®
™
CUSTOM CHIMNEY CAP PRICING
COPPER
STAINLESS STEEL
GALVANNEALED STEEL
• 24-Gauge Removable Galvannealed Steel Hood with Scalloped Corners and Roll-Formed Edges for Extra Strength and Proper Rainwater Runoff • 24-Gauge Galvannealed Steel Base Flanges Designed for Secure Mounting • 18-Gauge 3/4” Galvannealed Steel Expanded Metal Mesh Available in 8”, 10” & 14” Heights to Allow Flue Clearance for a Strong Draft • 18-Gauge 5/8” Galvannealed Steel Expanded Metal Mesh Available in 8”, 10”, & 14” Heights (Use only When Required by Local Codes) • Ideal for Single-Flue and Multi-Flue Masonry Chimneys • Tool-Free Corners with a Tab-and-Slot System for Easy Assembly • Attractive Black Powder Coat Paint Finish • Multiple Stock and Custom Sizes Available • Arrests Sparks and Reduces Certain Downdrafts • Made in the USA
• 24-Gauge Removable 100 % Copper Hood with Scalloped Corners and Roll-Formed Edges for Extra Strength and Proper Rainwater Runoff • 24-Gauge Copper-Plated Stainless Steel Base Flanges Designed for Secure Mounting • 18-Gauge 3/4” 100 % Copper Expanded Metal Mesh, Available in 9”, 12” & 14” Heights to Allow Flue Clearance for a Strong Draft • Ideal for Single-Flue and Multi-Flue Masonry Chimneys • Tool-Free Corners with a Tab-and-Slot System for Easy Assembly • Available with Hinged Mounting Flanges for Easier Mounting on Sloped or Uneven Chimney Crowns • Multiple Stock and Custom Sizes Available • Arrests Sparks and Reduces Certain Downdrafts • Provides a Clean, Professional Wildlife Exclusion Solution™ • Made in the USA
• 24-Gauge Removable 100 % 304 Stainless Steel Hood with Scalloped Corners and Roll-Formed Edges for Extra Strength and Proper Rainwater Runoff • 24-Gauge 100 % 304 Stainless Steel Base Flanges Designed for Secure Mounting • 18-Gauge 3/4” 100 % 304 Stainless Steel Expanded Metal Mesh, Available in 8”, 10” & 14” Heights to Allow Flue Clearance for a Strong Draft • 18-Gauge 5/8” 100 % 304 Stainless Steel Expanded Metal Mesh Available in 8”, 10” & 14” Heights (Use only When Required by Local Codes) • Ideal for Single-Flue and Multi-Flue Masonry Chimneys • Tool-Free Corners with a Tab-and-Slot System for Easy Assembly • Available with Hinged Mounting Flanges for Easier Mounting on Sloped or Uneven Chimney Crowns • Multiple Stock and Custom Sizes Available • Arrests Sparks and Reduces Certain Downdrafts • Made in the USA
PRICING CUSTOM BIG TOPS™
Maximum Screen-to-Screen Dimensions: CUSTOM BIGTOP™ CHIMNEY CAP
Calculate the Cost of the Chimney Cap by Using the Formula and Guidelines Below: 1. Add the base width (W) and the base length (L) of the chimney cap together to determine the sum (S). W + L = S 2. Multiply the sum (S) by the appropriate factor (F) on the chart to the right. Round the width and length to the nearest whole number for pricing. S x F = COST 3. Determine the mesh height by adding 5” to the height of the tallest tile. 4. For widths greater than the limitations listed above, contact HY-C® Customer Service at 800-325-7076. All units with a width +/= 32” will be shipped with a minimum of 10” mesh. GALVANNEALED STEEL CHIMNEY CAP SAFETY STATEMENT: Do not use in situations where oil or coal is burned, or when wood or wood pellets are used as the home’s primary source of heat (e.g., a wood furnace chimney or pellet stove chimney).
CHIMNEY CAP TYPE
MAXIMUM WIDTH
MAXIMUM LENGTH
Copper
40”
88”
Stainless Steel
40”
88”
Black Galvannealed Steel
40”
96”
CUSTOM BIGTOP™ CHIMNEY CAP FACTORS
MESH HEIGHT
COPPER FACTOR
STAINLESS FACTOR
GALVANNEALED FACTOR
8”
$14.25
$8.16
Call HY-C® for Pricing Information 800-325-7076
10”
$15.48
$9.03
14”
$18.30
$10.58
Minimum Charge
$240.00
$210.00
$140.00
10950 Linpage Place St. Louis, MO 63132
1-800-325-7076
www.hy-c.com
sales@hy-c.com
12HYC024_4.25
Page 1Made with FlippingBook - professional solution for displaying marketing and sales documents online