MOLD ASSEMBLY Hoist Rings – INCH
Whether you're hoisting an 800-pound mold base or a 15,000-pound piece of molding room equipment, DME Hoist Rings can add a margin of performance and convenience to the job at hand. The inherent danger posed by conventional static eyebolts (side-load breakage and hook disengagement) combined with stricter safety regulations make DME Hoist Rings an important addition to any mold shop or molding plant. Unlike eyebolts, these Hoist Rings will not yield to heavy side loads within their rated capacity and can pivot 180° and swivel 360° to compensate for pitch, roll and sway when lifting heavy, unbalanced loads. As with all mechanical devices, regular inspection for wear, and strict adherence to installation and operating guidelines is necessary to prevent failure due to misuse.
• Safer and stronger than conventional eyebolts • Pivots and swivels to compensate for pitch, roll and sway when lifting heavy or unbalanced loads • Prevents accidents caused by eyebolt breakage or lifting hook disengagement • Will not yield to heavy side loads when used in accordance with manufacturer’s instructions • Manufactured from high-quality alloy steel (certified heat treatment) • Meets or exceeds MIL-STD-1365 (OR-11) and MIL-STD-209C • Seven sizes to handle loads from 800 to 15,000 pounds • Safety factor is 5 times the rated load capacity in any direction
180° PIVOT
360° SWIVEL
See what happens when heavy side loads are applied to a conventional eyebolt.
The same load applied to a DME Hoist Ring is translated into a primary tension load at the bolt and normal to the bolt axis.
EXCESSIVE SIDE LOADS CAN CAUSE BOLT FAILURE.
HIGH-TENSION LOADS ARE WELL WITHIN THE DESIGNED SAFETY LIMITS OF THE STRESSED HOIST RING.
385
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online