WIRELESS SYSTEMS / APPLICATION 5
APPLICATION 5 / WIRELESS SYSTEMS
System 10 PRO Multi-channel wireless system for install
This solution is aimed at fixed installations where the use of UHF TV bands is not preferred, such as in locations with a restricted RF environment or where the customer wishes to avoid licensing costs and the need for frequency coordination. Typical applications for this include educational facilities such as schools or universities, multi-function rooms, or conference centres.
ATW-RU13
This application is based around our System 10 Pro wireless system. System 10 does not use the UHF TV band frequency spectrum (470 - 865 MHz) associated with our other wireless products but operates on the 2.4GHz spectrum, most used for WLAN and Bluetooth® transmission. 2.4GHz offers many benefits, but you must also consider its limitations when using it for wireless audio. The immediate advantage is that System 10 Pro is completely license free in almost all countries and requires no frequency planning by the installer or operator. However, due to the small wavelength of the 2.4GHz signal (around 12cm), the operating range is shorter than our other wireless systems which use the lower UHF range. This solution is not ideal for open-air scenarios, where long operating distance is required. However, reduced operating range can also have benefits. For example, if multiple rooms located side-by-side all require a dedicated wireless system, you can reuse the same spectrum by using System 10 Pro in adjacent rooms – very little physical separation between rooms is required. Another challenge with the 2.4GHz range is the parallel use of Wi-Fi alongside our wireless system. In this case, it is recommended to utilise 5.8GHz for Wi-Fi connectivity in place of 2.4GHz. If this is not possible, the placement of your wireless microphone receiver becomes very important. Here is why System 10 Pro offers the right solution. 2.4GHz antenna cables suffer from higher power losses over their cable run than UHF frequencies. At the same time, many installers do not wish to locate audio racks of receivers in the meeting room, but instead place them in a separate A/V room with the audio mixer and other equipment. With System 10 Pro, the ATW-RU13 receiver unit can be removed and mounted remotely, connecting to the ATW-RC13 via standard ethernet cable. The ATW-RC13 can stay in the audio rack, whilst the ATW-RU13 can be mounted up to 100m away – on a wall, in the presenter podium, or hidden above the false ceiling in the room. The ATW-RU13 receiver unit is compact in size, and its included wall-mount housing can be painted in any colour to conceal it further. Ensure to mount ATW-RU13 units as close as possible to the area where the wireless microphones will be used and aim to position any Wi-Fi access points at the opposite side of the room for maximum signal stability. The compatible Audio-Technica wireless system for this solution is the System 10 Pro.
Cat. 5e Cable
ATW-RC13
To Speakers
ATDM-0604 ATDM-0604a
LAN Connection for Web Remote Manager Computer Audio I/O
Equipment used
ATW-T1001
ATW-T1002
ATDM-0604 ATDM-0604a
or
6x
3 x ATW-R1320
Product table Quantity Code
ATW-T1006
ATW-T1007
Description
Alternative
ATW-R1320
3
System 10 Pro Dual Channel Receiver
or
ATW-T1006
6
System 10 Boundary Microphone Transmitter
ATW-T1001, ATW-T1002, ATW-T1007
ATDM-0604a
1
Digital SmartMixer
audio-technica wireless systems guide - 45
44 - audio-technica wireless systems guide
Made with FlippingBook - professional solution for displaying marketing and sales documents online