MOLD INTERLOCKS Parting Line Interlocks
NOTES: 1. Select center, right and left interlock components that are the same length (size) to make one set (e.g., PLL- 1002, PLL-2002 and PLL-3002). 2. Four sets of interlocks should be used in each application. They must be installed on the center line of each side of the mold.
3. Each component includes two socket head cap screws.
Gibs (left and right) – PLL
+.000 -.005
+.0000 -.0004
C
A
.03 x 45° TYP
L (2)
E RAD
H DIA DRILL THRU J DIA C’BORE – K DEEP (2) HOLES EACH GIB
F
+.000 -.005
B G
NOTE: Left- and right-hand gibs are dimensionally identical.
K REF
LEFT-HAND GIB INTERLOCK
RIGHT-HAND GIB INTERLOCK
SIDE VIEW OF GIBS
Material: H-13 steel, 40-45 HRC, melanite coated for wear and lubricity
ITEM NUMBER
LEFT-HAND GIBS
RIGHT-HAND GIBS
A WIDTH
B LENGTH
C
E
F
G
H
J
K
L
PLL3001 PLL3002 PLL3003 PLL3004
PLL2001 PLL2002 PLL2003 PLL2004
.5000 .7500
1.000 1.500 2.000 2.500
.500 .750
.19 .25 .38 .50
.250 .312 .438 .562
.500 .875
.219 .281 .406 .531
.344 .406 .594 .781
.22 .28 .41 .53
.250 .375 .500 .625
1.0000 1.2500
1.000 1.250
1.125 1.375
See previous page for center male parting line interlock.
198
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online