FasTie ® Quick Ejector Tie-In System - 1-3/8 & 2-inch Couplers and Pull Studs FasTie 1-3/8-Inch Components
Couplers
Pull Studs
Center Adapters
15.9 .63
7 / 8 –9 Internal Thread (Ref)
1” Hex
30.3 1.19
31.8 1.25
38.1 1.50
12.7 .50
72.8 2.87
25.4 1.00
31.7
Wrench Flats 1.25
35.1 ø1.38
14
ITEM NUMBER THREAD SIZE FTM1.4-50 ½-13 FTM1.4-63 5 ⁄ 8 -11 FTM1.4-75 ¾-10 FTM1.4-M16 M16 × 2 FTM1.4-M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTF1.4-50 ½-13 FTF1.4-63 5 ⁄ 8 -11 FTF1.4-75 ¾-10 FTF1.4-88X 7/8-9(F) FTF1.4-M16 M16 × 2 FTF1.4-M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTCA1.4-75 ¾-10 FTCA1.4-M16 M16 × 2 FTCA1.4-M20 M20 × 2.5
Maximun installed center line misalignment of coupler and pull stud is +/-5mm (0.197")
Finished Bar Fixed Length Knockout (Typical Applications) threaded both ends, cut to length
ITEM NUMBER (Special order x.xxx = length in inches)
END 1 THREAD SIZE
END 2 THREAD SIZE
Pull Stud (shown for position only, not included)
End 1 Threads
End 2 Threads
FTFL-50-50-X.XXX FTFL-50-63-X.XXX
1/2-13 1/2-13 5/8-11
1/2-13 5/8-11
25.4 1.00
7/8" Wrench Flats
FTFL-63-63-X.XXX 5/8-11 FTFL-M16-M16-X.XXX M16 x 2 M16 x 2
Threaded Stud (shown for position only, not included)
Per Model Number
FasTie 2-Inch Components Couplers
Center Adapters
Pull Studs
15.9 .63 Ref.
50.1 2.0
38.1 1.5
51 2.00
98.43 3.875
38.1 1.50
12.7 .50
51 2.00
Threads per Model Number
Threads per Model Number
1– 1 /
8 –12 Thread
1–½” HEX
1– 1 /
Threads per Model Number
8 –12 Internal
Elbow Air Fitting for 1 / 8 ”OD Tubing
1.25” Wrench flats
Thread (Ref)
ITEM NUMBER THREAD SIZE FTF2-63 5 ⁄ 8 -11 FTF2-75 ¾-10 FTF2-113X 1-1/8-12 (F) FTF2-M16 M16 × 2 FTF2-M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTM2-63 5 ⁄ 8 -11 FTM2-75 ¾-10 FTM2M16 M16 × 2 FTM2M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTCA2-75 ¾-10 FTCA2M16 M16 × 2 FTCA2M20 M20 × 2.5
Maximum installed center line misalignment of coupler and pull stud is + /- 6mm/0.236"
ITEM NUMBER (Spl order x.xxx = length in inches)
END 1 THRD SIZE
END 2 THD SIZE
Finished Bar Fixed Length Knockout (Typical Applications) threaded both ends, cut to length
FTFL2-63-63-X.XXX FTFL2-63-75-X.XXX FTFL2-75-75-X.XXX
5/8-11 5/8-11 3/4-10
5/8-11 3/4-10 3/4-10
Pull Stud (shown for position only, not included)
End 1 Threads
End 2 Threads
25.4 1.00
FTFL2-M16-M16-X.XXX FTFL2-M16-M20-X.XXX FTFL2-M16-M20-X.XXX
M16 x 2
M16 x 2
M16 x 20 M20 x 2.5 M20 x 2.5 M20 x 2.5
7/8" Wrench Flats
Threaded Stud (shown for position only, not included)
Per Model Number
Ejector Bars for 1- 3 ⁄8-inch and 2-inch FasTie’s are special orders. Contact DME Industrial Supplies for information.
176
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online