Wireless catalogue 2024 EN

WIRELESS SYSTEMS / 3000 SERIES IEM

3000 SERIES IEM / WIRELESS SYSTEMS

front

back

/ Stereo Transmitter ATW-T3205

cH-style screw-down 4-pin connector for secure connection

3000 Series IEM Operating Frequencies 

DF2: 470.125 to 607.875 MHz; EG2: 580.000 to 713.850 MHz



Minimum Frequency Step 

25 kHz

Modulation Mode 

FM

Nominal/Peak Deviation  Frequency Response  Stereo Separation  Operating Range 

±34 kHz nominal / ±45 kHz peak

40 Hz to 14,100 Hz

75 dB

3000 Series IEM 3000 Series Wireless In-Ear Monitor System

90 m

/ Stereo Receiver ATW-R3250

Dynamic Range 

>90 dB, A-weighted, typical

Total Harmonic Distortion 

<0.2% (at 1 kHz, +4dBu input)

ATW-T3205 RF Output Power  Input Connection 

High: 50 mW, Low: 10 mW (switchable) at 50 ohms

XLR-F type×2

138MHz tuning bandwidth The 3000 Series IEM systems are available in two different frequency bands, and each features a wide 138 MHz tuning range. This allows the user to set up systems with high channel counts, whilst offering the flexibility to tune to open spectrum wherever you travel. Pro in-ear monitors are part of the package The 3000 Series Wireless IEM comes with the ATH-E40 in-ear monitor headphones for professional performance right out of the box. Stay in control Audio-Technica’s Wireless Manager software provides a powerful, easy-to-use network tool for setting up, controlling and monitoring the IEM system. Frequencies can be easily scanned on the receiver and then synced with the transmitter via IR sync functionality to create frequency plans..

Maximum Input Level 

XLR-F type: +24 dBu (at 0 dB sensitivity)

Output Connection 

6.3 mm (1/4”) TRS×2

Network 

100BASE-T

Network Port  Power Supply 

RJ-45

100 to 240 V AC (50/60 Hz) to 12V DC 1 A (center positive) switched mode external power supply

Antenna Output 

BNC-type, 50 ohms

/  Dynamic In-Ear Headphones ATH-E40

Dimensions 

210 mm ×191 mm ×43.4 mm (W×D×H)

Weight 

1,100 g

ATW-R3250 Receiving System 

Antenna diversity Audio output cable performs as a secondary antenna to ensure stable RF performance.

Image Rejection 

>80 dB, typical

RF Sensitivity 

20 dBuV at 60 dBA S/N ratio (50 ohms termination)

Headphone Output Jack 

3.5 mm (1/8”) TRS stereo mini-jack

Headphone Output 

40 mW (at 12 ohms)

/ Two-Bay Charging Station ATW-CHG3a /  Two-Bay Networked Charging Station ATW-CHG3Na

Antenna Input 

SMA type, 50 ohms

Dimensions 

64 mm ×23 mm ×82 mm (W×D×H)

Weight 

102 g (without batteries)

Charging contacts

cW-Connector

Network

Battery Current/Life 

4 to 6 hours (alkaline); 5 to 7 hours (Ni-MH, 1900 mAh); 11 to 13 hours (Lithium)

Battery Type 

3 V DC (two 1.5 V AA) (not included)

audio-technica wireless systems guide - 21

20 - audio-technica wireless systems guide

Made with FlippingBook - professional solution for displaying marketing and sales documents online