15. The bed is now ready to be filled.
16. RE-CHECK that the cover and foam sides are square on the base and that the base is in the correct position. Once the bed is filled, you will not be able to move it. 17. The mattress is filled by means of a hose. Do not leave unattended while filling takes place. 18. When the mattress is ¾ full, add the bottle of water conditioner and continue filling the mattress.
19. When filled it should be nearly level with the top of the foam.
20. It is important to get the air out of the mattress. This is done by pressing gently on the mattress as it nears full. 21. When full, replace the plug, screw back on the cap and push the valve back into the mattress. 22. Tuck excess safety liner between the mattress and the outside of the foam walls. For Vibroacoustic Waterbed with Platform Bluetooth Amplifier Connection
1.
Plug in the cord at the wooden base.
2. Connect stereo wires to the Vibroacoustic Bluetooth Amplifier.
3. Pair your phone or tablet to the Bluetooth Amplifier (Shaibang). The vibration will come through the base shakers underneath the base. 4. IMPORTANT! Do not turn the music volume up beyond the mark on the stereo receiver.
Safety Precautions - The safety of your clients is dependent on the appropriate choice of activity to match yet challenge their physical abilities. Use appropriate spotting / safety techniques. In addition, the layout of your activity area, proper installation and maintenance of your equipment is critical. TFH equipment is not intended for general recreational use. Under no condition should this equipment be used without proper supervision. This sheet is for example only. It is not meant to, in any way, replace local, State, or Federal standards. Be aware - it is your responsibility to find all pertinent safety information that pertains to your facility.
All TFH Products are to be used under adult supervision at all times.
TFH061422
Made with FlippingBook - professional solution for displaying marketing and sales documents online