Carbide CT High Performance Triple Chip Tungsten carbide
The strong, high-performance triple chip Tungsten Carbide Tipped (CT) Hole Saw offers a longer blade life when cutting difficult and abrasive materials. A cost-effective solution for cutting through nail-embedded wood, or virtually any wood and metal combination, reinforced concrete, and fibreglass. This saw is particularly suitable where there is a requirement for a high-quality surface finish on the entry and exit hole and provides a smooth cut when cutting traditional lath and plaster.
Tungsten Carbide Tipped Teeth
Diameter
Item Number
Appropriate Arbors
Cat. No.
mm Inch
new
CT058
BF398
16mm 5/8”
CT034
BF400
19mm 3/4”
A1 or A4 A1-1 (SDS plus) A3 & A3-3 (Ulti-Mate) A6 & A6-2 (Kwik-Change) XA1 or XA4 (Carbide Tipped)
CT2532
BF402
20mm 25/32”
FEATURES
CT078
BF405
22mm 7/8”
CT100
BF410
25mm 1”
• A cost effective solution for cutting nail embedded wood, any wood and metal combination, reinforced concrete and fibreglass. • Leaves high quality surface finish on entry and exit and provides a smooth cut. • Tungsten Carbide Tipped Teeth for outstanding cutting performance and product durability. • Suitable for use in electric and battery operated tools. • Hole saw depth of 41mm (1-5/8”).
CT118
BF415
29mm 1.1/8”
CT114
BF420
32mm 1.1/4”
CT156 #
BF422
33mm 1.5/16”
CT138
BF425
35mm 1.3/8”
CT112
BF430
38mm 1.1/2”
CT196
BF432
40mm 1.9/16”
CT158
BF435
41mm 1.5/8”
CT134
BF440
44mm 1.3/4”
CT178
BF445
48mm 1.7/8”
CT200
BF450
51mm 2”
CT218
BF455
54mm 2.1/8”
HSS Pilot Drill A2 A10 A17-38 (Locking Arbor) A2-1 (SDS plus) Carbide Tipped Arbors XA2 XA10 XA17-38 (Locking Arbor) XA2-1 (SDS plus) Ulti-Mate Arbor System A3 & A3-4 for up to 102mm / 4”.
CT056MM BF456
56mm 2.3/16”
CT214
BF460
57mm 2.1/4”
CT238
BF465
60mm 2.3/8”
Cutting Performance
Veneer
CT212
BF470
64mm 2.1/2”
CT258
BF475
67mm 2.5/8”
Excellent
Plastic
CT234
BF480
70mm 2.3/4”
Good
CT300
BF485
76mm 3”
CT318
BF487
79mm 3.1/8”
Acrylic
41mm 1.5/8”
Hole Saw Depth
CT314
BF490
83mm 3.1/4”
CT338
BF495
86mm 3.3/8”
Ceramic
<3mm 3-13mm
A3 & A3-5 for 102mm / 4” and above.
CT312
BF500
89mm 3.1/2”
CT358
BF505
92mm 3.5/8”
Rec. Cutting Depth
Kwik-Change A6 & A6-3* (*up to 100mm holesaws)
Fibreglass
CT334
BF510
95mm 3.3/4”
CT378
BF512
98mm 3.7/8”
CT400
BF515
102mm 4”
Formica
>13mm
CT418
BF520
105mm 4.1/8”
CT414
BF525
108mm 4.1/4”
Cast iron
Plaster
CT438
BF530
111mm 4.3/8”
CT412
BF535
114mm 4.1/2”
Suspended Floors
Wood
CT434
BF540
121mm 4.3/4”
CT500
BF545
127mm 5”
Nail Embedded Wood
Brick and Masonry
CT512
BF550
140mm 5.1/2”
CT600
BF555
152mm 6”
# = MTO - Made to order, may be subject to longer lead times.
12
Powered by FlippingBook