SLIDE ACTION COMPONENTS Bronze-Plated Wear Plates – Metric
SLIDE ACTION COMPONENTS Bronze-Plated Wear Plates – Metric
Bronze-Plated Wear Plates – WPM Metric
ITEM NUMBER BY 1 IN. (25.4mm)
ITEM NUMBER BY 1 IN. (25.4mm)
T THICKNESS +0.0 –0.051
T THICKNESS +0.0 –0.051
W WIDTH +0.0 –2.032
W WIDTH +0.0 –2.032
WPM0405
25mm
WPM1005
25mm
4mm
T
WPM0420
100mm
WPM1006
30mm
WPM0505
25mm
WPM1007
35mm
L
10mm
WPM0506
30mm
WPM1008
40mm
5mm
W
WPM0515
75mm
WPM1010
50mm
WPM0520
100mm
WPM1020
100mm
WPM0606
30mm
WPM1210
50mm
WPM0608
40mm
WPM1215
12mm
75mm
DME Bronze-Plated Wear Plates provide a long-lasting wear surface for Bronze-Plated molds requiring slides, cams or flat surfaces where frictional wear is a factor. • In order to be flat this material must be fastened to a flat surface
6mm
WPM0610
50mm
WPM1220
100mm
WPM0612
60mm
WPM1575
75mm
• Parallel 0.025in. (0.635mm) within 47.992in. (1219mm) • Thickness of bronze: 0.20in. to 0.25in. (5.08mm to 6.35mm) • Milled edges
WPM0805
25mm
WPM1520
100mm
15mm
WPM0812
8mm
60mm
WPM1525
125mm
WPM0815
75mm
WPM1530
150mm
Standard wear strips are plated on one side only. Up to four sides can be plated, call DME for a cost quotation.
WPM2020
20mm 100mm
WPM2505
25mm
25mm
WPM2520
100mm
NOTE: Wear Plate lengths are available in 1in. (25.4mm) increments. Minimum cut length is 3in. ( 76.2 mm.)
NOTE: Machining may cause distortion which can result in the loss of flatness of the part. Once altered, DME will not replace wear strips. DME offers custom wear strips that meet your application needs. Please send your prints to DME@dme.net to receive a cost quotation.
All items in stock.
WHEN ORDERING, PLEASE SPECIFY: 1. Item numbers from tables 2. Plate length 3. Number of pieces 4. Method of shipment
U.S. 800-626-6653 ■ Canada 800-387-6600 ww.dme.net ■
store.dme.net
32
33
Made with FlippingBook - professional solution for displaying marketing and sales documents online