CAPABILITY STATEMENT: ARCAERO
PAGE 7
To derive wind loads, two complementary approaches were adopted. A larger-scale façade model was tested in an aeronautical wind tunnel, with an instrumented fin flanked by neighbours to measure wind load coefficients.
These results were combined with wind speed and turbulence data from the 1:300 atmospheric boundary layer model, which captured variations with height, position, and wind direction. Because the uppermost row projected above the roof and experienced a different wind regime, these fins were instead pressure-tapped directly on the 1:300 model to capture their specific loads. To investigate resonance, a larger-scale model was designed by Professor Tom Wyatt to reproduce scaled bending and torsion modes of the fins and the vibrational behaviour of the ETFE fabric. Testing with and without neighbouring fins produced full-scale RMS displacement estimates across wind speeds and directions. Later, a roof extension was added to reduce wind-driven rain affecting spectators. To support this, CFD simulations were used to explore solutions, validated by wind tunnel testing.
Made with FlippingBook - Online magazine maker