MOLD COMPONENTS – INCH Guided Ejection Systems
MOLD COMPONENTS – INCH Guided Ejection Systems
S
Guided Ejection Systems hold the ejector assembly in alignment and support the weight of the ejector assembly throughout the molding cycle – greatly reducing wear on ejection components and preventing cocking of the ejector assembly.
5
For quoting or ordering, specify:
SYSTEM 1 When pins are installed in the support plate, the ejector housing can be removed from the mold without removing ejector plates. This permits easy access to service the ejector system.
SYSTEM 2 Pins installed in the ejector housing permit fast installation. When the ejector housing is removed from the mold base, the complete ejector assembly is removed.
Guided Ejection System Type ❑ System 1 ❑ System 2 Quantity (2 or 4): _________ Guided Ejection Bushing Type ❑ Bronze-Plated Steel Bushings ❑ Self-Lubricating Bushings
”L”
”L”
GE-X (4)
GE-X (2)
Offset (1)
Offset (1)
GE dia. leader pin for guided ejection (2) places as shown
GE dia. leader pin for guided ejection (4) places as shown
GE-Y (4)
”W”
”W”
Leader Pin
Leader Pin
Leader Pin
Leader Pin
Guided Ejection Position: ❑ STD ❑ Specify
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
“B” HALF OF MOLD FOR 88, 812 & 108 MOLD BASE SIZE ONLY
“B” HALF OF MOLD FOR 1012 – 2435 BASES
Recommended position from table provided standard (see opposite page). If a different position is required, specify below.
SYSTEM 1
SYSTEM 2
SYSTEM 1
SYSTEM 2
Guided Ejection Positions
PIN DIAMETER (RECOMMENDED)
BASE SIZE
PIN DIAMETER (RECOMMENDED)
BASE SIZE
GEx
GEy
GEx
GEy
88
3.000 Center 5.000 Center 3.062 Center
1518 1524 1529 1616 1620 1623 1626 1629 1635 1724 1729 1818 1820 1823 1826 1829 1835 1924 1929 1935 2424 2429 2435
7.875
2.375 2.375 2.375 2.875 2.875 2.875 2.875 2.875 2.875 3.125 3.125 3.875 3.875 3.875 3.875 3.875 3.875 4.625 4.625 4.625 6.125 6.125 6.125
GEx____________ GEy____________
812 108
10.812 13.688
1012 1016 1020 1112 1114 1118 1123
5.000 7.062 9.062 5.062 6.062 8.062
1.000 1.000 1.000 1.625 1.625 1.625 1.625 1.750 1.750 1.750 1.750 2.375 2.375 2.375 2.375 2.375 2.375
6.938 8.938
0.750
10.688 11.938 13.688 16.688 10.812 13.688
Diameter: ❑ STD ❑ Specify
Recommended diameter from table provided standard. If a different diameter is required, it will require a positioning change; specify below. Available diameters:
10.812
1.000
212
5.000 6.500 9.000
1215 1220 1223 1315 1318 1321 1323 1326 1329
7.938 8.938
10.750
10.688 11.038 13.688 16.688 10.812 13.688 16.688 10.688 13.562 16.562
6.500 8.000 9.375
0.875
10.750 12.000 13.750
❑ 0.750 ❑ 0.875 ❑ 1.000 ❑ 1.250
1.250
268
269
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net store.dme.net
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ www.dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online