LIMIT SWITCHES Global Thinswitch ® Limit Switch 55 45 ±0.1 2.9
3.9
28.5
RATED CURRENT (RESISTIVE) VS. OPERATING STEEL TEMPERATURE TSW2222
53.5
AMPS
°F 86
°C 30 50 68 80
100
(2x) SCREW M3x6 OR USE CLIP
90 80 70
122
154.4
0.8mm SPACER
3.2 - 4mm ACTUATION HEIGHT
176
ADJUSTING SCREW
NOT INTENDED FOR INDUCTIVE LOADS
CABLE (~2m)
• A limit switch specially designed for use in injection molds with 3mm and 4mm rest buttons to verify that the ejector plate assembly is fully returned before allowing a mold to close after part ejection • Switch mounting is accomplished using integral mounting holes, or by using a special bracket (included) that allows the switch to slide into place from the edge of the mold base without disassembling the mold • A polyurethane dome and wire seal protect the internal switch mechanism from water or oil contamination, providing a longer switch life • Reliability for over 14 million cycles without failure • Prevents expensive mold repair and maximizes uptime • Suitable for use in environments up to 80ºC • SPST Switching action, with gold-plated internal contacts for reliable operation • Comes with wire leads (28 gauge stranded) and 2-conductor shielded cables, 2m long 65 82 6 13.5 ~42 10.5 Ø3.2
EU STANDARD NA STANDARD
55
2.9
3.9
45 ±0.1
28.5
53.5
55
2.9
3.9
(2x) SCREW M3x6 OR USE CLIP
45 ±0.1
0.8mm SPACER
3.2 - 4mm ACTUATION HEIGHT
28.5
ADJUSTING SCREW
CABLE (~2m)
53.5
TSW2222 SPECIFICATIONS
(2x) SCREW M3x6 OR USE CLIP
24VDC
ELECTRICAL:
0.8mm SPACER
3.2 - 4mm ACTUATION HEIGHT
OPERATING TEMPERATURE: TSW2222 STANDARD MODEL CABLE (~2m)
ADJUSTING SCREW
176°F MAX (80°C MAX)
SPST
SWITCHING:
MATERIALS
FIBERGLASS-REINFORCED NYLON
BODY: DOME:
POLYURETHANE POLYESTER FILM
BACK COVER: WIRE LEADS:
28 GA STRANDED, 2-CONDUCTOR, SHIELDED CABLE, 6 FT. (2M) LONG
82
NORMALLY OPEN (BLACK)
COMMON (WHITE)
10.5
SCHEMATIC DIAGRAM
13.5
Ø3.2
6
65
Installation instructions for bracket
82
Clip
10.5
13.5
Ø3.2
NA STANDARD
EU STANDARD
6
~42
65
~42
DRILL AND TAP M3x5.8mm DEEP (2 PLACES)
3
3.5 0/-0.5 4
SB2
R18
4.5 0/-0.5
65 ±0.1
NOTE: Dimensions are in millimeters (mm).
183
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online