SLIDE ACTION COMPONENTS Slide Retainer Actuation Sequence Section Views
SLIDE ACTION COMPONENTS Angle Pins
Mold Closed
Mold Open Step 2: Mold is fully open. Movement of the B-side of molds causes A-side angle pins to push sliding cores away from stationary cores. Sliding cores must lock in position via slide retainers to ensure proper mate with angle pins when mold closes.
Molded part ejects. After ejection the mold may close. Angle pins will mate up with angle pin holes in sliding cores, pushing sliding cores towards the stationary cores. Ejection
DME Angle Pins are supplied with a pre-machined spherical radius on the head to eliminate angle grinding usually required on the pin head.
Step 1: Mold is closed, Sliding cores are in position for molding parts
M
MAX
+.000 –.005
M AND P DIMENSIONS SPECIFY PRESS FIT AREA ON ANGLE PINS
K
+.0000 –.0005
+.000 –.010 Ø H
Ø D
R
+.0000 –.0005
P
+.50 –.00
DIA
Slide Retainer ® • PSL0001 • PSL0002 • PSL0003
L LENGTH
Angle Pins– APD Material: H-13 Type Steel, 65-74 HRC Nitrided Surface, 30-35 HRC Core
Mold Machining and Installation Dimensions
ITEM NUMBER
L LENGTH
M MAX
K HD THK
R SPH RAD
ITEM NUMBER Ø A*
Ø D
Ø H
Ø P
B
C
Ø D
APD0305
5.00
.87
.3740
.500
.250
.3765
.375
10°
.256
APD0305 AND APD0307
APD0307
7.00
1.37
*.3765
15°
.264
.562
APD0405
5.00
.87
20°
.275
APD0407
.4990
7.00
1.37
.625
.250
.5015
.500
10°
.258
APD0405 THRU APD0410
APD0410
10.00
1.37
15°
.268
*.5015
.688
APD0505
5.00
.87
20°
.283
APD0507
.6240
7.00
1.37
.750
.250
.6265
.625
10°
.260
Smart Lock ® Slide Retainer • SLS2220
APD0510
10.00
1.37
APD0505 THRU APD0510
*.6265
.812
15°
.273
APD0607
7.00
1.37
20°
.291
APD0610
.7490
10.00
1.37
.875
.312
.7515
.750
10°
.324
APD0614
14.00
1.37
APD0607 THRU APD0614
15°
.339
*.7515
.938
APD0807
7.00
1.37
20°
.361
APD0810
.9990
10.00
1.37
1.125
.312
1.0015
1.000
10°
.328
APD0814
14.00
1.37
APD0807 THRU APD0814
15°
.348
*1.0015
1.188
See DME Standard Angle Pin Inserts, pre-machined for 10°, 15° or 20° angles.
20°
.377
Installation Notes 1.
*Refer to Installation Note #1.
U.S. 800-626-6653 ■ Canada 800-387-6600 ww.dme.net ■ Cut angle pin to length as required to achieve desired travel on slide. Typically, a spherical radius or cone shape with a spherical radius is machined on end of angle pin (opposite the head). 3. Spherical radius on head is suitable for angles up to and including 20°. Additional machining and installation data is available. Contact DME. All items in stock. HOW TO ORDER: Use Item Numbers in charts for ordering. Ø A dimensions specified for hole will provide approximately .000 to .001 clearance with the Ø P or press fit area of the angle pins. Moldmaker to adjust Ø A hole dimensions to obtain specific fit required. 2.
+.010 –.000
Mini-Might ® Slide Retainer • PSR1000 • PSR2000 • PSR3000
Ø H
C’BORE
+.001 –.000
B ANGLE
C
+.0005 –.0000
Ø A
store.dme.net
24
25
Made with FlippingBook - professional solution for displaying marketing and sales documents online