CHAPTER 18.80 AIRPORT SAFETY COMBINING ZONE; A-S 18.80.010 Purpose 18.80.020 Application Of Provisions 18.80.022 Definitions 18.80.024 Imaginary Surface And Noise Impact Boundaries 18.80.026 Notice Of Land Use And Permit Applications 18.80.028 Height Limitations 18.80.030 Redmond Municipal Airport 18.80.032 Bend Municipal Airport 18.80.034 Sunriver Airport 18.80.036 Sisters Eagle Air Airport 18.80.038 Cline Falls Airpark 18.80.040 Juniper Airpark 18.80.056 Additional Requirements 18.80.058 Non-Conforming Uses 18.80.060 Variances 18.80.062 Dimensional Standards 18.80.064 Procedures 18.80.072 Water Impoundments 18.80.074 Wetland Mitigation, Creation, Enhancement, And Restoration 18.80.044 Land Use Compatibility 18.80.050 Uses Permitted Outright 18.80.054 Conditional Uses
18.80.076 Water Impoundment Notification 18.80.078 FAA Notification (Form 7460-1) 18.80 Table 1 Land Use Compatibility 18.80 Table 2 Noise Compatibility 18.80 Declaration Of Anticipated Noise 18.80.010 Purpose
In any zone that is overlain by an Airport Safety Combining Zone (AS Zone), the requirements and standards of DCC 18.80.010 shall apply in addition to those specified in the ordinance for the underlying zone. If a conflict in regulations or standards occurs, the more restrictive provisions shall govern. The purpose of the AS Zone is to restrict incompatible land uses and airspace obstructions around airports in an effort to maintain an airport’s maximum benefit. The imaginary surfaces and zones; boundaries and their use limitations comprise the AS Zone. Any uses permitted outright or by conditional use in the underlying zone are allowed except as provided for in DCC 18.80.044, 18.80.050, 18.80.054, 18.80.056 and 18.80.058. The protection of each airport’s imaginary surfaces will be accomplished through the use of those land use controls deemed necessary to protect the community it serves. Incompatible uses may include the height of trees, buildings, structures or other items and uses that would be subject to frequent aircraft over-flight or might intrude into areas used by aircraft. HISTORY Adopted by Ord. PL-15 on 11/1/1979 Repealed & Reenacted by Ord. 91-020 §1 on 5/29/1991
Amended by Ord. 2001-001 §2 on 1/22/2001 18.80.020 Application Of Provisions
The provisions of DCC 18.80.020 shall only apply to unincorporated areas located under airport imaginary surfaces and zones, including approach surfaces, transitional surfaces, horizontal surfaces,
Made with FlippingBook - professional solution for displaying marketing and sales documents online