CAVITY AND CORE COMPONENTS Tunnel Gate Inserts CONTOURABLE MAXIFLOW® GXK SERIES For bottom (submarine) gating of medium to large components. Supports contouring to a depth of 10 mm. Suitable for gate diameters up to 3.5mm, shot weights up to 1200g per insert and all common plastics, including reinforced type.
• Permits gating immediately behind projecting ribs • Gate may be remote from molding wall • The spherical geometry in the gate area permits gating on inclined or curved surfaces
Material: 1.4028-X20Cr13 Stainless Steel Hardness 50 +5HRC
The spherical geometry in the gate area permits gating on incline or curved surfaces.
ITEM NUMBER GXK2
ITEM NUMBER GXK1 Gating point may be located up to 10mm above the parting line
ITEM NUMBER GXK3 Gating point may be located up to 10mm above the parting line
Gating point may be located up to 5mm above or below the parting line
For best operating results the Maxiflow® insert requires one central ejector and one supporting ejector. Please ensure that all sharp edges in the runner are thoroughly rounded. For reliable demolding, the diameter of the runner must exceed that of the curved tunnel.
Optimum gate geometry, with edges rounded
Contouring of a supporting ejector
258
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online