Wireless Systems 2024
Wireless Systems
WIRELESS INTRODUCTION WIRELESS ATW-C
4
WIRELESS MANAGER - FREQUENCY
6
WIRELESS SERIES OVERVIEW
7
WIRELESS SYSTEMS 5000 Series
8
Engineered Sound® Wireless
10
3000 Digital Series
14
3000 Series
16
3000 Series IEM
20
2000 Series
22
System 10 / System 10 PRO
24
System 20 PRO
28
AT-One
30
Antennas
32
Accessories
34
cH/cW Mic Summary
34-37
WIRELESS APPLICATIONS Application 1 - Dual-channel wireless system
38
Application 2 - Single-channel wireless system covering two zones
39
Application 3 - Multiple zones wireless system
40
Application 4 - Four-channel wireless system
42
Application 5 - Multi-channel wireless system for install
44
Application 6 - 16-channel wireless system using ATW-DA49a
46
Application 7 - 16-channel wireless system using daisy chain 48 Application 8 - 64-channel wireless system / 256-channel wireless system 50 Application 9 - ESW Application 52 Application 10 - Up to 192 Channels of ES Wireless 54 Radio Equipment Directive (RED) - Restrictions 56
audio-technica wireless systems guide - 3
ATW-C / WIRELESS SYSTEMS
WIRELESS SYSTEMS / ATW-C
/ Interchangeable Microphone Capsules (IMC)
/ Cardioid Condenser ATW-C5400
/ Cardioid Condenser ATW-C3300
/ Hypercardioid Dynamic ATW-C6100
/ Cardioid Dynamic ATW-C4100
/ Cardioid Condenser ATW-C710
/ Cardioid Dynamic ATW-C510
/ Hyperardioid Dynamic ATW-C990
Interchangeable Microphone Capsules compatible with all Audio-Technica handheld transmitters with the interchangeable head option. All interchangeable microphone capsules can be used with ATW-T5202, ATW-T3202, ATW-DT3102 and ESW-T4102 handheld transmitters. Its industry-standard thread allows use with other compatible handheld transmitters.
/ Handheld Transmitter Body ATW-T5202
/ Handheld Transmitter Body ATW-DT3102
/ Handheld Transmitter Body ATW-T3202
/ Handheld Transmitter Body ESW-T4102
Condenser microphone capsules ATW-C5400 and ATW-C3300. An heritage from the world acclaimed studio microphones AT4050 and AT4033.
Same sound characteristics as the renowned AT4050 studio microphone offering extreme clarity and realism.
Same element as the classic AT4033a studio microphone offering extreme clarity and realism.
/ Interchangeable Cardioid Condenser Microphone Capsule ATW-C5400
/ Interchangeable Cardioid Condenser Microphone Capsule ATW-C3300
Clean, Crisp and Accurate
Warm and Flattering Sound
Transparent uppers/mids and rich low-end qualities are combined with advanced acoustic engineering for extensive performance abilities and a clean, crisp and accurate sound reproduction, even at high SPLs.
The AT4033a produces a warm and flattering sound that brings the versatility of a dynamic microphone, as well as the transparency and detail of a high-end capacitor model for a vintage effect.
audio-technica wireless systems guide - 5
4 - audio-technica wireless systems guide
WIRELESS SYSTEMS / WIRELESS MANAGER
SERIES OVERVIEW / WIRELESS SYSTEMS
Everything under control The Wireless Manager software supports the setup, control, and monitoring of compatible Audio-Technica wireless devices. The software allows you to determine device settings, make and coordinate frequency plans while offline, and configure import settings whilst connected to wireless systems via network connection. When linked to a compatible receiver, you can scan the RF environment, monitor connected devices, and view the system log.
/ Frequency-Agile True Diversity UHF 5000 Series
/ DECT Wireless System (ESW) Engineered Sound® Wireless
/ Digital UHF Wireless Microphone System 3000 Digital Series
/ Wireless In-Ear Monitor System 3000 Series IEM
/ Frequency-Agile True Diversity UHF 2000 Series
/ Digital Wireless System System 20 Pro
/ Frequency-Agile True Diversity UHF 3000 Series
WIRELESS SYSTEMS / FREQUENCY
Audio-Technica - Frequency bands versus wireless series
/ Rack-Mount Digital Wireless Systems System 10 Pro
/ Rack-Mount Digital Wireless Systems System 10
/ Antenna Switching Diversity UHF Wireless Systems AT-One
Frequency from > to
TV Channel 21222324252627282930313233343536373839404142434445464748495051525354555657585960 X LTE X Duplex gap
LTE X 70 DECT ISM
Performance
Live Sound
Install Corporate / hotel conference room
Broadcast & Production
5000 Series Receiver
DG1 470.125 to 699.875 MHz
Rec. Channel Count
School / house of worship /
Large venues / Stadium
Film & Location sound
Operating range
Indoor range
Outdoor range
Analog / Digital
Hobby music
Prof. music
Rental company
Broadcast studio
Theater
ENG Live sport
DE1 470.125 to 590.000 MHz
5000 Series Transmitter
100 m •••• •••• > 40 A
• ••• ••• ••• • ••• ••• •••
••• ••
EG1 580.000 to 699.875 MHz
5000 Series
Engineered Sound® Wireless
1.9 GHz
Engineered Sound Wireless
100 m •••• •
••• ••• ••• ••
••
> 40 D
3000 Digital Series
3000 Digital Series
EE1E 530.000 - 589.975 MHz
FF1E 606.000 - 665.975 MHz
DE2E 470.125 - 529.975 MHz
120 m •••• •••• > 40 D
• •• •• •• ••• ••• ••• ••
•• ••
100 m •••• ••••
•• ••• ••• ••• •• ••• ••• •
••• ••
3000 Series
40
A
DE2 470.125 - 529.975 MHz
EE1 530.000 - 589.975 MHz
EF1 590.000 - 649.975 MHz
FG1 650.000 - 699.875 MHz
3000 Series
90 m •••• •••• > 40 A
•• ••• ••• ••• •• • ••• •• •• * ••• ••
3000 Series IEM
3000 Series Network receiver
DE2 470.125 - 529.975 MHz
EE1 530.000 - 589.975 MHz
EF1 590.000 - 649.975 MHz
FG1 650.000 - 699.875 MHz
100 m •••• ••••
•• • •• •• ••• ••• •
DF2 470.125 to 607.875 MHz
2000 Series
30
A
3000 Series IEM
EG2 580.000 to 713.850 MHz
60 m ••• •
•• •• •
•• •••
System 20 Pro
20
D
U-band 606.500 - 631.000 MHz
I-band 487.125 - 506.500 MHz
- D-band 656.125 - 678.500 MHz
2000 Series
60 m ••• •
•• •• •
••• •••
System10 Pro
10
D
System 10 System 10 Pro System 20 Pro
2.4 GHz
•• •
••• ••
•
••• •
••
•
System10
30 m
8
D
DE3 482.625 - 511.375 MHz
HH2 824.400 - 830.850 MHz 863.300 - 864.700 MHz
AT-One
60 m ••• •••
••• • • • ••• •••
AT-One
4
A
Note that some frequency bands might not be available in country or region in which you live, or could come with a limited tuning bandwidth/transmitting power due to local regulations.
* Should be combined with 3000 Series
audio-technica wireless systems guide - 7
6 - audio-technica wireless systems guide
WIRELESS SYSTEMS / 5000 SERIES
5000 SERIES / WIRELESS SYSTEMS
back
/ Dante® Receiver ATW-R5220DAN
back
/ Receiver ATW-R5220
5000 Series Operating Frequencies
Receiver: Band DG1: 470.125 to 699.875 MHz
Band GH1: 700.125 to 819.875 MHz
cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables.
Transmitter: Band DE1: 470.125 to 590.000 MHz
Band EG1: 580.000 to 699.875 MHz Band GH1: 700.125 to 819.875 MHz
Minimum Frequency Step
25 kHz
Modulation Mode Operating Range
FM
5000 Series Frequency-Agile True Diversity UHF Wireless Systems
100 m
ATW-R5220/ATW-R5220DAN Receiving System
True diversity
Image Rejection
80 dB nominal
/ Body-Pack Transmitter ATW-T5201
Sensitivity
18 dBuV at 60 dBA S/N ratio (50 ohms termination)
Comprehensive tuning bandwith For maximum versatility in ever-congested RF environment, the dual-channel receiver provides a tuning bandwidth of 230 MHz or 120 MHz (depending on frequency band). Both transmitters (ATW-T5202 and ATW-T5201) feature a tuning bandwidth of 120 MHz and are available in different frequency ranges to provide complete coverage of the receiver’s bandwidth. This allows the user to set up systems with high channel counts, whilst offering the flexibility to tune to open spectrum wherever you travel. Dual compander for incredible audio quality Designed for use on professional tours, in stadiums, concert halls, festivals and other demanding audio environments, the Audio-Technica 5000 Series offers the highest-quality wireless live sound, with dual-compander circuitry that processes high and low frequencies separately for unparalleled frequency response and dynamic range. Designed for professionals The body-pack transmitter provides highest possible wearing comfort due to its small size - 64 mm × 70 mm × 17 mm, robust and ergonomic full metal body with concealed soft-touch controls, rugged cH-style connector for secure connection - just to name a few features that meet the needs of professional users. High channel count The antenna cascade output connects up to 8 receivers, allowing a single pair of antennas to feed 16 channels of wireless.
Maximum Output Level
XLR, balanced, +18 dBV
Headphone Output
6.3 mm (1/4”) TRS stereo 180 mW, typical
Antenna Input
BNC-type, 50 ohms 12 V DC, 150 mA (combined)
ATW-T5201 Frequency Response
23 to 16,300 Hz
Dynamic Range
Mic input: 120 dB or higher (A-weighted), typical Inst input: 107 dB or higher (A-weighted), typical
Input Connection
cH-style screw-down 4-pin connector
Spurious Emissions Maximum Deviation
Following federal and national regulations
/ Interchangeable Microphone Capsules (IMC) (see page 4)
±40 kHz (THD:10%)
Total Harmonic Distortion
1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
RF Power Output
High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Battery Life Dimensions Net Weight
High: 7 hours, Mid: 9 hours, Low: 10.5 hours (alkaline)
64 mm × 70 mm × 17 mm (W × D × H)
Approx. 92 g
ATW-T5202 Frequency Response
33 to 16,300 Hz Depending on attached microphone element
/ Handheld Transmitter Body ATW-T5202
Dynamic Range
116 dB or higher (A-weighted), typical
Microphone Element Spurious Emissions Maximum Deviation
Interchangeable industry standard thread
Following federal and national regulations
±40 kHz (THD:10%)
Total Harmonic Distortion
1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
RF Power Output
High: 50 mW, Mid: 10 mW, Low: 2 mW (switchable), at 50 ohms
Battery Life Dimensions Net Weight
High: 6.5 hours, Mid: 8 hours, Low: 9.5 hours (alkaline)
193 mm long, 37 mm maximum diameter
Dante®
Network
Interchangeable Capsules
cH-Connector
200 g
audio-technica wireless systems guide - 9
8 - audio-technica wireless systems guide
DIGITAL WIRELESS SYSTEMS / ENGINEERED SOUND® WIRELESS
ENGINEERED SOUND® WIRELESS / DIGITAL WIRELESS SYSTEMS
front
back
/ 8ch Receiver ESW-R4180DAN (Dante™) ESW-R4180LK (AT-Link) The Engineered Sound Wireless System is available in two configurations:
/ Body-Pack Transmitter ESW-T4101
/ Handheld Transmitter ESW-T4102/C510
/ Desk Stand Transmitter ESW-T4107
/ Boundary Microphone Transmitter ESW-T4106
Engineered Sound® Wireless DECT Wireless System (ESW)
/ for up to 8 transmitters with one power supply Cascade recharging stations
High Channel Count Select from standard mode (Up to 96 channels) to minimize latency, and HD mode (Up to 192 channels) to maximize the number of channels. Best-in-Class Battery Life Internal batteries offer all-day operation on full charge, as well as rapid recharge ability in as little as 2 hours. Secure Communications Stay confident that your communications will remain safe and secure with AES256 encryption support.
/ Two-Bay Charging Station ESW-CHG4
Dante®
Interchangeable Capsules
cH-Connector
Charging contacts
Network
/ Four-Bay Charging Station ESW-CHG5
/ Power Supply Unit for ESW-CHG4 and ESW-CHG5 AD-SA1230XA
audio-technica wireless systems guide - 11
10 - audio-technica wireless systems guide
DIGITAL WIRELESS SYSTEMS / ENGINEERED SOUND® WIRELESS
ENGINEERED SOUND® WIRELESS / DIGITAL WIRELESS SYSTEMS
Multi-hall complex / Exhibition centre
ESW-T4107 Modulation Mode
A-field: π / 2-BPSK; B-field: π / 4-QPSK
Microphone
ES Series modular gooseneck microphone- compatible
ESW-R4180LK (only one unit connected) 8 channel maximun per unit
ESW-R4180LK (multiple units connected) 16 channel maximun with 2 receivers
Battery
Lithium-ion battery LI-220 (included)
Battery Life
17 hours
Charging Time (USB)
Approx. 2 hours 40 minutes
Roaming function allows transmitters to switch between multiple receivers (Dante™).
USB Charging Connector
USB Type-C (USB 3.0)
Dimensions
90.5 mm x 129.4 mm x 47.4 mm (W x D x H)
Engineered Sound® Wireless Operating Frequencies
Weight (with battery)
535 g
1,880 to 1,900 MHz (Europe)
Operating Range
Max. 100 m (with RF Power set to Mid)
ESW-R4180LK Modulation mode
Dynamic Range
> 105 dB (A-weighted), typical
ESW-R4180LK
ESW-R4180LK
ESW-R4180LK
ESW-R4180LK
A-field: π/2-BPSK B-field: π/8-8PSK
Total Harmonic Distortion
< 1.0%
RF sensitivity
< -90 dBm
Maximum Simultaneous Use (recommended)
Standard: 96 channels; HD mode: 192 channels
Network interface
Audio-Technica LINK: 100 Mbps Audio-Technica LINK: RJ-45
I/O connector
Receiving System
True diversity
Power consumption Power requirement
2.4 W
+48 V DC (Audio-Technica LINK)
Latency
Standard: 16.7 ms typ.; HD mode: 24.0 ms typ.
Operating temperature range
-10ºC to +50ºC
Audio Sampling Rate
24 bits, 48 kHz
Dimensions
228.6 mm × 228.6 mm × 43.5 mm (W×D×H）
Encryption System
AES256
Weight (without accessories)
620 g
RF Output Power
Max: 250mW, High: 100 mW, Mid: 30 mW, Low: 10 mW, Min: 2 mW (switchable)
Included accessories
Mounting bracket
ESW-CG5 Power Supply
ESW-R4180DAN Modulation Mode
A-field: π / 2-BPSK; B-field: π / 8-8PSK
12 V DC, 3 A
RF Sensitivity
< -90 dBm
Charging Output
Charging 1 to 4 transmitters: 4.2 V DC, 1.5 A Charging 5 to 6 transmitters: 4.2 V DC, 1.1 A Charging 7 to 8 transmitters: 4.2 V DC, 0.7 A
Network
Dante: 1 Gbps; IP Control: 100 Mbps
I/O Connector
Network/Dante: RJ-45
Consumption
Charging 4 transmitters: 30.6 W
Power Consumption
4.8 W
Charging Time (ESW-T4106 / ESW-T4107)
1 to 4 transmitters: 100%-2h00 / 50%-0h50 5 to 6 transmitters: 100%-2h50 / 50%-1h10 7 to 8 transmitters: 100%-3h40 / 50%-1h40
ESW-T4101 Frequency Response (internal microphone) 20 to 20,000 Hz Modulation Mode
Network Interface
IP: 100 Mbps
A-field: π / 2-BPSK; B-field: π / 4-QPSK
Operating Temperatures
0°C to 40°C
Input Connection
Four pin screw-down cH-connector
Dimensions
209.9 × 303.9 × 65.4 mm (L × W × H)
Battery
Lithium-ion battery LI-220 (included)
ESW-R4180DAN (only one unit connected) 8 channel maximun per unit
ESW-R4180DAN (multiple units connected) 16 channel maximun with 2 receivers
Weight
866 g
Battery Life
25 hours
Included Accessories
Link cable, link plate, plate screws
Dimensions
56 mm x 23.5 mm x 90 mm (W x D x H)
Sold Separately
AC Adapter (AD-SA1230XA), AC cord
Weight (with battery)
112.3 g
ESW-T4102 Modulation Mode
ESW-CHG4 Power Supply
60 to 16,000 Hz
12 V DC, 3 A
Microphone Capsule
108 dB or higher (A-weighted), typical
Charging Output
Charging 1 to 4 transmitters: 4.2 V DC, 1.5 A Charging 5 to 6 transmitters: 4.2 V DC, 1.1 A Charging 7 to 8 transmitters: 4.2 V DC, 0.7 A Charging 2 transmitters: 15.6 W 4 chained stations/8 transmitters: 30.6 W 1 to 4 transmitters: 100%-2h00 / 50%-0h50 5 to 6 transmitters: 100%-2h50 / 50%-1h10 7 to 8 transmitters: 100%-3h40 / 50%-1h40 1 to 4 transmitters: 100%-3h00 / 50%-1h20 5 to 6 transmitters: 100%-4h10 / 50%-1h40 7 to 8 transmitters: 100%-5h20 / 50%-2h20
Battery
Cardioid, condenser
Battery Life
Following federal and national regulations
Consumption
Dimensions
±40 kHz (THD:10%)
Weight (with battery)
1.0 % or less (at 1 kHz, -20 kHz deviation)
Charging Time (ESW-T4101)
ESW-T4106 Frequency Response
Omnidirectional: 20 to 18,000 Hz; Cardioid: 20 to 18,000 Hz
Charging Time (ESW-T4102)
Modulation Mode
A-field: π / 2-BPSK; B-field: π / 4-QPSK
Network Interface
IP: 100 Mbps
Microphone Polar Pattern
Cardioid, Omnidirectional (selectable)
Operating Temperatures
0°C to 40°C
Battery
Lithium-ion battery LI-220 (included)
Dimensions
95 × 180 × 78.5 mm (L × W × H)
Battery Life
22 hours
Charging Time (USB)
Approx. 2 hours 40 minutes
Weight
532 g
USB Charging Connector
USB Type-C (USB 3.0)
Included Accessories
Link cable, link plate, plate screws, microphone suspension adapter
Dimensions
90.5 mm x 129.4 mm x 31.9 mm (W x D x H)
Sold Separately
AC/DC Adapter (AD-SA1230XA), power cord
Weight (with battery)
500 g
(1) Depending on environmental conditions.
audio-technica wireless systems guide - 13
12 - audio-technica wireless systems guide
DIGITAL WIRELESS SYSTEMS / 3000 DIGITAL SERIES
3000 DIGITAL SERIES / DIGITAL WIRELESS SYSTEMS
front
/ Dual-Channel Receiver ATW-DR3120DAN
back
cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables.
3000 Digital Series Operating Frequencies
Band DE2E: 470.125 to 529.975 MHz Band EE1E: 530.000 to 589.975 MHz Band FF1E: 606.000 to 665.975 MHzz
Minimum Frequency Step
25 kHz
Modulation Mode Operating Range
e microphone element used
120 m
Total Harmonic Distortion
0.1% or less (at 1 kHz, −20 dBFS)
3000 Digital Series Digital UHF Wireless Microphone System
ATW-DR3120DAN Dual-Channel Receiver Receiving System
/ Body-Pack Transmitter ATW-DT3101
True diversity
Image Rejection
70 dB
RF Sensitivity
−98 dBm (10−5 BER)
Maximum Output Level
18 dBV (Line), −12 dBV (Mic)
Uncompromising high-quality sound In addition to 24-bit / 48 kHz digital processing, the 3000 Digital Series features a wide 120 dB dynamic range. Our proprietary audio codec technology accurately represents high frequencies, making the system well suited for use with musical instruments, as well as voices. 60 MHz tuning range Features an extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment. Dante TM output The ATW-DR3120DAN features Dante™, providing a low-latency, high-performance network audio solution which is easy to implement, use and extend. Cost & Space Saving Up to five receivers can be cascaded together meaning no antenna distributor is required. Without the need for antenna distributors, the entire rack space can be slimmed down, reducing upstart, operating and travel costs. .
Antenna Input Antenna Power
BNC-type, 50 ohms
12 VDC, 150 mA (combined)
Power Supply
100 to 240 VAC (50/60 Hz)
Dimensions
483 mm × 385 mm × 44 mm (W × D × H)
Weight
Approx. 4.1 kg
ATW-DT3101 Body-Pack Transmitter RF Power Output
High: 20 mW, Mid: 10 mW, Low: 2 mW
Dynamic Range
Mic input: 120 dB or higher, A-weighted, typical Inst input: 108 dB or higher, A-weighted, typical Two alkaline or nickel-metal hydride 1.5 V AA batteries
/ Interchangeable Microphone Capsules (IMC) (see page 4)
Battery Type Battery Life
Nickel-metal hydride 1.5 V AA batteries: Approx. 7 hours (1900 mAh High), Approx. 9 hours (2500 mAh High); Alkaline 1.5 V AA batteries: Approx. 6 hours (High)
Dimensions
64 mm × 23 mm × 82 mm (W × D × H)
Input Connections
Four pin locking connector
Weight
Approx. 105 g
ATW-DT3102 Handheld Transmitter Body RF Power Output
/ Handheld Transmitter Body ATW-DT3102
High: 20 mW, Mid: 10 mW, Low: 2 mW
Dynamic Range
120 dB or higher, A-weighted, typical
Battery Type Battery Life
Two alkaline or nickel-metal hydride 1.5 V AA batteries
Nickel-metal hydride 1.5 V AA batteries: Approx. 7 hours (1900 mAh High), approx. 9 hours (2500 mAh High); Alkaline 1.5 V AA batteries: Approx. 6 hours (High)
Dante®
Interchangeable Capsules
cH-Connector
Network
Charging contacts
Dimensions
193 mm × 37 mm (without microphone capsule)
Weight
Approx. 205 g
audio-technica wireless systems guide - 15
14 - audio-technica wireless systems guide
WIRELESS SYSTEMS / 3000 SERIES
3000 SERIES / WIRELESS SYSTEMS
front
back
/ Receiver ATW-R3210
back
cH-style screw-down 4-pin connector for secure connection to A-T’s cH-style lavalier and headworn microphones, or cables.
/ Network-Enabled Receiver ATW-R3210N
/ Handheld Transmitter Body ATW-T3202
/ Body-Pack Transmitter ATW-T3201
3000 Series Frequency-Agile True Diversity UHF Wireless Systems
/ Interchangeable Microphone Capsules (IMC) (see page 4)
60 MHz tuning bandwidth The 3000 Series systems are available in several different frequency bands, and each features a wide 60 MHz tuning range. This allows the user to set up systems with high channel counts, whilst offering the flexibility to tune to open spectrum wherever you travel. Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. Backup frequency button Unique multifunction button on the handheld and body-pack transmitters can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered.
Network
Charging contacts
Interchangeable Capsules
cH-Connector
audio-technica wireless systems guide - 17
16 - audio-technica wireless systems guide
WIRELESS SYSTEMS / 3000 SERIES
3000 SERIES / SYSTEM CONFIGURATIONS / WIRELESS SYSTEMS
ATW-CHG3 Charging Station Charging Time
Approx. 6.5 hours (1,900 mAh rechargeable battery)
Power Supply
DC12V 3.0A
Power Consumption
4.9W (when 2 transmitters are charging) 27.4W (CHG3x5) (5 units are connected and 10 transmitters are charging)
Weight
400 g
Accessories
Separately available - AC adapter (AD-SA1230XA), ATW-CHG3 Link kit (AT8687)
/ Power Supply Unit for ATW-CHG3 AD-SA1230XA
/ Link Kit for ATW-CHG3 AT8687
3000 Series Operating Frequencies
Band DE2: 470.125 to 529.975 MHz Band EE1: 530.000 to 589.975 MHz Band EF1: 590.000 to 649.975 MHz Band FG1: 650.000 to 699.875 MHz Band HH3: 821.100 to 831.900 MHz and 863.100 to 864.900 MHz
Minimum Frequency Step
25 kHz
Modulation Mode
FM
Operating Range
100 m
ATW-R3210/ATW-R3210N Receiving System
True diversity
Image Rejection
60 dB nominal
Sensitivity
20 dBµV at 60 dBA S/N ratio (50 ohms termination)
/ 3000 Series - Body-pack System ATW-3211
Maximum Output Level
XLR, balanced, +14 dBV 6.3 mm (1/4"), unbalanced: +8 dBV (ATW-R3210 only)
Antenna Input
BNC-type, 50 ohms 12 V DC, 160 mA (combined)
One power supply feeds up to five chargers Up to five docks can be connected to one power supply (AD-SA1230XA - available separately) to charge a maximum of ten transmitters (per link one AT8687 is required - available separately). Monitoring and controlling The ATW-CHG3N networked version of the charging dock allows users to monitor the charging status of all transmitters in the linked docks (per link one AT8687 is required - available separately). Only the first dock must be an ATW-CHG3N, all linked docks (up to four) must be ATW-CHG3. Protection against misuse The dock automatically shuts off if alkaline or damaged batteries are detected in the transmitters.
ATW-T3201 Frequency Response
31 to 15,500 Hz
Dynamic Range
Mic input: 115 dB or higher (A-weighted), typical Inst input: 112 dB or higher (A-weighted), typical
/ 3000 Series - Handheld System with ATW-C510 ATW-3212/C510º
Input Connection
cH-style screw-down 4-pin connector
Spurious Emissions
Following federal and national regulations
Maximum Deviation
±38 kHz (THD:10%)
Total Harmonic Distortion
1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
RF Power Output
High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life
High: 8 hours, Low: 9 hours (alkaline) High: 9 hours, Low: 9.5 hours (Ni-MH 1900mAh)
Dimensions
64 mm x 82 mm x 23 mm (W x D x H)
/ 3000 Series - Handheld System with ATW-C710 ATW-3212/C710
Net Weight
Approx. 102 g
ATW-T3202 Frequency Response
Connect to outlet
/ Two-Bay Charging Station ATW-CHG3a / Two-Bay Networked Charging Station ATW-CHG3Na
25 to 16,700 Hz (Depending on attached microphone element)
AC adapter (AR-SA 1230XA)
Dynamic Range
115 dB or higher (A-weighted), typical
Microphone Element
Interchangeable industry standard thread
Network cable (Type: RJ45)
Spurious Emissions
Following federal and national regulations
ATW-CHG3 / ATW-CHG3N
ATW-CHG3
Maximum Deviation
±36 kHz (THD:10%)
Total Harmonic Distortion
1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
Up to 5 units (4 additional units connected)
RF Power Output
High: 30 mW, Low: 10 mW (switchable), at 50 ohms
Battery Life
High: 8 hours, Low: 9 hours (alkaline) High: 9 hours, Low: 9.5 hours (Ni-MH 1900mAh)
Dimensions
193 mm long, 37 mm maximum diameter
Net Weight
200 g
ATW-CHG3 Link kit (AT8687)
audio-technica wireless systems guide - 19
18 - audio-technica wireless systems guide
WIRELESS SYSTEMS / 3000 SERIES IEM
3000 SERIES IEM / WIRELESS SYSTEMS
front
back
/ Stereo Transmitter ATW-T3205
cH-style screw-down 4-pin connector for secure connection
3000 Series IEM Operating Frequencies
DF2: 470.125 to 607.875 MHz; EG2: 580.000 to 713.850 MHz
Minimum Frequency Step
25 kHz
Modulation Mode
FM
Nominal/Peak Deviation Frequency Response Stereo Separation Operating Range
±34 kHz nominal / ±45 kHz peak
40 Hz to 14,100 Hz
75 dB
3000 Series IEM 3000 Series Wireless In-Ear Monitor System
90 m
/ Stereo Receiver ATW-R3250
Dynamic Range
>90 dB, A-weighted, typical
Total Harmonic Distortion
<0.2% (at 1 kHz, +4dBu input)
ATW-T3205 RF Output Power Input Connection
High: 50 mW, Low: 10 mW (switchable) at 50 ohms
XLR-F type×2
138MHz tuning bandwidth The 3000 Series IEM systems are available in two different frequency bands, and each features a wide 138 MHz tuning range. This allows the user to set up systems with high channel counts, whilst offering the flexibility to tune to open spectrum wherever you travel. Pro in-ear monitors are part of the package The 3000 Series Wireless IEM comes with the ATH-E40 in-ear monitor headphones for professional performance right out of the box. Stay in control Audio-Technica’s Wireless Manager software provides a powerful, easy-to-use network tool for setting up, controlling and monitoring the IEM system. Frequencies can be easily scanned on the receiver and then synced with the transmitter via IR sync functionality to create frequency plans..
Maximum Input Level
XLR-F type: +24 dBu (at 0 dB sensitivity)
Output Connection
6.3 mm (1/4”) TRS×2
Network
100BASE-T
Network Port Power Supply
RJ-45
100 to 240 V AC (50/60 Hz) to 12V DC 1 A (center positive) switched mode external power supply
Antenna Output
BNC-type, 50 ohms
/ Dynamic In-Ear Headphones ATH-E40
Dimensions
210 mm ×191 mm ×43.4 mm (W×D×H)
Weight
1,100 g
ATW-R3250 Receiving System
Antenna diversity Audio output cable performs as a secondary antenna to ensure stable RF performance.
Image Rejection
>80 dB, typical
RF Sensitivity
20 dBuV at 60 dBA S/N ratio (50 ohms termination)
Headphone Output Jack
3.5 mm (1/8”) TRS stereo mini-jack
Headphone Output
40 mW (at 12 ohms)
/ Two-Bay Charging Station ATW-CHG3a / Two-Bay Networked Charging Station ATW-CHG3Na
Antenna Input
SMA type, 50 ohms
Dimensions
64 mm ×23 mm ×82 mm (W×D×H)
Weight
102 g (without batteries)
Charging contacts
cW-Connector
Network
Battery Current/Life
4 to 6 hours (alkaline); 5 to 7 hours (Ni-MH, 1900 mAh); 11 to 13 hours (Lithium)
Battery Type
3 V DC (two 1.5 V AA) (not included)
audio-technica wireless systems guide - 21
20 - audio-technica wireless systems guide
WIRELESS SYSTEMS / 2000 SERIES
2000 SERIES / SYSTEM CONFIGURATIONS / WIRELESS SYSTEMS
front
back
/ Receiver ATW-R2100c
Locking 4-pin microphone connector for use with Audio-Technica cW-style wireless body-pack transmitters.
/ Handheld Transmitter ATW-T220c
2000 Series Operating Frequencies
I Band: 487.125 to 506.500 MHz U Band: 606.500 to 631.000 MHz D Band: 656.125 to 678.500 MHz F Band: 854.900 to 864.900 MHz
/ Body-pack Transmitter ATW-T210c
Max. Number of Channels
10
Modulation Mode Operating Range
FM
100 m
ATW-R2100c Receiving System
2000 Series Frequency-Agile True Diversity UHF Wireless Systems
/ Two-Bay Recharging Station ATW-CHG2
True diversity
Image Rejection
55 dB nominal, 50 dB minimum
Sensitivity
20dBµV (S/N 60dB at 5 kHz deviation, IEC-weighted)
Maximum Output Level
XLR, balanced, +14 dBV - 6.3 mm (1/4), unbalanced: +8 dBV
Antenna Input
BNC-type, 50 ohms 12 V DC, 60 mA (each)
ATW-T210c Frequency Response
Easy to use Easy setup, automatic scanning and other advanced wireless features - affordable as never before. Though the 2000b system is designed for professional use, the user does not need special training to operate it. Once unboxed, it’s ready to roll! Standard automatic frequency scanning finds and sets the best available channel at the touch of a button. Using multiple wireless systems simultaneously, as any of its 10 preset channels can be used together. 12V antenna power The ATW-R2100c receiver delivers a bias voltage of 12V / 60mA from each BNC antenna input, enabling the use of antenna boosters or other active components.
100 to 15,500 Hz
Dynamic Range
110 dB or higher (A-weighted), typical
Input Connection
cW-style lock-down 4-pin connector
Spurious Emissions Maximum Deviation
Following federal and national regulations
±40 kHz (THD:10%)
Total Harmonic Distortion
1.0 % or less (at 1 kHz, ±17.5 kHz deviation)
RF Power Output
High: 30 mW, Low: 10 mW (switchable)
Battery Life Dimensions Net Weight
High: 7 hours, Low: 9 hours (alkaline)
66 mm × 92 mm × 23 mm (W × D × H)
Approx. 81 g
/ 2000 Series - Body-pack System ATW-2110c
ATW-T220c Frequency Response
100 to 15,000 Hz
Dynamic Range
110 dB or higher (A-weighted), typical
Microphone Element Spurious Emissions Maximum Deviation
Cardioid, dynamic
Following federal and national regulations
±40 kHz (THD:10%)
Charging contacts
cW-Connector
/ 2000 Series - Handheld System ATW-2120b
Total Harmonic Distortion
1.0 % or less (at 1 kHz, ±20 kHz deviation)
RF Power Output
High: 30 mW, Low: 10 mW (switchable)
Battery Life Dimensions Net Weight
High: 7 hours, Low: 9 hours (alkaline)
232 mm long, 48 mm maximum diameter
252 g
audio-technica wireless systems guide - 23
22 - audio-technica wireless systems guide
Wireless Systems | System 10 PRO DIGITAL WIRELESS SYSTEMS / SYSTEM 10
SYSTEM 10 PRO / SYSTEM CONFIGURATIONS / DIGITAL WIRELESS SYSTEMS
System 10 Digital Wireless Systems
front
front
/ Dual Channel Receiver ATW-R1320
/ Single Channel Receiver ATW-R1310
Locking 4-pin microphone connector for use with Audio-Technica cW-style wireless body-pack transmitters.
Easy to use System 10 is a digital high-fidelity wireless system designed to provide 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display. Three levels of diversity assurance System 10 provides three levels of diversity: frequency, time and space. Frequency diversity transmits the signal on two frequencies simultaneously for better protection against frequency interference. Time diversity sends the signal twice to maximise signal integrity. Finally, space diversity uses two antennas on each transmitter and receiver to optimize immunity against multipath interference.
back
/ Body-Pack Transmitter ATW-T1001 (specifications, see page 20)
/ Boundary Microphone Transmitter ATW-T1006
/ Microphone Desk Stand Transmitter ATW-T1007
Frequency 2.4 GHz
System 10 PRO Operating Frequencies Max. Number of Channels
/ Handheld Transmitter- ATW-T1002 (specifications, see page 20)
cW-Connector
2.4 GHz ISM Band
10
Audio Sampling Operating Range
24 bit / 48 kHz
60 m
/ System 10 PRO - Rack-Mount Digital Wireless System ATW-1301
ATW-R1310 & ATW-R1320 Receiving System
Diversity (frequency / time / space)
Maximum Output Level
XLR, balanced, +6 dBV - 6.3 mm (1/4), unbalanced: 0 dBV
ATW-T1006 Maximum Input Sound Level
/ System 10 PRO - Rack-Mount Digital Wireless System ATW-1311
139 dB SPL
RF Power Output
10 mW
Spurious Emissions
Following federal and national regulations
Internal Battery Battery Rating Battery Life Dimensions
3.7 V Rechargeable Li-ion Battery
5.5 Wh; 1,460 mAh
/ System 10 PRO - Rack-Mount Digital Wireless System ATW-1312
9 hours (Battery charging time: 4 hours 30 minutes)
Featuring Remote-Mountable Receiver Units
System 10 PRO Digital Wireless Systems
96.1 mm W × 38.0 mm H × 122.8 mm D
Net Weight
408 grams
ATW-T1007 RF Power Output Spurious Emissions
10 mW
/ System 10 PRO - Rack-Mount Digital Wireless System ATW-1302
Following federal and national regulations
A compact and expandable system With an RJ12 cable supplied with each system, it is possible to connect up to 5 frames (10 receivers). While many systems can operate without being connected, this is not recommended. Indeed, linking the systems to create a more stable environment in which receivers are coordinated for the reception, transmission and frequency allocation avoids signal loss and optimizes the simultaneous use of the 10 channels.
Phantom Power Internal Battery Battery Rating Battery Life Dimensions
12V DC
3.7 V Rechargeable Li-ion Battery
5.5 Wh; 1,460 mAh
9 hours (Battery charging time: 4 hours 30 minutes)
/ System 10 PRO - Rack-Mount Digital Wireless System ATW-1322
96.1 mm W × 44.2 mm H × 122.8 mm D
Net Weight
392 grams
audio-technica wireless systems guide - 25
24 - audio-technica wireless systems guide
DIGITAL WIRELESS SYSTEMS / SYSTEM 10 STACK-MOUNT
SYSTEM 10 CAMERA-MOUNT / DIGITAL WIRELESS SYSTEMS
System 10 Digital Wireless Systems
System 10 Camera-Mount Portable Camera-Mount Digital Wireless Systems
Automatic frequency selection The System 10 automatically changes its frequency. Unlike other systems on the market that attach to 2 or 4 frequency, the System 10 will constantly “monitor” the frequencies and switch if necessary. Thus, there are always a good 2 frequencies in the system, and the user does not need to manually intervene.
Small and compact design With its compact and portable design, the System 10 Digital Wireless Camera System is ideal for video production, reporting and all intermediate mobile applications, the receiver offers several mounting options to suit a wide variety of cameras and recording devices. Each System 10 camera mount wireless system includes a camera mounting spigot in addition to the receiver and the transmitter.
/ Receiver ATW-R1100
System 10 - Stack-Mount Operating Frequencies
2.4 GHz ISM Band
Max. Number of Channels
8
Audio Sampling Operating Range
24 bit / 48 kHz
30 m
/ Camera-Mount Receiver ATW-R1700
ATW-R1100 Receiving System
/ Handheld Transmitter ATW-T1002 (see page 20) / Body-Pack Transmitter ATW-T1001 (see page 20)
Diversity (frequency / time / space)
Locking 4-pin microphone connector for use with Audio-Technica cW-style wireless body-pack transmitters.
Maximum Output Level
XLR, balanced, +6 dBV - 6.3 mm (1/4), unbalanced: 0 dBV
ATW-T1001 Frequency Response
20 to 20,000 Hz
Dynamic Range
109 dB or higher (A-weighted), typical
/ Body-Pack Transmitter ATW-T1001
Input Connection
cW-style lock-down 4-pin connector
Spurious Emissions
Following federal and national regulations
System 10 - Camera-Mount Operating Frequencies
Total Harmonic Distortion
0.05 % or less
RF Power Output
10 mW
2.4 GHz ISM Band
Battery Life Dimensions Net Weight
7 hours (alkaline)
Max. Number of Channels
8
Handheld Transmitter / ATW-T1002
System 10 - Camera-mount Body-pack System ATW-1701
72 mm × 107 mm × 25 mm (W × D × H)
Audio Sampling Operating Range
24 bit / 48 kHz
Approx. 100 g
30 m
ATW-T1002 Frequency Response
ATW-R1700 Receiving System
20 to 20,000 Hz
Diversity (frequency / time / space) 3.5 mm, TRS balanced, +6 dBV 3.5 mm, TRS unbalanced: 0 dBV
/ System 10 - Body-pack System ATW-1101
Dynamic Range
109 dB or higher (A-weighted), typical
Maximum Output Level
Microphone Element Spurious Emissions
Unidirectionnal, dynamic
Following federal and national regulations
Battery Type Battery Life Dimensions
Internal Battery: 3.7V rechargeable Li-ion battery
/ System 10 - Camera-mount Handheld System ATW-1702
Total Harmonic Distortion
0.05 % or less
12 hours (Battery charging time: 4 hours 30 minutes)
RF Power Output
10 mW
/ System 10 - Handheld System ATW-1102
56 mm × 91 mm × 28 mm (W × D × H)
Battery Life Dimensions Net Weight
7 hours (alkaline)
Weight
Approx 105 g
255 mm long, 50 mm maximum diameter
280 g
audio-technica wireless systems guide - 27
26 - audio-technica wireless systems guide
Wireless Systems | System 10 PRO DIGITAL WIRELESS SYSTEMS / SYSTEM 20 PRO
SYSTEM 20 PRO / SYSTEM CONFIGURATIONS / DIGITAL WIRELESS SYSTEMS
System 20 PRO Digital Wireless System
Frequency 2.4 GHz
Overall System Specifications Operating frequencies
ATW-T1402 Modulation mode
2402 - 2480MHz
GFSK
Dynamic range
RF output
120dB (A-weighted) typical
10mW EIRP
cW-Connector
Total harmonic distortion < 0.05% typical Operating range
RF sensitivity Whip antenna
-90dBm typical True diversity Dynamic type Hypercardioid
60m (Open environment with no interfering signals) 20 to 20000Hz (Varies depending on the microphone to be installed)
System Frequency Response
Microphone type
Microphone Directional Characteristics
Delay Standard: 2.8ms, HD mode: 6.7ms Audio sampling frequency Standard: 24bit/48kHz, HD mode: 24bit/48kHz Encryption method AES128 Max. simultaneous use
Battery
DC3V (2 AA batteries)
Operating temperature
5ºC to +40ºC
Battery Life
Standard: 10 channels, HD mode: 20 channels (Depends on the region and environment)
AA alkaline batteries: Approx. 18 hours, AA nickel-hydrogen batteries: Approx. 16 hours and 30 minutes, AA lithium batteries: Approx. 35 hours (Varies depending on usage conditions)
Dimensions
265.0mm x 53.7mm
Weight
300g
ATW-R1440 ATW-RC14 Receiver unit external connection port
Included accessory
Microphone holder AT8456a, Conversion screw adapter (3/8 - 5/8)
RJ45
/ 4-Channel Receiver ATW-R1440
NETWORK Port
RJ45: RJ45 Fast Ethernet
A New Level of Functionality and Convenience
LINK IN/OUT port
RJ12
ATW-T1406 Modulation mode
front
Output Level
LINE max: +22dBu (+20dBV), LINE Unity: -20dBu (-22dBV), MIC max: -12dBu (-10dBV), MIC Unity: -50dBu (-52dBV)
GFSK
When we launched the System 10 PRO rack-mount receiver we took 2.4 GHz wireless microphone systems to a new level of functionality and convenience. Now, with the System 20 PRO we take it even further, offering a self-managing, plug-and-play 2.4 GHz system that’s scalable to 20 channels and delivers the same dependable, high-quality audio – regardless of where you set it up. Designed for hassle-free deployment, the system overcomes many challenges of conventional wireless microphones, such as frequency coordination, complex intermodulation calculations, and remote antenna cabling.
RF output
10mW EIRP
RF sensitivity Whip antenna
-90dBm typical True diversity
Power consumption
3.7W
Power supply
DC12V 0.5A (AC adapter)
Maximum input sound pressure level
139dB SPL
Operating temperature
0ºC to +40ºC
Microphone type
Capacitor type
Dimensions
209.8mm x 165.6mm x 42.5mm (W x D x H)
Microphone Directional Characteristics Operating temperature
Cardioid
Weight
740g
Included accessory
Blade tip for AC adapter and AC adapter, Rack mount adapter (short), Rack mount adapter (long), Fixing screws x 5, Connecting cable (30cm), Rubber feet x 4
5ºC to +40ºC
Built-in battery Battery Life Charging time
3.7V lithium-ion battery (5.5Wh 1460mAh)
/ Body-Pack Transmitter ATW-T1401 Locking 4-pin microphone connector for use with Audio-Technica cW-style wireless body-pack transmitters.
Approx. 12 hours (Varies depending on usage conditions) Approx. 3 hours and 10 minutes (Varies depending on usage conditions)
ATW-RU14 Modulation mode
Easy Installation
GFSK
USB Charging Port
USB Type-C (USB 2.0)
Dimensions
90.5mm x 129.4mm x 31.9mm (W x D x H)
RF output
10mW EIRP
Capable of receiving up to four transmitters, the system’s ATW-R1440 receiver makes installation a breeze. Receiver units can remain docked in the half-rack chassis or be mounted remotely (up to 328 feet away) via Ethernet cable for added versatility. Up to five chassis can be linked using the included RJ12 cable, creating a stable, multichannel system with the simultaneous use of up to 20 channels. But the user is always free to choose the most effective operation mode for a given situation: Standard mode (10 channels) to minimise latency or HD mode (20 channels) to maximise channel count.
Weight
510g (including battery)
RF sensitivity
-90dBm typical
Included accessory
USB power adapter, Blade tip for USB power adapter, USB cable (1.5 m)
Whip antenna
1/2 Dipole Antenna Diversity
External connection port
RJ45
Power supply
DC12V (RC14)
Operating temperature
0ºC to +40ºC
ATW-T1407 Modulation mode
Dimensions
86.0mm x 70.2mm x 18.7mm (W x D x H)
GFSK
/ Handheld Microphone Transmitter ATW-T1402
Weight
77g
RF output
10mW EIRP
RF sensitivity Whip antenna Microphone
-90dBm typical True diversity
ATW-T1401 Modulation mode
Gooseneck microphone support
GFSK
Phantom power supply Operating temperature
DC24V
RF output
10mW EIRP
5ºC to +40ºC
/ Two-Bay Networked Charging Station ATW-CHG3Na
RF sensitivity Whip antenna
-90dBm typical True diversity
/ Desk Stand Transmitter ATW-T1407
Built-in battery
3.7V lithium-ion battery (5.5Wh 1460mAh)
Battery Life
Without LED: Approx. 12 hours, With LED: Approx. 8 hours (Varies depending on usage conditions) Approx. 3 hours and 10 minutes (Varies depending on usage conditions)
Input connection
Four pin locking connector: Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +10V
/ Two-Bay Charging Station ATW-CHG3a
Charging time
Battery
DC3V (2 AA batteries)
Operating temperature
5ºC to +40ºC
USB Charging Port
USB Type-C (USB 2.0)
Battery Life
AA alkaline batteries: Approx. 15 hours, AA nickel-hydrogen batteries: Approx. 14 hours and 30 minutes, AA lithium batteries: Approx. 29 hours (Varies depending on usage conditions)
Dimensions
90.5mm x 129.4mm x 47.6mm (W x D x H)
Weight
490g (including battery)
/ Boundary Microphone Transmitter ATW-T1406
Included accessory
USB power adapter, Blade tip for USB power adapter, USB cable (1.5 m)
Dimensions
63.7mm x 22.7mm x 107.4mm (W x D x H)
Weight
80g (without batteries)
audio-technica wireless systems guide - 29
28 - audio-technica wireless systems guide
WIRELESS SYSTEMS / AT-ONE
AT-ONE / SYSTEM CONFIGURATIONS / WIRELESS SYSTEMS
AUDIO OUT
ANT B
ANT A
DC 12V 500mA
SQ
LINE MIC
BALANCED
UNBALANCED
front
back
/ Receiver ATW-R1
Locking 4-pin microphone connector for use with Audio-Technica cW-style wireless body-pack transmitters.
AT-One Operating Frequencies
Band DE3: 482.625 to 511.375 MHz Band HH2: 824.400 to 830.850 MHz
/ Body-pack Transmitter ATW-T1
& 863.300 to 864.700 MHz
Max. Number of Channels
2 x 4
Modulation Mode Operating Range
FM
60 m
AT-One Wireless System
ATW-R1 Receiving System
Antenna switching diversity
Image Rejection
55 dB minimum
Sensitivity
10 dBμV (S/N 60 dB @ 20 kHz deviation)
Maximum Output Level
XLR, balanced, +4 dBV - 6.3 mm (1/4), unbalanced: –2 dBV
Antenna Input
BNC-type, 50 ohms 12 V DC, 100 mA (each)
/ Handheld Transmitter ATW-T3
ATW-T1 Frequency Response
Easy to use AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antenna, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry-level price. The AT-One’s frequency plan is divided into two groups with four available channels in each group. All four channels in a group can be used simultaneously. Cardioid condenser capsule – induction loop ready The condenser microphone capsule in the ATW-T1 handheld transmitter prevents inductive feedback from nearby hearing loops. 12V antenna power The ATW-R1 receiver delivers a bias voltage of 12V / 100mA from each BNC antenna input, enabling the use of antenna boosters or other active components.
60 to 16,000 Hz
Dynamic Range
103 dB or higher (A-weighted), typical
Input Connection
cW-style lock-down 4-pin connector
Spurious Emissions Maximum Deviation
Following federal and national regulations
±40 kHz (THD:10%)
Total Harmonic Distortion
1.0 % or less (at 1 kHz, –20 kHz deviation)
RF Power Output
10 mW
Battery Life Dimensions Net Weight
10 hours (alkaline)
66 mm × 98 mm × 22 mm (W × D × H)
Approx. 71 g
/ AT-One - Body-pack System ATW-11
ATW-T3 Frequency Response
60 to 16,000 Hz
Dynamic Range
108 dB or higher (A-weighted), typical
Microphone Element Spurious Emissions Maximum Deviation
Cardioid, condenser
Following federal and national regulations
±40 kHz (THD:10%)
/ AT-One - Handheld System ATW-13
Total Harmonic Distortion
1.0 % or less (at 1 kHz, -20 kHz deviation)
RF Power Output
10 mW
Battery Life Dimensions Net Weight
10 hours (alkaline)
cW-Connector
268 mm long, 52 mm maximum diameter
277 g
audio-technica wireless systems guide - 31
30 - audio-technica wireless systems guide
Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52-53 Page 54-55 Page 56-57 Page 58Made with FlippingBook - professional solution for displaying marketing and sales documents online