MOLD ASSEMBLY Lifting Holes
Lifting Holes can be used to install hoist rings for ease of handling. Mold base can be configured only with Lifting Holes which are appropriate for the specific mold base size. Refer to the preceding pages for a comprehensive selection of hoist rings.
Lifting Hole Diameters
Lifting Holes Lifting holes can be selected up to three per plate edge. They are available in top clamp plate, A-plate, B-plate, support plate, and bottom clamp plate. FOR QUOTING OR ORDERING, SPECI-
PLATE THICKNESS
BASE SIZE
0.875
1.375
88-1118
1 ⁄ 5 ⁄ 5 ⁄ 5 ⁄
2 -13 UNC 8 -11 UNC 8 -11 UNC 8 -11 UNC
1 ⁄ 5 ⁄ 3 ⁄ 2 -13 UNC 8 -11 UNC 4 -10 UNC 1"-8 UNC 1"-8 UNC
1123-1524 1529-1829 1835-2429
2435
N/A
Lifting Holes
T MAX.
THREAD SIZE
S
Note that for safety reasons, only the recommended hole diameters (or larger) shown in the table are offered.
1 ⁄ 5 ⁄ 3 ⁄
2 -13 8 -11 4 -10
1.00 1.25 1.50 2.00
1.38 1.75 2.00 2.62
1"-8
Diameter________________
Quantity in each plate______
Plates with lift holes_ ______ _______________________ _______________________ _______________________
_______________________ (Prints required if not on center)
391
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online