CAVITY AND CORE COMPONENTS Cashew Gate Inserts
CONTOURABLE MIDIFLOW® GMK SERIES For bottom (submarine) gating of medium components. Supports contouring to a depth of 8mm. Suitable for gate diameters up to 1.8mm, shot weights up to 200g per insert and all common plas- tics, including reinforced type. • Permits gating immediately behind projecting ribs • Gate may be remote from molding wall • The spherical geometry in the gate area permits gating on inclined or curved surfaces
Material: 1.4028-X20Cr13 Stainless Steel Hardness 50 +5HRC
ITEM NUMBER GMK1
ITEM NUMBER GMK2
ITEM NUMBER GMK3
Gating point may be located up to 5mm above or below the parting line
Gating point may be located up to 8mm above or below the parting line
Gating point may be located up to 8mm above the parting line
The spherical geometry in the gate area permits gating on incline or curved surfaces.
Additional Information: Page 9 - Viscosity table Page 10- Installation dimensions
Installation Examples
BELOW PARTING LINE
ABOVE PARTING LINE
GMK1
GMK2
GMK3
257
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online