MOLD COMPONENTS – INCH Guided Ejection Bushings Solid Bronze Guided Ejection Bushings – BEB Solid Bronze Guided Ejection Bushings feature high-strength bronze and natural lubricity. Internal oil grooves and a lubrication hole help to ensure smoother mold operation. It is recommended that a minimum of four bushings be installed. The size of the bushings should be determined by the size of the mold. The Guided Ejection System is inexpensive protection against wear and possible costly damage to a mold in production.
MOLD COMPONENTS – INCH Guided Ejection Bushings
•
Holds the ejector assembly in alignment
•
Supports the weight of the ejector assembly throughout the entire cycle
•
Reduces wear on ejection components
•
Prevents cocking of the ejector plates
Bronze-Plated Guided Ejection Bushings – GEB The Bronze-Plated Guided Ejection Bushings feature the strength of steel plus the nonscoring lubricity of bronze plating. Internal oil grooves and a lubrication hole help to ensure smoother mold operation. It is recommended that a minimum of four bushings be installed. The size of the bushings should be determined by the size of the mold. The Guided Ejection System is inexpensive protection against wear and possible costly damage to a mold in production.
B
DME Guided Ejection Systems are available installed in standard mold bases. For additional information and prices, contact DME.
•
Holds the ejector assembly in alignment
+.000 –.005
.187
•
Supports the weight of the ejector assembly throughout the entire cycle
•
Reduces wear on ejection components
Ø A
Ø H
Ø D Ø E
B
•
Prevents cocking of the ejector plates
3/16
Ø D +.0005 -.0000
Ø E +.0005 -.0000
Ø A +.000 -.001
Ø H +.000 -.010
L +.00 -.03
NOMINAL I.D.
ITEM NUMBER
B K
K
3 ⁄
.751
1.1255 1.1240 1.302
1.50
1.00
.56
GEB750
4
7 ⁄
.876
1.2505 1.2490 1.427
1.50
1.00
.56
GEB875
L
8
Ø D
Ø E
Ø A
Ø H
1"
1.001 1.3755 1.3740 1.552
1.75
1.12
.62
GEB100
Ø D +.0005 -.0000
Ø E +.0005 -.0000
Ø A +.000 -.001
Ø H +.000 -.010
L +.00 -.03
B +.000 -.015
K ±.01
1 1 ⁄
1.251 1.6255 1.6240 1.802
1.75
1.12
.62
GEB125
ITEM NUMBER
NOMINAL I.D.
4
1 1 ⁄
1.501 2.0005 1.9990 2.177
1.75
1.12
.62
GEB150
2
1 ⁄
.501
.7505
.749
.853
1.50
1.00
.56
BEB500
2
NOTE: Select corresponding guide pin in proper diameter and length for application.
BEB750
3 ⁄
.751
1.1255
1.1240 1.302
1.50
1.00
.56
4
K
Self-Lubricating Guided Ejection Bushings – GBE It is recommended that a minimum of four bushings be installed. Bushing size should be determined by the size of the mold. The Guided Ejection System is inexpensive protection against wear and possible costly damage to a mold in production.
BEB875
7 ⁄
.876
1.2505
1.2490 1.427
1.50
1.00
.56
8
BEB1000
1"
1.001
1.3755
1.3740 1.552
1.75
1.12
.62
L
BEB1250
1 1 ⁄
1.251
1.6255
1.6240 1.802
1.75
1.12
.62
4
BEB1500
1 1 ⁄
1.501
2.0005
1.9990 2.177
1.75
1.12
.62
2
BEB2000
2
2.001
2.5005 2.499
2.687
2.25
1.62
.80
B
NOTE: Select corresponding guide pin in proper diameter and length for application.
NOMINAL I.D.
+.000 -.010
+.00 -.03
ITEM NUMBER
+.0005 -.0000
+.0005 -.0000
+.000 -.001
Ø H
L
Ø D
Ø E
Ø A
B
3/16
3 /
.751
1.1255
1.1240
1.302
1.50
1.00
GBE0750
4
7 /
.876
1.2505
1.2490
1.427
1.50
1.00
GBE0875
8
1"
1.001
1.3755
1.3740
1.552
1.75
1.12
GBE1000
DME Guided Ejection Systems are available installed in standard mold bases. For additional information and prices, contact DME.
1 1 / 1 1 /
1.251
1.6255
1.6240
1.802
1.75
1.12
GBE1250
4
Ø D
Ø E
Ø A
Ø H
1.501
2.0005
1.9990
2.177
1.75
1.12
GBE1500
2
2"
2.001
2.5005
2.4990
2.687
2.25
1.62
GBE2000
All items in stock.
NOTES: 1. Select corresponding guide pin in proper diameter and length for application. 2. These bushings are interchangeable with comparably sized DME bronze-plated and solid
bronze guided ejection bushings. 2" I.D. size (GBE-2000) is available only in self-lubricating style.
L
266
267
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net store.dme.net
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ www.dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online