F) FTFHS63 5 ⁄ 8 -11 FTFHSM12 M12 × 1.75 FTFHSM16 M16 × 2 FTFHSM20 M20 x 2.5
3 ⁄
8 -16
FTMHS38 FTMHS50 FTMHS63
½-13
5 ⁄
8 -11
FTMHSM12 FTMHSM16 FTMHSM20
M12 × 1.75
M16 × 2
M20 × 2.5
NOTE: Do not use HS FasTie Couplers in combination with standard version (above). Damage to couplers will result. Maximum installed center line misalignment of coupler and pull stud is + /- 3.5mm/0.138"
Finished Bar Fixed Length Knockout (Typical Applications) threaded both ends, cut to length
ITEM NUMBER (Special order x.xxx = length in inches)
END 1 THREAD SIZE
END 2 THREAD SIZE
Pull Stud (shown for position only, not included)
End 1 Threads
End 2 Threads
FTFL-50-50-X.XXX FTFL-50-63-X.XXX
1/2-13 1/2-13 5/8-11
1/2-13 5/8-11
25.4 1.00
FTFL-63-63-X.XXX 5/8-11 FTFL-M16-M16-X.XXX M16 x 2 M16 x 2
7/8" Wrench Flats
Threaded Stud (shown for position only, not included)
Per Model Number
174
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online