MOLD INTERLOCKS Parting Line Interlocks
• For accurate alignment between mold halves • All machining can be done from the parting line … saving set-up time and machining costs • Components can be purchased individually
Typical Application The male interlock is typically installed in the ejector half of the mold. Left- and right-hand gibs are typically installed in the stationary half of the mold. Mold machining and installation data are available. Contact DME.
Left-Hand Gib
Right-Hand Gib
Center Male Interlock
Center Male Interlock – PLL
+.000 -.010
+.0000 -.0004
C
A
N
F (2)
.03 x 45° TYP
E
G RAD (2)
.02 RAD MAX
H
CENTER MALE INTERLOCK
+.000 -.005
J
B
K DIA DRILL THRU L DIA C’BORE – M DEEP (2) HOLES
M REF
Material: S7 Steel, 52-58 HRC, Titanium Nitrided 80-85 HRC for wear and lubricity
ITEM NUMBER PLL1001 PLL1002 PLL1003 PLL1004
A WIDTH
B LENGTH
C
E
F
G
H
J
K
L
M
N
.4998 .9998
1.000 1.500 2.000 2.500
.85
.030 .060 .060 .060
.250 .500 .750
.19 .25 .38 .50
.250 .312 .438 .562
.500 .875
.219 .281 .406 .531
.344 .406 .594 .781
.22 .28 .41 .53
.36 .61 .73 .86
1.35 1.72 2.10
1.4998 1.9998
1.125 1.375
1.000
See next page for right- and left-hand gibs for parting line interlocks.
197
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online