Mold Components

INCH PINS, SLEEVES, BLADES INCH Ejector Blades

INCH PINS, SLEEVES, BLADES INCH Ejector Sleeves – Nitrided O.D. & I.D.

+.0000 –.0010

GENEROUS LEAD-IN APPROXIMATELY 1º/SIDE

.02 x 45º CHAMFER

• Blade thickness and width are held to close tolerance: +.0000/-.0003 • Precision made of superior quality M2 high- speed tool steel • Through-hardened to 58-62 HRC for superior wear resistance • Heads annealed for easy machining • One-piece construction for increased strength and rigidity INFORMATION KEY: D = Shoulder Diameter

Ø E

+.0005 +.0000

Ø H

Ø D

.50

Ø D + .015

.031 R MAXIMUM

K

2.25

L

• Precision made of superior quality thermal shock resisting hotwork die steel • Hot-forged heads provide uniform grain flow, higher tensile strength • Outside diameter nitrided to 65-74 HRC hardness and finished to minimize wear • Centerless ground and polished outer diameter

• Inside bearing diameter is nitrided to 65-74 HRC hardness and finished honed • Lead-in taper designed to allow interference-free entry of the ejector pin into the sleeve • SND sleeve I.D. is nitrided for prolonged wear resistance and improved lubricity

H = Head Diameter K = Head Thickness L = Overall Length T = Blade Thickness W = Blade Width Material: M2 / 1.3343 / SKH51 Surface Treatment: None (Through-Hard)

INCH Ejector Sleeves – SND

ITEM NUMBER PREFIX

Ø H HEAD DIA

K HEAD THICK

L = LENGTH

Ø D I.D.

Ø E O.D.

3

4

5

6

7

8

9

10

11

12

13

14

INCH Ejector Blades – EJB-IMH

† SND13_*_ 3/32 (.0937) 3/16 (.1875)

.375 .375 .406 .406 .437 .437 .500 .500 .562 .562 .625 .625 .687 .687 .750 .750 .875 .875 .937 .937

.187 .187 .187 .187 .187 .187 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250

† SND13_*_OS 3/32 (. 0 937)

0.1925

T BLADE THICKNESS

W BLADE WIDTH 0.1000 0.1000 0.1000 0.1000 0.1000 0.1400 0.1400 0.1400 0.1400 0.1400 0.1400 0.1400 0.1720 0.1720 0.1720 0.1720 0.1720 0.1720 0.1720 0.1720 0.1720 0.1720 0.2340 0.2340 0.2340 0.2340 0.2340 0.2340 0.2340 0.2340 0.2340 0.2340 0.2960 0.2960 0.2960 0.2960

Ø D SHOULDER DIAMETER

Ø H HEAD DIAMETER

K HEAD THICKNESS

L OVERALL LENGTH

ITEM NUMBER

† SND15_*_

1/8 (.1250) 7/32 (.2187)

† SND15_*_OS 1/8 (.1250) SND17_*_ 5/32 (.1562) SND17_*_OS 5/32 (.1562)

0.2237

EJB-IMH-024-100-065 EJB-IMH-032-100-065 EJB-IMH-032-100-075 EJB-IMH-046-100-065 EJB-IMH-046-100-075 EJB-IMH-024-140-065 EJB-IMH-032-140-065 EJB-IMH-032-140-075 EJB-IMH-032-140-085 EJB-IMH-046-140-065 EJB-IMH-046-140-075 EJB-IMH-046-140-085 EJB-IMH-024-172-065 EJB-IMH-032-172-065 EJB-IMH-032-172-075 EJB-IMH-032-172-085 EJB-IMH-046-172-065 EJB-IMH-046-172-075 EJB-IMH-046-172-085 EJB-IMH-062-172-065 EJB-IMH-062-172-075 EJB-IMH-062-172-085 EJB-IMH-032-234-065 EJB-IMH-032-234-075 EJB-IMH-032-234-085 EJB-IMH-046-234-065 EJB-IMH-046-234-075 EJB-IMH-046-234-085 EJB-IMH-062-234-065 EJB-IMH-062-234-075 EJB-IMH-062-234-085 EJB-IMH-062-234-095 EJB-IMH-032-296-065 EJB-IMH-032-296-075 EJB-IMH-032-296-085 EJB-IMH-032-296-095

0.0240 0.0320 0.0320 0.0460 0.0460 0.0240 0.0320 0.0320 0.0320 0.0460 0.0460 0.0460 0.0240 0.0320 0.0320 0.0320 0.0460 0.0460 0.0460 0.0620 0.0620 0.0620 0.0320 0.0320 0.0320 0.0460 0.0460 0.0460 0.0620 0.0620 0.0620 0.0620 0.0320 0.0320 0.0320 0.0320

0.1250 0.1250 0.1250 0.1250 0.1250 0.1562 0.1562 0.1562 0.1562 0.1562 0.1562 0.1562 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 0.2500 0.2500 0.2500 0.2500 0.2500 0.2500 0.2500 0.2500 0.2500 0.2500 0.3125 0.3125 0.3125 0.3125

0.250 0.250 0.250 0.250 0.250 0.281 0.281 0.281 0.281 0.281 0.281 0.281 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.375 0.437 0.437 0.437 0.437 0.437 0.437 0.437 0.437 0.437 0.437 0.500 0.500 0.500 0.500

0.125 0.125 0.125 0.125 0.125 0.156 0.156 0.156 0.156 0.156 0.156 0.156 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.187 0.250 0.250 0.250 0.250

6.50 6.50 7.50 6.50 7.50 6.50 6.50 7.50 8.50 6.50 7.50 8.50 6.50 6.50 7.50 8.50 6.50 7.50 8.50 6.50 7.50 8.50 6.50 7.50 8.50 6.50 7.50 8.50 6.50 7.50 8.50 9.50 6.50 7.50 8.50 9.50

1/4 (.2500)

0.2550

SND21_*_ 3/16 (.1875) 5/16 (.3125)

SND21_*_OS 3/16 (.1875)

0.3175

SND23_*_ 7/32 (.2187) 11/32 (.3437)

SND23_*_OS 7/32 (.2187)

0.3487

SND25_*_

1/4 (.2500)

3/8 (.3750)

SND25_*_OS 1/4 (.2500)

0.3800

SND29_*_ 5/16 (.3125) 7/16 (.4375)

SND29_*_OS 5/16 (.3125)

0.4425

SND33_*_

3/8 (.3750)

1/2 (.5000)

SND33_*_OS 3/8 (.3750) SND37_*_ 7/16 (.4375) SND37_*_OS 7/16 (.4375)

0.5050

5/8 (.6250)

0.6300

SND39_*_

1/2 (.5000) 11/16 (.6875)

SND39_*_OS 1/2 (.5000) SND41_*_ 9/16 (.5625) SND41_*_OS 9/16 (.5625)

0.6925

3/4 (.7500)

1.000 1.000 1.125 1.125 1.250 1.250

0.7550

SND45_*_

5/8 (.6250)

7/8 (.8750)

SND45_*_OS 5/8 (.6250)

0.8800

SND47_*_

3/4 (.7500)

1 (1.0000)

SND47_*_OS 3/4 (.7500) .250 † SND13 and SND15 have a 1.75 bearing length. All sleeves are for use with DME INCH Ejector Pins. 1.0050

*HOW TO ORDER: Combine Item Prefix and the length (L dimension) desired. • Precede single digit lengths with a zero. Examples: SND2506, SND1710

KEY TO CHART

In stock

Non-stocked - Call for lead time Special Order

32 2

32 3

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme@dme.net ■ www.dme.net ■ https://dme.net/estore

U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme@dme.net ■ www.dme.net ■ https://dme.net/estore

Made with FlippingBook - professional solution for displaying marketing and sales documents online