MOLD COOLING SV-Series Jiffy-Matic ® Connectors
MOLD COOLING SV-Series Jiffy-Matic ® Connectors
SV-Series Jiffy-Matic ® Connectors – JS Two-Way Automatic Shut-Off Type The DME line of SV- Series Jiffy-Matic Connectors features a male plug and socket, each with an automatic shut-off stemmed valve. These connectors are designed for use with plastics molds and die-cast dies in water, air or heat transfer oil lines. They feature a combination of brass and stainless steel in a leakproof construction, have a maximum rated capacity of 200 psi and will withstand temperatures up to 400°F with supplied Viton seals.
SV-Series Jiffy-Matic Male Plugs* – JS (Automatic Shut-Off Type with Stemmed Valve)
LENGTH L
PIPE THREAD
HEX SIZE
USED WITH SOCKETS*
Ø HOLE
DESCRIPTION
ITEM NUMBER
**The JP-352-SV male plug has a stepped valve-seat due to the internal space limitations of the 1/4 NPT thread. Even so, it has a greater flow rate than the JP-252-SV male plug, which also has the 1/4 NPT thread. SOCKET PLUG
1 5 ⁄
1 ⁄
4 NPT
1 ⁄ 1 ⁄
9 ⁄
JP252SV JS204SV TO JS226SV JP253SV
32
4
16
SOCKET
PLUG
1 3 ⁄
3 ⁄
8 NPT
11 ⁄
16
4
16
1 25 ⁄ 1 25 ⁄
1 ⁄
4 NPT
3 ⁄ 3 ⁄ 3 ⁄
9 ⁄
JP352SV**
DME SV-Series Jiffy-Matic Sockets can be used interchangeably with the Jiffy-Tite plugs already in your mold or die. However, the SV-Series Jiffy-Matic Male Plugs can ONLY be used with the SV-Series Jiffy-Matic Sockets. Comparable sizes of both types of sockets and plugs have the same O.D., permitting interchangeability even when the plugs are flush-mounted. The SV-Series Male Plugs are now supplied with Jiffy Seal ® thread sealant. Eliminating the initial need for joint tape or compound, the sealant will withstand temperatures up to 400°F and pressures up to 200 psi.
64
8
16
JS306SV TO JS328SV
3 ⁄ 1 ⁄
8 NPT 2 NPT
11 ⁄
JP353SV JP354SV
(BRASS) L (BRASS)
64
8
16
1 37 ⁄
7 ⁄
64
8
8
The SV-Series Jiffy-Matic Male Plugs operate only with the SV-Series Jiffy-Matic Sockets. All SV-Series Jiffy-Matic Male Plugs are supplied with Viton seals for use in water, air and heat transfer oil applications that do not exceed 400°F and 200 psi.
SV-Series Jiffy-Matic Sockets – JS (Automatic Shut-Off Type with Stemmed Valve)
FITS HOSE I.D. OR PIPE THREAD
HOSE STEM I.D. OR THRU HOLE
USED WITH SV-MALE, STD MALE, FEMALE OR EXTENSION PLUGS
ITEM NUMBER JS204SV JS205SV JS206SV JS306SV JS308SV JS214SV JS215SV JS216SV JS316SV JS318SV JS224SV JS225SV JS226SV JS326SV JS328SV
DESCRIPTION
The SV-Series Jiffy-Matic Male Plugs adds the capability of automatic shut-off at the mold, thereby minimizing coolant loss. SV-Series Jiffy-Matic ® Male Plugs (Automatic Shut-Off Type with Stemmed Valve)
1 ⁄
3 ⁄
JP(F/B) 250 TO 253 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 351 TO 354 (SV) JP(F/B) 351 TO 354 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 351 TO 354 (SV) JP(F/B) 351 TO 354 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 250 TO 253 (SV) JP(F/B) 351 TO 354 (SV) JP(F/B) 351 TO 354 (SV) JP(F/B) 250 TO 253 (SV)
4
16
5 ⁄
1 ⁄ 1 ⁄ 1 ⁄
16
4
3 ⁄ 3 ⁄ 1 ⁄
8
4
STRAIGHT STEM
8
4
SV-Series Jiffy-Matic ® Sockets (Automatic Shut-Off Type with Stemmed Valve)
3 ⁄
2
8
1 ⁄
3 ⁄
4
16
5 ⁄
1 ⁄ 1 ⁄ 1 ⁄
16
4
3 ⁄ 3 ⁄ 1 ⁄
8
4
8
4
90° STEM
3 ⁄
2
8
1 ⁄
3 ⁄
4
16
STEMMED VALVE (SV)
STEMMED VALVE (SV)
STEMMED VALVE (SV)
5 ⁄
1 ⁄ 1 ⁄ 1 ⁄
STEMMED VALVE (SV)
16
4
The DME SV-Series Jiffy-Matic Sockets feature an automatic shut-off stemmed valve that is designed to work with the SV-Series Jiffy-Matic Male Plugs, as well as the standard male, female and extension plugs. The sockets open automatically when connected and shut-off automatically when disconnected. The SV-Series Jiffy- Matic Sockets are designed to keep flow restriction to a minimum and are available with either straight, 45° or 90° hose stems.
3 ⁄ 3 ⁄ 1 ⁄
8
4
The DME SV-Series Jiffy-Matic Male Plugs feature an automatic shut-off stemmed valve. This plug design adds the capability of automatic shut-off at the mold. The plug’s shut-off stemmed valve minimizes mold coolant loss, thereby decreasing clean-up time and the possibility of rust occurring on the mold surface. The SV-Series Jiffy-Matic Male Plug can ONLY be used with the SV-Series Jiffy-Matic Socket.
8
4
3 ⁄
45° STEM
2
8
JS200SV
1 ⁄
8 NPT
1 ⁄
4
JS300SV
1 ⁄
4 NPT
3 ⁄
JP(F/B) 351 TO 354 (SV)
FEMALE NPT THREAD
8
JS201MSV
1 ⁄
8 NPT
1 ⁄
JP(F/B) 250 TO 253 (SV)
4
JS302MSV
1 ⁄
4 NPT
3 ⁄
JP(F/B) 351 TO 354 (SV)
MALE NPT THREAD
8
Operating Combinations
90° and 45° (For Female and Male NPT Sockets Only)
Two-Way Shut-Off*
One-Way Shut-Off
SV-SERIES SOCKETS (EQUIVALENT SIZE)
STD. MALE, FEMALE OR EXTENSION PLUGS
SV-SERIES SOCKETS (EQUIVALENT SIZE)
SV-SERIES* MALE PLUGS
WITH
WITH
DESCRIPTION
ITEM NUMBER
PIPE THREAD
THRU HOLE
USED WITH SOCKETS
20090 30090 50090 20045 30045 50045
1 ⁄
8 NPT
7 ⁄
JS200 (V/SV) TO JS201M (V/SV) JS300 (V/SV) TO JS302M (V/SV)
32
1 ⁄
4 NPT
5 ⁄ 9 ⁄
16
These 90° and 45° NPT elbows can be used with either Jiffy-Tite or Jiffy-Matic, V or SV, female or male NPT sockets only.
1 ⁄ 1 ⁄
2 NPT 8 NPT
JS500 (V) TO JS504M (V)
90° NPT ELBOW 90° NPT ELBOW
16
7 ⁄
JS200 (V/SV) TO JS201M (V/SV) JS300 (V/SV) TO JS302M (V/SV)
32
VALVE CLOSED
VALVES CLOSED
1 ⁄
4 NPT
5 ⁄ 9 ⁄
16
1 ⁄
2 NPT
JS500 (V) TO JS504M (V)
45° NPT ELBOW 45° NPT ELBOW
16
VALVE OPEN
VALVES OPEN
*The SV-Series Jiffy-Matic Male Plugs can only be used for two-way shut-offs and must be used with the SV-Series Jiffy-Matic Sockets.
228
229
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ www.dme.net ■ store.dme.net
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ www.dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online